Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 17 of 17 for “"bulk adhesive"”.

  1. Characterization of adhesively bonded joints using bulk adhesive properties

    Though using bulk adhesive properties to predict adhesively bonded joint response has yet to be proven infallible, based upon the success of previous works, this effort attempts to shed some light on the stresses present in a typical automotive bonded joint. Adhesive material properties obtained in …

    vt Repository record for Characterization of adhesively bonded joints using bulk adhesive properties (opens in a new tab)

  2. Analysis of a bonded joint using bulk adhesive properties

    Adhesives and adhesively bonded structures are being considered as a viable alternative to conventional fastening methods. In order to gain wider acceptance, it is essential to address the issue of the mechanical characterization of adhesive materials and its implementation in the design of bonded …

    vt Repository record for Analysis of a bonded joint using bulk adhesive properties (opens in a new tab)

  3. The effect of residual thermal stresses on the viscoelastic behavior of adhesively bonded joints

    Present stress analysis of adhesively bonded joints suffers from inadequate adhesive material characterization. The lack of correlation between bulk adhesive properties and the corresponding in-situ behavior has led to numerous adhesive test geometries. The current study was an attempt to predict …

    vt Repository record for The effect of residual thermal stresses on the viscoelastic behavior of adhesively bonded joints (opens in a new tab)

  4. The Development of Gelatin Based Tissue Adhesives for Use in Soft Tissue Biomedical Applications

    … time, diffusion processes, material properties, adhesive properties, and the drying variables on the material and adhesive properties of Gelatin Resorcinol Dialdehyde (GR-DIAL) tissue adhesives by varying formulation. Three adhesive formulations with altered weight content of water and glyoxal (a …

    vt Repository record for The Development of Gelatin Based Tissue Adhesives for Use in Soft Tissue Biomedical Applications (opens in a new tab)

  5. Comparing In Situ and Bulk Constitutive Properties of a Structural Adhesive

    … quest for more efficient designs, structural adhesives are being used in place of, or with, traditional fastening methods; however designing with adhesives is refined as traditional methods. To obtain the adhesive design properties, tests are often performed on bulk tensile and bonded shear …

    vt Repository record for Comparing In Situ and Bulk Constitutive Properties of a Structural Adhesive (opens in a new tab)

  6. Nonlinear ultrasonic techniques for evaluation of contaminant based micro-scale defects in adhesive joints

    Adhesive joints are extensively used in various engineering fields, including the aerospace, automotive, and marine industries. They are an alternative to using conventional mechanical fasteners and such joins have various advantages. Firstly, adhesive joints can provide a uniform stress …

    iastate Repository record for Nonlinear ultrasonic techniques for evaluation of contaminant based micro-scale defects in adhesive joints (opens in a new tab)

  7. The creep behaviour of structural adhesive joints

    … creep behaviour under load of three structural adhesives - a phenol formaldehyde/polyvinyl formal material and two forms of epoxide adhesive - when used to bond lap joints. Lap joints were subjected to constant load in spring loaded testing rigs. Shear creep in the adhesive layer has been …

    city-london Download PDF for The creep behaviour of structural adhesive joints (opens in a new tab)

  8. Dynamic Mixed-Mode Fracture of Bonded Composite Joints for Automotive Crashworthiness

    … loading conditions. Due to the nature of the adhesive studied, a limited number of data points were obtained under mode I loading conditions. A significant increase in the number of measurable crack initiation events was observed for mixed-mode I/II loading conditions, where stick slip …

    vt Repository record for Dynamic Mixed-Mode Fracture of Bonded Composite Joints for Automotive Crashworthiness (opens in a new tab)

  9. Effect of moisture on mixed-mode TSR on a glass/epoxy interface

    The understanding of interfacial failure in adhesively bonded structures is important for several sectors including transportation and infrastructure. This problem has motivated studies for several decades. Adhesives are polymeric and, as such, present time, temperature, strain rate and moisture …

    texas Repository record for Effect of moisture on mixed-mode TSR on a glass/epoxy interface (opens in a new tab)

  10. Environmental effects on epoxy adhesive and joints

    The use of adhesive joining in mechanical structures, especially in industrial usage, is rapidly increasing. However, to be confident in their use it is essential to evaluate the performance of the joints, especially when their strength tends to decrease upon exposure to warm and humid conditions …

    poli-torino Repository record for Environmental effects on epoxy adhesive and joints (opens in a new tab)

  11. Marine applications for structural adhesives

    Modern structural adhesives are now available that are potentially suitable for the bonding of both metallic components and fibre reinforced polymer materials for structural marine applications. Pultruded grp specimens are increasingly available which together with mass produced grp panels form the …

    glasgow Repository record for Marine applications for structural adhesives (opens in a new tab) Download PDF for Marine applications for structural adhesives (opens in a new tab)

  12. Durability of Polyimide/Titanium Adhesive Bonds: An Interphase Investigation

    … the three-dimensional region surrounding the adhesive/substrate interface, becomes critically important. Frequently, failure occurs in this region after adhesively bonded systems are subjected to elevated temperature oxidative aging. In a previous study, this was found to be the case with a …

    vt Repository record for Durability of Polyimide/Titanium Adhesive Bonds: An Interphase Investigation (opens in a new tab)

  13. Σύνθεση και πειραματικός χαρακτηρισμός κόλλας βιολογικής βάσης για δομικές εφαρμογές: ενίσχυση της κόλλας με νανοσωλήνες άνθρακα

    The increasing use of epoxy adhesives in construction and cosmetic applications in different industries combined with the new restrictions on the use of mineral resources and the produced environmental footprint and the need for increased recyclability has caused great interest in the last decade …

    greece Repository record for Σύνθεση και πειραματικός χαρακτηρισμός κόλλας βιολογικής βάσης για δομικές εφαρμογές: ενίσχυση της κόλλας με νανοσωλήνες άνθρακα (opens in a new tab)

  14. An interdisciplinary study of cathodic debonding in elastomer/metal adhesive bonds

    … study concerning the durability of adhesively elastomer/metal bonded joints in marine environments is reported. The generation of OH⁻ ions at the bondline due to an imposed cathodic current from an external source is suspected to be the predominant cause of failure. A surface …

    vt Repository record for An interdisciplinary study of cathodic debonding in elastomer/metal adhesive bonds (opens in a new tab)

  15. Crack path selection and shear toughening effects due to mixed mode loading and varied surface properties in beam-like adhesively bonded joints

    Structural adhesives are widely used with great success, and yet occasional failures can occur, often resulting from improper bonding procedures or joint design, overload or other detrimental service situations, or in response to a variety of environmental challenges. In these situations, cracks …

    vt Repository record for Crack path selection and shear toughening effects due to mixed mode loading and varied surface properties in beam-like adhesively bonded joints (opens in a new tab)

  16. Epoxy Adhesives, Correlation between Strain Whitening and Damage Using a Macroscopic Optical Method

    … long-term durability performance. Epoxy-based adhesives provide an important joining method to increase structural stiffness and enable the joining of dissimilar materials for multi-material assemblies. However, the design of adhesive joints requires mechanical data to support integration in …

    waterloo Repository record for Epoxy Adhesives, Correlation between Strain Whitening and Damage Using a Macroscopic Optical Method (opens in a new tab)

  17. Evaluation of the effects of defects and ageing on the strength of composite bonded joints by mechanical tests and numerical simulation: implementation of the novel centrifuge test

    The use of adhesive bonding in aircraft structures is continuously increasing due to the numerous advantages it provides over conventional joining techniques. However, the use of adhesive bonding technology is limited to joining and patch-repairing of secondary structures that are not …

    greece Repository record for Evaluation of the effects of defects and ageing on the strength of composite bonded joints by mechanical tests and numerical simulation: implementation of the novel centrifuge test (opens in a new tab)