Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 41 for “"bracings"”.
-
Stability and dynamic behaviour of steel structures with non-linear restraints
… or multistorey frames stiffened by curved bracings, were studied under the effects of combined vertical and horizontal load systems. The study was divided into two main parts. In part one, the study examined the structural frameworks in the following situations: i) Influence of initial …
-
Bracing of steel bridges during construction; theory, full-scale tests and simulations
… in beams having unequally spaced lateral bracings. The effects of this sort are often neglected in practice and the buckling length of compression members in such systems is commonly assumed to be equal to the largest distance between the bracing points. However, the present study showed …
-
STATIC AND DYNAMIC ANALYSIS OF HIGH-RISE BUILDINGS
… can be composed by different vertical bracings, such as shear walls, braced frames and thin-walled open section profiles, having constant or variable geometrical properties along the height. In this way, most of the traditional structural schemes can be modelled, from moment resisting …
-
Development of buckling-controlled braced frames for seismic design of steel buildings
… so that structural damage can be limited with bracings. Thus, overall structural performance in ductile CBFs can be associated with plastic deformation capability of the bracing members. In this regard, local buckling-induced premature fracture and unsymmetrical hysteretic behavior of …
-
Mutual pounding of structures during strong earthquakes
… caused by impact, whereas the story bracings are required to reduce the excessive story shears or bending moments in the higher stories caused by pounding of the lower floors. It is observed that except for very soft soils, the proposed pounding mitigation scheme will increase the …
-
3-D finite element beam/connector model for a glulam dome cap
… compared with the dome cap models with the truss bracings. Finally, conclusions and recommendations for future research are presented.
-
Design of ocean platforms against ringing response
… we consider platforms with and without leg bracings. They are simplified as a beam clamped at one end and has a point mass at the other end. The leg bracings are modeled as a discrete spring. The beam is modeled as an Euler-Bernoulli beam. The fluid force is modeled using Morison's equation, …
-
Analysis of radio communication towers subjected to wind, ice and seismic loadings
… evaluated using a parametric study. The diagonal bracings controlled the capacity of the towers under wind and ice loading, whereas the guys were the most sensitive to deterioration under seismic loads. The results of this project indicate that some components of the towers are critical and could …
-
Modeling and stability investigation of a Glulam dome
… a basis for the modeling of flexible joints and bracings. Then, the 3-D, 3-noded, curved, isoparametric beam element in the first model is replaced by a 3D, 2-noded, straight beam element for the second model. Purlins consist of truss elements. Flexible joints are modeled by adding connector …
-
Flexural Behavior of Cold-Formed and Hot-Rolled Steel Sheet Piling Subjected to Simulated Soil Pressure
… effect of different transverse stresses. Lateral bracings were provided at discrete locations to establish a sheet piling wall behavior and allow the development of transverse stresses. Load-pressure, load-deflection, load-strain, and moment-deflection responses were plotted to demonstrate the …
-
Experimental Results of Moment-Rotation Characteristics of Double-Angle Gusset Plate Connections
… Web and chord members of trusses, towers and bracings in large building structures are generally achieved by using double angles back-to-back and connected to the main framing via gusset plates. Such members are typically designed as pin ended, axially loaded, compression members. As the …
-
Seismic Retrofit of Squat Reinforced Concrete Shear Walls Using Shape Memory Alloys
… due mainly to the clamping action of the SMA bracings while recovering their original length. The walls were numerically simulated with the nonlinear finite element program VecTor2. The numerical simulations accurately captured the hysteretic response of both the original and the retrofitted …
-
Optimal Bracing Type and Layouts to Minimize Lateral Drift in High-Rise Steel Framed Buildings Subjected to High Winds Using SAP2000
… and single-diagonal bracing. These types of bracings are modeled in two-dimensions in a number of different layouts along the elevation of the structure to determine the most effective means of reducing drift. The building looked at is a high-rise building in Phoenix, Arizona. The height of …
-
Analytical study on upgrading the seismic performance of nominally ductile RC frame structures using different rehabilitation techniques
… bracing, (3) using diagonal FRP strips (FRP bracings) in case of masonry-infilled frames, and (4) wrapping or partially wrapping the frame members (columns and beams) using FRP confinement. The seismic performance enhancement of the studied frames is evaluated in terms of the maximum applied …
-
Analysis of Stiffened Tall Building Structures
… shear walls and cores stiffened by outrigger bracings. The discrete matrix approach is used to investigate the effects due to different degrees of base flexibility on the optimum locations of outriggers to minimise top drift and core moment. Investigations are carried out into the static …
-
Seismic Assessment and Rehabilitation of existing RC Buildings not designed to withstand earthquakes
… of concentric steel bracing and eccentric steel bracings with dissipative shear links is illustrated and employed to retrofit the original structure. A detailed model of the retrofitting components is implemented within the detailed model for the original building. The results of numerical …
-
Improved Column Design on a DP3 Semi-Submersible Unit
… enables the catering for two horizontal cross bracings, transverse between the columns. The amount of compartments in need of regular personnel access was decreased which resulted in less watertight closures and dedicated supply ducts, thus reducing the inner column complexity. The new column …
-
Fracture risk of braces in ductile concentrically braced frames
… and partial or complete separation of bracings made of square HSS. The fracturing process concept is consistent with the fracture observed during experimental tests, and it provides a much-improved tool for numerical simulations of the post-fracture response of CBFs. Further, using the …
-
Impact of friction dampers and ductility factor on the seismic response of concrete moment resisting frame buildings
… the inline friction dampers used in diagonal bracings to control the vibration in buildings. There is no standard design process available in the National Building Code of Canada to design buildings with friction dampers. The procedure suggested in FEMA guidelines is quite complicated to use. …
-
Seismic vulnerability assessment of reinforced concrete buildings. Analysis of primary schools’ buildings of the southwestern Iberian Peninsula
… impact. The results showed that the steel X-bracings and the single braces retrofitting strategies were the most profitable. In addition, due to the lack of guidance in the seismic codes, a procedure to assess the ductility of existing Spanish buildings has been presented. The analyses …
Page 1 of 3