Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 159 for “"brazing"”.
-
Brazing of Additively Manufactured Metals
… is not capable of printing yet. Coupling AM with brazing, which uses a molten filler metal to form a joint above 450◦C, could be the solution. This PhD explores air furnace brazing, using AgCuZnSn alloys of variable flow properties, and vacuum furnace brazing, using a CuGeNi alloy in rod and foil …
-
Reactive eutectic brazing of nitinol
Thesis (Ph. D.)--Michigan State University. Materials Science and Engineering, 2009
-
Investigation of induction brazing on circular pipes: An detailed investigation of an induction brazing process
… thesis project was an investigation of induction brazing on circular pipes and a detailed investigation of an induction brazing process station. The background for the project was problems with not fulfilling quality requirements for induction brazed joints at a specific induction brazing station. …
-
WIDE GAP BRAZING WITH PRE-PACKS
… gap filler contents used varied from 0% to 100%. Brazing temperatures of 1125°C, 1150°C, 1175°C and 1200°C were used. Three gap depths: 4 mm, 6 mm and 8 mm were attempted with a gap width of 0.5 mm. Limited microstructural studies were also carried out by means of optical and scanning electron …
-
PRACTICAL ASPECTS OF WIDE-GAP BRAZING
… various practical aspects concerning wide-gap brazing of nickel-base superalloys with nickel-base fillers using the technique of pre-placing the braze filler at the mouth of the gap. All brazings were carried out in a vacuum furnace and the resultant braze joints were examined under an optical …
-
Vacuum Brazing of Carbon Nanotube Strands
… macro joining techniques. In this study, vacuum brazing technology has been developed for joining macro CNTs strands with Ni using a Ti-Ag-Cu alloy. The brazing mechanism has been confirmed as due to TiC formation at the CNTs/Ti-Ag-Cu interface. To evaluate this novel vacuum brazing technique for …
-
Laser Brazing of Magnesium to Steel Sheet
… thesis details (i) the development of a laser brazing technology for joining Mg alloy-interlayer-steel dissimilar metal combinations, (ii) thermochemical analysis of phases formed at the interface of a Mg alloy-steel joint during laser brazing, (iii) the bonding mechanisms in the Mg …
-
The Development of Novel Silver Brazing Alloys
… was primarily focussed on finding novel silver brazing alloys. The first alloy development method used to achieve this goal was a CALPHAD-based approach. This was used to predict melting temperatures and the intermetallic content of alloys. The method was developed and then applied to a commonly …
-
Process optimization of Gas Metal Arc Brazing technology
Gas-metal-arc brazing (GMAB) technology is a transformative non-fusion joining process used in the joining of thin-gauge Zn-coated advanced high strength steels (AHSSs) employed in the automotive industry. Due to its lower heat input capability, the technology offers several benefits over the …
-
Kinetics of interfacial reactions in reactive metal brazing
Includes bibliographical references (pages 174-183).
-
Development of novel Ni-based brazing filler metals
… larger scale automotive and aircraft structures. Brazing is a distinct joining technique, involving the melting of a metallic filler metal introduced in between two or more materials to be joined. While welding requires the melting of the materials being joined, brazing does not, and as such the …
-
The Design of a Magnetic Component for Induction Brazing
… teeth are fitted and brazed. The current brazing process requires heating the whole jaw in a furnace for 4 hours, an inefficient and time consuming process. Induction brazing offers a much faster, cheaper alternative that reduces electricity consumption. Through the development of a …
-
Warm Forming of Aluminum Brazing Sheet. Experiments and Numerical Simulations
… of warm forming on Novelis X926 clad aluminum brazing sheet. Warm forming of clad aluminum brazing sheet, which is commonly used in automotive heat exchangers has not been studied. This work can be split into three main goals: i) to characterize the material behavior and develop a constitutive …
-
Spreading of copper-copper oxide brazing alloys on alumina, The
Includes bibliographical references (pages 100-103).
-
High Entropy Materials as Brazing Filler Metals for Thermoelectric Devices
Brazing is a 5000 year-old joining process. Components are joined by heating them above the liquidus of a filler metal placed between them which forms a metallurgical bond as it solidifies. Brazed joints are relatively high strength and are often electrically conductive. As materials applications …
-
Development of experimental Ag-based brazing alloys for orthodontic applications
… Aim: The development of experimental Ag based brazing alloys free of Cu and Zn.Materials and Methods: Four commercially alloys were selected: Dentaurum Universal silver Soldering, Leone Orthodontic Solder, Nobil Metal Solder and Orthotechnology Silver Solder. The experimental alloys Ag12Ga, …
-
BRAZING OF SINGLE CRYSTAL NICKEL WITH NI-B-SI FILLER METAL
Brazing of single crystal nickel components and related phenomena were studied in the present work. Pure nickel single crystals and commercially available Ni-B-Si filler foil were adopted. The brazing were conducted at various temperatures under different external pressures. Brazing below the …
-
Arc brazing of austenitic stainless steel to similar and dissimilar metals.
There is a desire within both the stainless steel and automotive industries to introduce stainless steel into safety critical areas such as the crumple zone of modem cars as a replacement for low carbon mild steel. The two main reasons for this are stainless steel's corrosion resistance and its …
-
F-TEMPER VS O-TEMPER BRAZING OF 3003 ALUMINUM RETURN BENDS
As-extruded (F-temper) 3003 return bends can provide cost savings over annealed (O-temper) return bends in aluminum heat exchangers. To assess if F-temper return bends are an alternative to the baseline O-temper bends, the grain structure, bending performance, and melting behavior were assessed …
Page 1 of 8