Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 31 for “"brake torque"”.

  1. Electric Vehicle Blended Braking maximizing energy recovery while maintaining vehicle stability and maneuverability.

    … ‘Electric Vehicle Blended Braking’. A blended brake control merges a regenerative brake system with a friction brake system. The aim is to get a better understanding regarding to what extent a regenerative brake system is capable of recovering energy and how it will affect vehicle stability and …

    chalmers Repository record for Electric Vehicle Blended Braking maximizing energy recovery while maintaining vehicle stability and maneuverability. (opens in a new tab)

  2. Optimization-based biomechanical evaluation of isometric exertions on a brake wheel

    … is the setting and releasing of railcar hand brakes. A static three-dimensional low-back biomechanical model was developed to estimate the levels of compressive force on the L3/L4 spinal joint that existed in subjects during an experiment that simulated the hand brake setting task. We recorded …

    vt Repository record for Optimization-based biomechanical evaluation of isometric exertions on a brake wheel (opens in a new tab)

  3. Research and development toward an ethanol-natural gas bi-fuel spark-ignited engine

    … manifold pressure than NG, and the maximum brake torque timing at rated speed and 25% load corresponds to a CA50 of approximately 11° after top dead center. A NG GT-Power model of the Cat CG137-8 provided by Caterpillar Inc. is retrofitted with ethanol capabilities to validate experimental …

    colostate Repository record for Research and development toward an ethanol-natural gas bi-fuel spark-ignited engine (opens in a new tab) Embargoed until 2027-01-07

  4. Test Vehicle for Regenerative Braking Emulation

    … stability and the driver‟s perception of the brake system. The impact of the human factor imposes the use of a test vehicle during development of regen braking strategies. The production of a regen braking test vehicle was initiated by SAAB as part of their Hybrid Vehicles and eAWD project and …

    chalmers Repository record for Test Vehicle for Regenerative Braking Emulation (opens in a new tab)

  5. Online Monitoring Of Brake Capability for Heavy Vehicles

    The recent advancement in heavy vehicle brakes involves development of a novel fastacting electronic brake system. This brake system comprises a slip controller that aids in reducing the stopping distances and tracks longitudinal wheel slip demands accurately during extreme braking manoeuvres. The …

    chalmers Repository record for Online Monitoring Of Brake Capability for Heavy Vehicles (opens in a new tab)

  6. Combustion and emissions of a direct injection gasoline engine using EGR

    … behaviour depending on the knock limited maximum brake torque (KLMBT) spark advance achieved. When comparing EGR types, cooled EGR achieved the best fuel consumption and cooled EGR after three-way catalyst (TWC) achieved the best gaseous emissions (NOx and HC). Swirl and tumble intake airflows …

    birmingham Download PDF for Combustion and emissions of a direct injection gasoline engine using EGR (opens in a new tab)

  7. Use of a thermodynamic cycle simulation to determine the difference between a propane-fuelled engine and an iso-octane-fuelled engine

    … selected for the analysis. Variations in the brake specific fuel consumption, brake specific NOx emissions, and mean exhaust temperature were determined for both the propane-fuelled and the iso-octane-fuelled engines. Brake specific fuel consumption and mean exhaust temperature values for the …

    tamu Repository record for Use of a thermodynamic cycle simulation to determine the difference between a propane-fuelled engine and an iso-octane-fuelled engine (opens in a new tab)

  8. Diagnostics Using Machine Learning for Air Brakes in Commercial Vehicles

    … level of autonomy to trucks, the health of their brake systems needs to be monitored continuously. Out-of-adjustment push rods and leakages in the air brake system are two major reasons for increased braking distances in trucks, and result in safety violations. Air leakages can occur due to small …

    tamu Repository record for Diagnostics Using Machine Learning for Air Brakes in Commercial Vehicles (opens in a new tab)

  9. Experiment and Simulation of the Acoustic Signature of Fatigued-Cracked Gears in a Two-Stage Gearbox

    … bearings, gear contact forces, input motor torque, output brake torque, and realistic gearbox imbalance. The gear contact force of each gear stage and the input bearing translational acceleration were the main outputs compared between a healthy gearbox and damaged gearbox computer model. The …

    calpoly Repository record for Experiment and Simulation of the Acoustic Signature of Fatigued-Cracked Gears in a Two-Stage Gearbox (opens in a new tab)

  10. Impact of low carbon fuel and catalyst on gasoline direct injection engine particulate matter

    … on PM with different stoichiometry at maximum brake torque condition. Results suggest rich combustions PM has similar characteristics to stoichiometric. Contrarily, PM was formed differently with lean combustion by showing about 30^oC earlier for the start of oxidation temperature (SOT) and …

    birmingham Download PDF for Impact of low carbon fuel and catalyst on gasoline direct injection engine particulate matter (opens in a new tab)

  11. Electrified semitrailer longitudinal wheel-torque control within safe operation and how the communication between vehicle units affects the motion performance

    … standard, which mainly allows for only brake-torque requests from the tractor to the trailer (called type 3 communication in this thesis). This will be compared to a new communication interface that allows more request signals from the tractor to the semitrailer and more data in both …

    chalmers Repository record for Electrified semitrailer longitudinal wheel-torque control within safe operation and how the communication between vehicle units affects the motion performance (opens in a new tab)

  12. Towards the Active Suppression of Disc Brake Squeal

    This work is concerned with disc brake squeal that is widely accepted as a friction-induced self-excited vibration of the brake assembly. The present thesis aims to investigate the possibility of active disc brake squeal suppression using a method of varying the leading and trailing piston …

    whiterose Download PDF for Towards the Active Suppression of Disc Brake Squeal (opens in a new tab)

  13. Rotary nonresonant energy harvesting

    … an electrical peak power of 120mW when a brake torque of 70mNm is applied on the shaft. An electrical management system is conditioning the electrical power for an attached microcontroller system counting half revolutions and writing this counter-value subsequently into a non-volatile …

    freiburg-diss Repository record for Rotary nonresonant energy harvesting (opens in a new tab)

  14. Power, Efficiency, and Emissions Optimization of a Single Cylinder Direct-Injected Diesel Engine for Testing of Alternative Fuels through Heat Release Modeling

    … proper injection timings to trigger the Maximum Brake Torque condition at a given engine speed as a function of engine load, with the goal of accelerating future calibration of the improved test cell. These timings are also compared to the emissions profile of the engine, with the goal of linking …

    ku Repository record for Power, Efficiency, and Emissions Optimization of a Single Cylinder Direct-Injected Diesel Engine for Testing of Alternative Fuels through Heat Release Modeling (opens in a new tab)

  15. Characterisation of coated lightweight brake rotors

    … studies were undertaken using lightweight brake rotors to reduce vehicle weight and thereby improve fuel efficiency and vehicle emissions. Abaqus finite element and Matlab software were used to construct one dimensional (1D), two dimensional (2D) and three dimensional (3D) thermal models to …

    whiterose Download PDF for Characterisation of coated lightweight brake rotors (opens in a new tab)

  16. Experimental Design, Testing, and Evaluation of Methods to Improve the Efficiency and Reduce Emissions from a Small Two-stroke Natural Gas Engine

    … timing and ignition timing set for maximum brake torque (MBT). Two different fueling strategies and two variations in resonant exhaust systems were examined. The engine was first tested with port injection (PI) of NG with a near optimum baseline exhaust, then using low pressure direct …

    wvu Repository record for Experimental Design, Testing, and Evaluation of Methods to Improve the Efficiency and Reduce Emissions from a Small Two-stroke Natural Gas Engine (opens in a new tab)

  17. Machine Learning-based Prediction of Heavy-Duty Diesel Engine Emissions and Comparative Analysis against Statistical Models

    … key engine inputs including the engine speed, brake torque, intake air flow, and the fuel flow rate. The target outputs include critical emissions parameters such as nitrogen oxides (NOx) concentration, along with additional performance indicators. Two statistical models – the Multiple Linear …

    wvu Repository record for Machine Learning-based Prediction of Heavy-Duty Diesel Engine Emissions and Comparative Analysis against Statistical Models (opens in a new tab)

  18. Mean value modeling and control of a diesel engine using neural networks

    … and combustion efficiency through engine brake torque predictions. The mean value model was coupled with several sub-models to predict exhaust gaseous and particulate emissions and satisfactory predictions were reported over highly transient engine test schedules.;The mean value model was …

    wvu Repository record for Mean value modeling and control of a diesel engine using neural networks (opens in a new tab)

Page 1 of 2