Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 10 of 10 for “"bracing configurations"”.
-
Analysis of Anchors and Bracing Configurations for Personal Fall Arrest Systems in Residential Construction
… truss roof system with various anchor points and bracing configurations loaded by a horizontal force. A lab built roof system was used to test three different anchor types with three forms of temporary bracing. The materials and methodology used in this testing were based on common materials and …
-
Seismically Induced Column Buckling in Special Concentrically Braced Frames in Steel Buildings
… in Seattle, WA with varying building heights and bracing configurations. Bracing configurations include chevron, multi-story-X, and paired single diagonal (V and inverted-V). Nonlinear models were developed in OpenSees and the SCBFs were subjected to suites of ground motions scaled to hazard …
-
Seismic design study of concentrically braced frames with and without buckling-controlled braces
… braces. V-type, inverted V-type, and two-story X-bracing are three major categories of SCBF bracing configurations. According to the current design approach implemented in AISC 341-10, beams and columns in SCBFs shall be designed based on the capacity of the braces to keep the beams and columns in …
-
Effect of beam strength on seismic performance of two-story X-braced frames
… frames (TSXBFs), which are the frames having the bracing configurations V- and inverted V-braces in alternate stories creating an X-configuration over two stories have become one of the most commonly used Special Concentrically Braced Frames (SCBFs) in areas with high seismicity. The primary …
-
Lateral Movement of Unbraced Wood Composite I-Joists Exposed to Dynamic Walking Loads
… of a wood composite I-joist with different bracing configurations exposed dynamic walking loads. Three 16 in. deep GPI® 65 I-joists were simply supported and laid parallel to each other, while the bracing was attached to the top flange. Five different brace stiffnesses were used: zero …
-
Estimation of Required Restraint Forces in Z-Purlin Supported, Sloped Roofs Under Gravity Loads
… panel. The proposed procedure applies to five bracing configurations: support, third-point, midspan, quarter point, and third-point plus support restraints.
-
Field Evaluation of a Modular Press-Brake-Formed Steel Tub Girder in an Application that Includes Skew and Superelevation
… includes an initial qualitative examination of bracing configurations for non-composite press-brake-formed tub girders. The results provide the basis for extending the work towards a closer investigation to determine the best practices of bracing.
-
Evaluation of steel I-section beam and beam-column bracing requirements by test simulation
… provisions provide limited guidance on the bracing requirements for beam-columns. In cases involving point (nodal) or shear panel (relative) lateral bracing only, these provisions simply sum the corresponding strength and stiffness requirements for column and beam bracing. Based on prior …
-
Seismic performance evaluation of concentrically braced and fiction damped braced frames through full-scale testing
… frame retrofitted with friction-damped bracing (FDBF). The CBF was designed according to the ductile braced frame requirements of the Canadian steel building standard CAN/CSA-S16.1-M89 (S16.1) and the National Building Code of Canada 1990. The optimum slip load for the friction dampers …
-
In-Plane Shear Stiffness of Stay-In-Place Forms and Bracing Effects on the Torsional Stability of Press-Brake-Formed Tub Girders
… tub girders have welded internal angle bracing that is believed to be necessary for torsional stability under eccentric loading. However, this bracing creates fatigue weld hotspots overtime, which are subject to cracking. This study was performed to assess the torsional behavior of the …