Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 1094 for “"braking"”.
-
Dynamic Braking Control for Accurate Train Braking Distance Estimation under Different Operating Conditions
… Adaptive Control (MRAC) for train dynamic braking is investigated in order to control dynamic braking forces while remaining within the allowable adhesion and coupler forces. This control method can accurately determine the train braking distance. One of the critical factors in Positive …
-
The dynamic braking of induction motors.
The dynamic braking of induction motors is investigated with particular emphasis on the use o-f zero-sequence connections. The braking performance using both AC and DC supplies is compared. A mathematical model is developed to predict both the transient and steady-state zero-sequence braking …
-
An Experimental Investigation of Proportional Braking
… safety has become more and more important.The braking device contributes largely to the problem of safe driving.
-
Development of servo-controlled braking system
… A test rig was constructed to measure the braking capabilities of the servo. The results showed that the servo was strong enough to withstand the weights used during testing and the configuration of the processor unit used to control the servo. Future plans for the car include an …
-
Test Vehicle for Regenerative Braking Emulation
… purposes, which is known as regenerative (regen) braking. However, regen braking also influences the vehicle stability and the driver‟s perception of the brake system. The impact of the human factor imposes the use of a test vehicle during development of regen braking strategies. The production of …
-
Braking Availability Tester (BAT) for Winter Runway
… device for the realistic assessment of braking capability of landing airplanes for winter runways. Landing represents one of the most safety-critical phases of aircraft operation. Aircraft runway excursion incidents occur due to the unpredictability of the runway pavement condition. This …
-
Adapting Regenerative Braking Strength to Driver Preference
… vehicles, the implementation of regenerative braking systems, specifically lift-off regenerative braking, has become a focal point. However, research indicates that drivers often find the predefined deceleration response during lift-off regenerative braking to be undesirable. This thesis …
-
Hybrid electric vehicle regenerative-braking using ultracapacitors
… for electric load leveling and regenerative braking is presented. Proposed sizing of an ultracapacitor system is presented and discussed based on the available energy and the nominal operating voltage from a hybrid electric vehicle transit bus; A control scheme is required to effectively …
-
Tire Models for Use in Braking Applications
… and the ground is the limiting factor for a safe braking. To get optimal performance it is important that the system can utilize all friction resources. The brush tire model was a popular method in the 1960's and 1970's before the empirical approaches became dominating. The brush model gives an …
-
Adaptive and Robust Braking-Traction Control Systems
The designs of commercial Anti-Lock Braking Systems often rely on assumptions of a torsionally rigid tire-wheel system and heavily rely on hub-mounted wheel speed sensors to manage tire-road slip conditions. However, advancements in high-bandwidth braking systems, in-wheel motors, variations in …
-
Analysis of regenerative braking in electric machines
… have two mechanical operations, motoring and braking. The nature of braking can be regenerative, where the kinetic energy of the rotor is converted into electricity and sent back to the power source or non-regenerative, where the source supplies electric power to provide braking. This thesis …
-
The Quickness of Selected Automobile Braking Methods
Made available in DSpace on 2014-12-10T18:06:44Z (GMT). No. of bitstreams: 1 6604139.pdf: 3791980 bytes, checksum: c14b7bc710ccb559b05e75c183a1827a (MD5) Previous issue date: 1965
-
A study of rolling adhesion in braking
… time on the coefficient of adhesion at slip in braking was investigated. A test rig that simulated locomotive wheel/rail interactions was used for the experimentation. The results indicated a drop in the coefficient of adhesion with increasing speed. However, normal load, contact velocity, and …
Page 1 of 55