Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 137 for “"boundary layer separation"”.
-
Boundary layer separation and thermal choking
This thesis describes an experimental investigation of two different but related topics in high speed gasdynamics, and therefore has been divided in to two parts.
-
Laminar boundary layer separation in oscillating flow.
Laminar boundary layer separation phenomena in oscillating flow was experimentally investigated. Multiple hotwire anemometers were used to obtain instantaneous boundary layer velocity profiles on a model in an oscillating freestream. Certain instantaneous profile behavior was found to be uniquely …
-
Turbulent boundary layer separation and its driving factors
Submission original under an indefinite embargo labeled 'Open Access'. The submission was exported from vireo on 2025-03-28 without embargo terms
-
Streaming effect of wall oscillation on boundary layer separation
<p>The response of boundary layer separation from smooth surface to a periodic vortical excitation imposed locally near the separation point is studied. The emphasis is on the time-averaged streaming effect of the unsteady excitation to the separating flow. The problem is formulated as a small …
-
Boundary Layer Separation Control on a Salient Back-facing Ramp
… devices on a salient edge where the laminar boundary layer separation is two-dimensional. Three geometries of serrations: a sharp delta, a double delta and a divergent delta are examined on 15° and 30° deflected, backward-facing ramps. Parameterizing the device spacing and the …
-
Particle image velocimetry study of shock-induced turbulent boundary layer separation
… the characteristics of a Mach 2 shock wave / boundary layer interaction, by using particle image velocimetry (PIV). The objective was to investigate how the global flow structure is related to the shock-foot dynamics. A major component of this work was the development of a new multi-camera, …
-
An experimental study of turbulent boundary-layer separation with upstream disturbance
… are presented of an investigation of turbulent boundary-layer separation on the obstructions (flow over rearward-facing steps and circular cylinder models) and ramps of different angles. The experiments were carried out in The University of Tennessee Space Institute Transonic Wind Tunnel at Mach …
-
Turbulent boundary layer separation characteristics with blowing in an oscillating flow
… requirements to maintain an attached turbulent boundary layer in an oscillating freestream flow with an adverse pressure gradient. Boundary layer separation was visualized through the use of tufts. Freestream flow oscillation frequency was found to have an effect on the flowing required to …
-
Prediction and delay of 2D-laminar boundary layer separation near leading edges.
Boundary-layer flows near leading edges of generally curved obstacles have been studied for a long time. Apart from having many practical applications, the theory and approaches prevailing in this area stimulate development of a variety of computational tools and form a ground for testing them. The …
-
Turbulent Boundary Layer Separation From Smooth-Convex Surfaces in Supersonic Two-Dimensional Flow
Made available in DSpace on 2014-12-09T17:13:30Z (GMT). No. of bitstreams: 1 6406179.pdf: 3432564 bytes, checksum: 27bb187614c4b5b067de4e7bf2c82811 (MD5) Previous issue date: 1963
-
Investigation of Synthetic Jet Flow Control Parameters for the Mitigation of Laminar Boundary Layer Separation
… of forcing parameters on the mitigation of boundary layer separation on an airfoil at low Reynolds number. Post- stall flow at a Reynolds number of 100,000 and angle-of-attack 12 degrees on a NACA 0025 airfoil served as the baseline for control with a synthetic jet actuator. This baseline …
-
Numerical Investigation of the Role of Free-Stream Turbulence on Boundary-Layer Separation and Separation Control
… number conditions is impaired by laminar separation. Understanding of the physical mechanisms and hydrodynamic instabilities that are associated with laminar separation and the formation of laminar separation bubbles (LSBs) is key for the design and development of effective and efficient …
-
The effects of upstream mass injection by vortex generator jets on shock-induced turbulent boundary layer separation
… jets (VGJs), on the shock wave/turbulent boundary layer interaction (SWTBLI) generated by cylinder in a Mach 2 flow. The objectives of the study were: (i) to characterize the changes to the global structure of the flowfield introduced by the VGJs, and (ii) to study how the injection …
-
An experimental investigation of the use of air jet vortex generators to control shock induced boundary layer separation
… their effectiveness in delaying shock induced boundary layer separation was not as good as conventional vane type generators. Recent low speed wind tunnel tests carried out at City University indicated that the strength of the vortex could be increased considerably by using rectangular jet …
-
Vortex detection through pressure measurements
Vortex Generators (VGs) are known to hinder boundary layer separation, a frequently unwanted phenomenon when it comes to external flows over aircraft wings, on-ground vehicles or internal flows within pipes, diffusers and turbomachinery. Boundary layer separation leads to loss of lift, higher drag …
-
A numerical method for the calculation of unsteady lifting potential flow problems
… two-dimensional airfoils in unsteady motion with boundary layer separation is described. The airfoil and wake surfaces are represented by a finite set of uniform strength doublet panels. The doublet strengths on the airfoil surface are determined by applying a kinematic surface tangency condition …
-
A numerical model for two-dimensional unsteady flow calculations with a surface panel method
… two-dimensional airfoils in unsteady motion with boundary layer separation is described. The airfoil and wake surfaces are represented by a finite set of combined source and vortex panels. The source strengths are prescribed to have the same magnitude as the normal relative velocity on the surface …
-
Factors influencing the switching of supersonic gas jets
The phenomenon of boundary layer separation is used to advantage in the operation of a high pressure, bistable, fluid switch. It has been shown that jets of air expanded through a non-adapted, convergent-divergent, two-dimensional duct at pressure ratios in excess of critical, can be encouraged to …
-
Numerical Study of Two-Dimensional Secondary Injection Into a Mach 3.5 Freestream
… these results. Analysis using the symmetry boundary condition is compared to the full boundary condition for the constant area duct. Numerical analysis of the Mach 3.5 freestream is conducted using normal sonic injection of nitrogen gas to create the upstream interaction. Comparisons, where …
Page 1 of 7