Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 90 for “"brazed"”.
-
MICROSTRUCTURE AND PROPERTIES OF BRAZED COMPOSITE COATINGS
… through brazing. Four different coatings were brazed at Tmax of 1070, 1085, 1100 and 1130 °C;. these are called 1070 coating, 1085 coating, 1100 coating and 1130 coating. In all the coatings, the major intermetallic compounds: chromium boride, nickel boride, and nickel silicide solidify …
-
THE STRENGTH OF BRAZED SINGLE-LAP JOINTS
… high operating-temperature topologically-complex brazed structures, like plate-fin heat exchangers, from low-cost stamped sheet steel which would be impossible to produce by traditional manufacturing techniques—except for metal 3D printing which is extremely slow and expensive. Specifically, …
-
Flow distribution in brazed plate heat exchangers
Brazed plate heat exchangers (BPHEs) have been widely used in the heating, ventilating, air conditioning, and refrigeration (HVAC&R) industry for their compactness and high heat transfer coefficient. However, they suffer from the flow maldistribution among parallel plate channels. Especially when …
-
MECHANICAL PROPERTIES OF NICKEL BASE WIDE GAP BRAZED JOINT
… tensile properties of nickel base wide gap brazed joints have been investigated using IN625 as the base metal and Nicrobraz LC and Nicrogap 16 as the filler metal and gap filler, respectively. Three different gap widths were studied, i.e., 0.4, 0.8 and 1.2mm. The gaps were first prepacked …
-
Failure Analysis of Brazed Joints Using the CZM Approach
… of a structure. Structural reliability of a brazed assembly is strongly dependent on the joint mechanical properties. In the present work, mechanical reliability of low carbon steel brazed joints with copper filler metal is investigated and a methodology for failure analysis of brazed joints …
-
The formation of brittle phases in brazed zirconium joints
… that would aid in the production of tougher brazed zirconium joints than are currently being obtained. The investigation was carried out in a number of stages: 1. A general literature survey of the metallurgy of brazed joints. 2. Zirconium brazed lap joints were made using either vacuum …
-
A study of the residual stresses in dissimilar material brazed joints
… the design or failure of dissimilar material brazed joints there must be an understanding of the metallurgy and mechanics of the joint. There must also be an understanding of how residual stresses develop due to the joining process. The work presented in this thesis aims to develop this …
-
Estimation of Thermal and Hydraulic Characteristics of Compact Brazed Plate Heat Exchangers
… performance estimation methods of compact brazed plate heat exchangers (BPHE) operating in single phase, condenser, evaporator, cascaded and transcritical applications. Such methods play a vital role in development of heat exchanger selection software and during geometry parameter …
-
INVESTIGATION OF MECHANICAL PERFORMANCE AND FORMABILITY OF WELDED AND BRAZED SHEET MATERIALS
… and impact behavior. In particular, welded and brazed sheet materials in the form of tailor blanks (TBs) are being increasingly used or considered for future applications in different applications such as automotive, aerospace and marine constructions as they offer attractive combination of …
-
Application of Machine Learning in Failure Prediction of Brazed-Aluminum Based Heat Exchangers
Brazed aluminum plate-fin heat exchangers (BAHX), extensively used by the natural gas liquid recovery and gas processing industry, are subject to a uniquely stressful and harsh environment that involves large thermal stresses due to steady-state and transient thermal loads, mechanical loads, …
-
FRACTURE AND FATIGUE OF STAINLESS STEEL WIDE GAP BRAZED WITH NICKEL BASED FILLER METALS
… fatigue, of AISI 316 stainless steel wide gap brazed with different nickel based filler metals have been investigated. Tensile tests with extra small strain gauges bonded at the centre of the joints were carried out. Fatigue crack initiation lives and propagation rates were evaluated under …
-
Characterisation and modification of residual stress in brazed dissimilar material joints for a future fusion divertor
… modifying the residual stress state of vacuum brazed, fusion relevant, tungsten dissimilar material joints is presented in this thesis. Tungsten-copper and tungsten-316L stainless steel parts were successfully brazed using a eutectic gold-copper brazing alloy. A total of 30 dissimilar material …
-
Performance Analysis of a Transcritical CO2 Heat Pump Water Heater Incorporating a Brazed-Plate Gas-cooler
… buoyancy driven thermosyphon flow through a brazed-plate gas-cooler was proposed to promote tank stratification and to improve system performance. The performance was evaluated through a series of experimental sensitivity and static tank charge tests. A TRNSYS model was also created and …
-
Experimental study of the thermal-hydraulic performance of a brazed aluminum heat exchanger under wet-surface conditions
… wet-surface conditions. The test specimen is a brazed-aluminum, louvered-fin heat exchanger. The total capacity, pressure drop and water drainage behavior under various water usage rates and air face velocities are explored and compared to data from dry-surface conditions. The impact of spray …
-
Study of the effects of external corrosion on the thermal-hydraulic performance of brazed aluminum microchannel heat exchangers
Submission published under a 24 month embargo labeled 'Closed Access', the embargo will last until 2026-12-01
-
The joining development, metallurgical study and characterisation approach of brazed joints between tungsten and fusion related materials for divertor applications
The design of brazed joints between tungsten to other fusion related materials is a significant challenge in developing fusion reactors, largely due to the dissimilar physical metallurgy of the materials to be joined. Under extreme thermal loading and plasma irradiation conditions, selecting …
-
Development of MPEA filler for dissimilar joining of steel to titanium alloy and evaluation of strength of brazed joints
In the design of lightweight structures, Ti alloy to steel joining has been given considerable attention recently. Creating a robust Ti/Steel joint by various joining techniques have proven to be difficult owing to poor metallurgical compatibility and formation of brittle intermetallic phases. …
Page 1 of 5