Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 377 for “"buffer layer"”.

  1. Kinetics of Buffer-Layer-Assisted Nanostructure Growth

    … to circumvent these obstacles, the technique of buffer-layer-assisted growth (BLAG) was introduced by our research group during the 1990’s. In this technique, physical vapor deposition is done on a thin film buffer of condensed rare gas solid, where three-dimensional cluster growth is possible …

    uiuc Repository record for Kinetics of Buffer-Layer-Assisted Nanostructure Growth (opens in a new tab)

  2. TRANSPARENT ELECTRODE AND NOVEL BUFFER LAYER MATERIALS FOR ORGANIC PHOTOVOLTAICS

    … light-weight and intrinsic flexibility of active layers. In OPVs devices, the transparent electrode, which enable light to pass through and buffer layer materials, including hole and electron transporting layers, which can establish ohmic contacts between the active layer and the two electrodes …

    nus Repository record for TRANSPARENT ELECTRODE AND NOVEL BUFFER LAYER MATERIALS FOR ORGANIC PHOTOVOLTAICS (opens in a new tab) Download file for TRANSPARENT ELECTRODE AND NOVEL BUFFER LAYER MATERIALS FOR ORGANIC PHOTOVOLTAICS (opens in a new tab)

  3. MBE Growth of MgO Buffer Layer for Complex Oxide Heterostructures

    … properties of each oxide film. By using a buffer layer, it is possible to produce a desired epitaxial oxide layer on a particular substrate without damaging either the substrate or the overlayer. Magnesium oxide (MgO) is a large bandgap insulator. Having a rock salt structure, it is a good …

    mo-state Repository record for MBE Growth of MgO Buffer Layer for Complex Oxide Heterostructures (opens in a new tab)

  4. CdS/CdTe Thin Film Solar Cells With Zinc Stannate Buffer Layer

    … can be improved by integrating a ZTO buffer layer, which interdiffuses into the CdS layer during device fabrication. Reducing the thickness of CdS layer improves the QE in the blue spectral region without affecting the device performance. This buffer layer is expected to prevent the …

    usf Repository record for CdS/CdTe Thin Film Solar Cells With Zinc Stannate Buffer Layer (opens in a new tab)

  5. High Resistivity Zinc Stannate As A Buffer Layer In CdS/CdTe Solar Cells

    … 94%. Zn2SnO4 thin films are incorporated as a buffer layers into CdTe solar cells. SnO2: F is used as a front contact in CdTe solar cells in conjunction with high resistive Zn2SnO4 buffer layer. The best SnO2:F /zinc stannate cell device performance for room temperature deposited zinc stannate …

    usf Repository record for High Resistivity Zinc Stannate As A Buffer Layer In CdS/CdTe Solar Cells (opens in a new tab)

  6. Variable range hopping conduction in the epitaxial graphene buffer layer on SiC(0001)

    … transport properties of the first graphene layer grown on the (0001) of SiC, referred to as the buffer layer. It has been shown previously that the buffer layer is structurally a continuous graphene layer subject to periodic interactions with the underlying substrate. Electronically, the …

    gatech Repository record for Variable range hopping conduction in the epitaxial graphene buffer layer on SiC(0001) (opens in a new tab)

  7. Performance and metastability of CdTe solar cells with a Te back-contact buffer layer

    … This research incorporated a thin-film Te-buffer layer into the contact structure, between the CdTe and contact metal. The device performance and characteristics of many different back contact configurations were rigorously studied. CdTe solar cells fabricated with the Te-buffer contact …

    colostate Repository record for Performance and metastability of CdTe solar cells with a Te back-contact buffer layer (opens in a new tab)

  8. Epitaxial growth of Ga-polar GaN nanocolumns on Si(111) with AlN buffer layer

    Στην διπλωματική αυτή εργασία μελετάται η ανάπτυξη Ga-πολικών GaN nanocolumns με την μέθοδο επιταξίας μοριακής δέσμης. Η εργασία χωρίζεται σε δύο μέρη. Στο Μέρος I, γίνεται μία μικρή εισαγωγή στα θεωρητικά στοιχεία που είναι απαραίτητα ώστε να γίνει κατανοητή η εργασία. Περιλαμβάνει εισαγωγή στις …

    athens Repository record for Epitaxial growth of Ga-polar GaN nanocolumns on Si(111) with AlN buffer layer (opens in a new tab)

  9. Pulsed Laser Annealing to Optimize Structural Properties of GaN Buffer Layer in GaN/A1GaN HEMTS

    … related to high dislocation density during multilayer fabrication processes. Dislocations in the GaN layer can detrimentally impact the mobility of the two-dimensional electron gas (2DEG) formed at the AlGaN/GaN interface, thus affecting device performance. While extensive research has focused on …

    texas-state Repository record for Pulsed Laser Annealing to Optimize Structural Properties of GaN Buffer Layer in GaN/A1GaN HEMTS (opens in a new tab)

  10. Indium Oxide as a High Resistivity Buffer Layer for CdTe/CdS Thin Film Solar Cells

    … relatively greater than front contact) buffer layer. The device characteristics of these devices were low but improved considerably after the inclusion of an intrinsic SnO2 (SnO2-i) deposited by MOCVD as buffer. Thus having emphasized and demonstrated the benefits of a buffer layer in …

    usf Repository record for Indium Oxide as a High Resistivity Buffer Layer for CdTe/CdS Thin Film Solar Cells (opens in a new tab)

  11. A polypropylene carbonate-based adaptive buffer layer for stable interfaces of solid polymer lithium metal batteries

    … battery cycling by introducing an adaptive buffer layer (ABL) between the Li metal anode and SPE. The ABL consists of low molecular weight polypropylene carbonate (PPC), poly(ethylene oxide) (PEO) and lithium salt. Viscoelastic properties obtained by rheology experiments indicate that ABL …

    gatech Repository record for A polypropylene carbonate-based adaptive buffer layer for stable interfaces of solid polymer lithium metal batteries (opens in a new tab)

  12. Impact of Donor/Acceptor Interface and an Interfacial Buffer Layer on Performance Characteristics of Bulk Heterojunction Solar Cells: A Kinetic Monte Carlo Study

    … and use the model to study effect of interfacial buffer layer in IV characteristics of bulk heterojunction solar cell. The major physical processes such as: exciton generation/dissociation/recombination, charge hopping/recombination and charge injection/extraction mechanisms were incorporated in a …

    sdstate Repository record for Impact of Donor/Acceptor Interface and an Interfacial Buffer Layer on Performance Characteristics of Bulk Heterojunction Solar Cells: A Kinetic Monte Carlo Study (opens in a new tab)

  13. Structure and properties of incommensurate and commensurate phases of graphene on SiC(0001)

    … of graphene was discovered in the first graphene layer that grows on SiC, often called the ``buffer layer." Its semiconductor character has been attributed to functionalization through sp3 bonding to the SiC interface. As such, the buffer layer is the only known highly ordered functionalized …

    gatech Repository record for Structure and properties of incommensurate and commensurate phases of graphene on SiC(0001) (opens in a new tab)

  14. Magnetic and magneto-optical properties of cobalt/nickel multilayer thin films

    Co/Ni multilayer thin films were prepared in a magnetron sputtering system, and their structural, magnetic and magneto-optical properties were experimentally investigated. It was found that the properties of Co/Ni multilayer thin films depend strongly on buffer layer materials and buffer layer …

    nebraska Repository record for Magnetic and magneto-optical properties of cobalt/nickel multilayer thin films (opens in a new tab)

  15. Growth and Characterization of ZnO for the Front Contact of Cu(In,Ga)Se2

    ZnO window layers for CIGS solar cells are grown with a DC sputtering technique instead of a conventional RF sputtering technique. Transparent window layers and buffer layers are sputtered from the Zn target in the presence of Oxygen. The window layer is doped with Aluminum in order to achieve high …

    usf Repository record for Growth and Characterization of ZnO for the Front Contact of Cu(In,Ga)Se2 (opens in a new tab)

  16. Enhancement of EPIR Switching Characteristics of PCMO RRAM Using Oxygen Deficient Al2Ox Diffusion Barrier

    … investigated the effect of oxygen ion/vacancy buffer layer of Al2Ox in metal/buffer layer/PCMO/Metal heterostructure prepared by RF sputtering in Ar only and Ar:O2 atmosphere. The diffusion barrier of the same is integrated into Pr0.7Ca0.3MnO3 (PCMO) to study the resistance switching and …

    houston Repository record for Enhancement of EPIR Switching Characteristics of PCMO RRAM Using Oxygen Deficient Al2Ox Diffusion Barrier (opens in a new tab)

  17. TOWARDS ORGANIC SPINTRONICS: TUNING THE CARRIER INJECTION BARRIER AT THE ORGANIC/FERROMAGNET INTERFACE

    … consists of two or more conducting ferromagnetic layers with different hysteresis curves and one sandwiched nonmagnetic layer (conductor/semiconductor). The application of p-conjugated organic molecules as spin transporting layers in spin valves has attracted tremendous research interest. Due to …

    nus Repository record for TOWARDS ORGANIC SPINTRONICS: TUNING THE CARRIER INJECTION BARRIER AT THE ORGANIC/FERROMAGNET INTERFACE (opens in a new tab) Download file for TOWARDS ORGANIC SPINTRONICS: TUNING THE CARRIER INJECTION BARRIER AT THE ORGANIC/FERROMAGNET INTERFACE (opens in a new tab)

  18. MBE growth of InxGa1-xAs/GaAs/Si heterostructure system

    … we grew the In_xGa_{1-x}As/GaAs/Si (GaAs as buffer layer) by MBE technique. The surface of the buffer layer became microscopically rough as the thickness of the buffer layer increased and the growth mode of GaAs on Si underwent a change from three-dimensional to two-dimensional during the …

    njit Repository record for MBE growth of InxGa1-xAs/GaAs/Si heterostructure system (opens in a new tab)

Page 1 of 19