Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 25 for “"boundary layer suction"”.

  1. Application of boundary layer suction on the vertical fin of a sailplane

    … the flow region where both laminar and turbulent boundary layers are present on the surfaces. In order to reduce drag, longer laminar flow regions must be established. Boundary layer control in the form of suction is a potential method to increase performance and is thus investigated. Boundary …

    nwu-za Repository record for Application of boundary layer suction on the vertical fin of a sailplane (opens in a new tab)

  2. Determining the effect of endwall boundary layer suction in a large scale subsonic compressor cascade

    An arrangement of suction slots was installed in the Naval Postgraduate School's subsonic cascade wind tunnel. The aim was to improve flow two-dimensionality to enable flow separation of the installed controlled- diffusion blades at high incidence. The slots were located 17.25 inches upstream of …

    nps Repository record for Determining the effect of endwall boundary layer suction in a large scale subsonic compressor cascade (opens in a new tab)

  3. Effects of Flow Control on the Aerodynamics of a Tandem Inlet Guide Vane

    … to assess the effectiveness of combined boundary layer suction and trailing edge blowing at reducing the blade profile losses and the wake momentum deficit of a cascade of tandem IGV's operating at realistic flow conditions. Two trailing edge blowing designs were tested: metal-angle …

    vt Repository record for Effects of Flow Control on the Aerodynamics of a Tandem Inlet Guide Vane (opens in a new tab)

  4. Aerodynamic Performance of a Flow Controlled Compressor Stator Using an Imbedded Ejector Pump

    … control design was developed and tested. Both boundary layer suction and trailing edge blowing developed from a single supplied motive pressure source are employed on the stator. Massflow removed through boundary layer suction is added to the motive massflow, and the resulting combined flow is …

    vt Repository record for Aerodynamic Performance of a Flow Controlled Compressor Stator Using an Imbedded Ejector Pump (opens in a new tab)

  5. Analysis of gas flow in a centrifuge

    … partial differential equation with Ekman boundary layer suction describing linearized flow in a gas centrifuge has been rederived from the linearized compressible Navier-Stokes equations by asymptotic methods. A Galerkin weak formulation is detailed for two-dimensional flow with internal …

    utk-theses Repository record for Analysis of gas flow in a centrifuge (opens in a new tab)

  6. Computations of Laminar Flow Control on Swept Wings as a Companion to Flight Test Research

    … costs while increasing range and performance. Boundary-layer suction has proven to be an effective means of achieving laminar flow over an aircraft wing as demonstrated with the Northrop X-21 program; however, even with the savings in fuel, the high manufacturing and maintenance costs have …

    tamu Repository record for Computations of Laminar Flow Control on Swept Wings as a Companion to Flight Test Research (opens in a new tab)

  7. Experimental investigation of boundary-layer control by tangential injection

    An experimental study of boundary-layer control by tangential injection in a two-dimensional flow is described and data representing eighteen different flows are presented. The data includes a variety of velocity profile types measured on plane and strongly curved surfaces in the presence of a …

    carleton Repository record for Experimental investigation of boundary-layer control by tangential injection (opens in a new tab)

  8. Active flow control in an advanced serpentine jet engine inlet duct

    … were installed to deliver varying degrees of boundary layer suction, suction and steady fluid injection, and suction and oscillatory injection. Testing showed that suction alone could delay flow separation and improve the pressure recovery of the duct by as much as 70%. However, this technique …

    tamu Repository record for Active flow control in an advanced serpentine jet engine inlet duct (opens in a new tab)

  9. Experimental Investigation of Suction Slot Geometry on a Goldschmied Propulsor

    The Goldschmied Propulsor concept combines boundary layer suction and boundary layer ingestion to improve propulsive efficiency and reduce drag on an axisymmetric body. This investigation of a Goldschmied Propulsor aimed to determine influential characteristics of the suction slot geometry to aid …

    calpoly Repository record for Experimental Investigation of Suction Slot Geometry on a Goldschmied Propulsor (opens in a new tab)

  10. On transonic wind tunnel design considerations

    … close to the actual flight case. The developed boundary-layer thickness is in the order of one inch. This permits us to probe the shear-layer in detail and thus it can yield a very informative data concerning the viscous flow at the transonic speed.</p><p>The specific modification of the …

    ut-knoxville Repository record for On transonic wind tunnel design considerations (opens in a new tab)

  11. Analysis of a Goldschmied Propulsor Using Computational Fluid Dynamics Referencing California Polytechnic's Goldschmied Propulsor Testing

    … by Fabio Goldschmied. The concept combines boundary layer suction and boundary layer ingestion technologies to reduce drag and increase propulsor efficiency. The most recent testing, done in 1982, left questions concerning the validity of the results. To answer these questions a 38.5in …

    calpoly Repository record for Analysis of a Goldschmied Propulsor Using Computational Fluid Dynamics Referencing California Polytechnic's Goldschmied Propulsor Testing (opens in a new tab)

  12. Boundary Layer Control and Wall-Pressure Fluctuations in a Serpentine Inlet

    In this thesis, the benefits of boundary layer control (BLC) in improving aerodynamic performance and engine stability were examined in a compact, serpentine inlet exhibiting flow separation. A 1/14-scale turbofan engine simulator provided the flow through the inlet. The inlet's mass flow was …

    vt Repository record for Boundary Layer Control and Wall-Pressure Fluctuations in a Serpentine Inlet (opens in a new tab)

  13. Investigation of methods of delaying or controlling ventilation on surface piercing struts

    … field. These include separation control by boundary layer suction and blowing, air bleed, solid and liquid fences, flaps, and controlled ventilated cavities. Observed differences between model and prototype behaviour is the basis of a discussion of modelling ventilation phenomena. Most …

    whiterose Download PDF for Investigation of methods of delaying or controlling ventilation on surface piercing struts (opens in a new tab)

  14. Experiments on the stability of the flat-plate boundary layer with suction

    The effects of boundary-layer suction in stabilizing the laminar boundary layer were considered in this experimental work. The experiments were conducted on a flat-plate wind-tunnel model in the V.P.I. & S.U. Stability Tunnel. The capabilities of the wind tunnel in terms of mean flow uniformity and …

    vt Repository record for Experiments on the stability of the flat-plate boundary layer with suction (opens in a new tab)

  15. Effect of Rod Gap Spacing on a Suction Panel for Laminar Flow and Noise Control in Supersonic Wind Tunnels

    … of aerodynamic noise from the turbulent boundary layer on the nozzle walls. This noise level has been shown to have an important effect on boundary layer transition measured on models in tunnels. The purpose of this thesis is to present results of a coordinated experimental and …

    odu Repository record for Effect of Rod Gap Spacing on a Suction Panel for Laminar Flow and Noise Control in Supersonic Wind Tunnels (opens in a new tab)

  16. Particle Motion in Flows: Contributions to Airborne Aerosol Measurement

    … generation of additional turbulence. It uses boundary layer suction through a porous diffuser to remove a substantial amount of air that is responsible for turbulence generation and particle loss in deposition to the inlet walls. Reduction of turbulence makes it possible to model and solve the …

    denver Repository record for Particle Motion in Flows: Contributions to Airborne Aerosol Measurement (opens in a new tab)

  17. Aerodynamic investigations of a bus under high side wind conditions conditions

    … tunnel setup did not include rotating wheels and boundary layer suction. Visualization of the airflow around the bus was achieved by using tufts, smoke and thermal camera. A steady state incompressible RANS equations(Reynolds Averaged Navier Stokes) are numerically solved in StarCCM+ to determine …

    chalmers Repository record for Aerodynamic investigations of a bus under high side wind conditions conditions (opens in a new tab)

Page 1 of 2