Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 7 of 7 for “"bond and development"”.
-
Bond and Development Length in Concrete Beams with Exposed Reinforcement
… areas are often located within the lap splices and curtailment zones of the primary reinforcement. This can lead to inadequate bar development lengths and the possibility of failures. In order to better predict the residual strength of these deteriorated bridges, a test program was designed, …
-
Bending and bond behavior and design of concrete beams reinforced with fiber-reinforced plastic rebars
… twenty-four cantilever specimens subjected to bond forces, and twelve straight pull-out specimens. The following response of concrete beams reinforced with FRP rebars were investigated: pre- and post-cracking behavior, load-deflection and stress variations, elastic and ultimate load carrying …
-
Hooked Bar Anchorages and their Use in Noncontact Lap Splices
… the use of noncontact hooked bar lap splices and address the knowledge gap regarding the behavior of such splices, an extensive experimental and computational research program was conducted which is described in this dissertation. Fifty-eight large-scale beam-splice specimens containing hooked …
-
Anchorage Strength of Conventional and High-Strength Hooked Bars in Concrete
… strength of hooked bars are investigated and design guidelines for the development length of hooked bars that apply to both conventional and high-strength steel and concrete are presented. In this study, 337 beam-column joint specimens were tested. Parameters included number of hooks (2, …
-
ANCHORAGE OF HEADED REINFORCING BARS IN CONCRETE
… provide a more efficient anchorage mechanism and limit congestion of the reinforcement. This study is part of a comprehensive study of the anchorage behavior of the headed bars. The work described in this report includes tests of 32 No. 8 headed bars anchored in simulated column-foundation …
-
The Effect of Splice Length and Distance between Lapped Reinforcing Bars in Concrete Block Specimens
… reinforcing bars with varying transverse spacing and lap splice length was evaluated in full-scale concrete block wall splice specimens. The range of the transverse spacing between bars was limited to that which allowed the bars to remain within the same cell, and included the evaluation of tied …