Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 21 for “"butt weld"”.

  1. Predicted Effects of Residual Stresses on Butt Weld Fatigue Life

    Made available in DSpace on 2014-12-14T16:00:37Z (GMT). No. of bitstreams: 1 7811214.pdf: 3487716 bytes, checksum: 0c546889a9041bc640a3abb62ae421ed (MD5) Previous issue date: 1978

    uiuc Repository record for Predicted Effects of Residual Stresses on Butt Weld Fatigue Life (opens in a new tab)

  2. Seismic Evaluation of Welded Moment-resisting Connections

    Welded moment-resisting connections are used in the rigid frames of high-rise buildings. Most of the standards specify full penetration butt welds as a suitable type of weld for welding beam flanges to the column flange in seismic areas. New Zealand’s steel design standard is the only standard that …

    auckland-ms Repository record for Seismic Evaluation of Welded Moment-resisting Connections (opens in a new tab)

  3. Dissimilar Metal Friction Stir Welding of Aluminum to Magnesium Alloys

    … aluminum (Al) to magnesium (Mg) by friction stir welding resulted in the intermetallic formation inside the stir zone under all conditions of welding. The presence of brittle and low toughness intermetallic phases results in low strength and ductility of the weld joint. The strength of 6063 Al and …

    south-carolina Repository record for Dissimilar Metal Friction Stir Welding of Aluminum to Magnesium Alloys (opens in a new tab)

  4. Reduction of residual stress and distortion in HY100 and HY130 high strength steels during welding

    … in HY100 and HY130 high strength steels during welding. Tests were also conducted on Mild Steel for comparison. The goal of these tests was to first ascertain the distortion and residual stresses during and after welding of test pieces of the three different steels. Test specimens were: 5.5' …

    nps Repository record for Reduction of residual stress and distortion in HY100 and HY130 high strength steels during welding (opens in a new tab)

  5. Corrosion Fatigue of Friction Stir Welded Magnesium Alloy AZ31B: A Comparative Study

    … conducted on base metal (BM) and friction stir welded (FSW) magnesium (Mg) alloy AZ31B compact tension (CT) specimens in laboratory air and a 0.05 wt. % NaCl fog environment in efforts to delineate the effects of salt fog and stir welding on fatigue performance under tension-tension loading …

    mcmaster Repository record for Corrosion Fatigue of Friction Stir Welded Magnesium Alloy AZ31B: A Comparative Study (opens in a new tab)

  6. Experimental Testing of Fillet Welded T-Joints to Evaluate the NZS3404 Specified Safety Factors for Seismic Fillet Welds

    Welding is widely used in the construction and manufacturing industry. The quality of the weld on-site and weld design become the most important factors for structural safety and cost-effectiveness. Mainly there are five basic weld categories which are butt weld, fillet weld, corner joint weld, lap …

    auckland-tech Repository record for Experimental Testing of Fillet Welded T-Joints to Evaluate the NZS3404 Specified Safety Factors for Seismic Fillet Welds (opens in a new tab)

  7. MODELING AND TESTING OF WELDED STRUCTURAL JOINTS MACHINED WITH LASER CUTTING TECHNOLOGY

    … thesis focuses on the impact of using different welding techniques on the performance and failure mechanisms of Hollow Structural Section (HSS) joints manufactured by Laser Cutting Technology (LCT). In mid-high-rise steel structures, Circular or Rectangular Hollow Structural Sections (CHS/RHS) …

    trento Repository record for MODELING AND TESTING OF WELDED STRUCTURAL JOINTS MACHINED WITH LASER CUTTING TECHNOLOGY (opens in a new tab) Embargoed

  8. A microstructural investigation into the stationary shoulder corner friction stir welding of aluminium alloys

    … – stationary shoulder corner friction stir welding (SSCFSW). This technique involves welding at a 45° angle and using filler materials in order to produce rounded corner welds. The filler materials were later coated in copper to ascertain the flow behaviour of the material and to determine …

    whiterose Download file for A microstructural investigation into the stationary shoulder corner friction stir welding of aluminium alloys (opens in a new tab)

  9. Innovative cold-formed steel nested tapered box section portal frames with bolted-side plate joints

    … can be expensive due to the full penetration butt weld. This thesis proposes an alternative jointing system that uses bolted-side plates. The numerical work conducted in this study yields the following findings: • A shell finite element (FE) model was developed and validated using previously …

    waikato-masters Repository record for Innovative cold-formed steel nested tapered box section portal frames with bolted-side plate joints (opens in a new tab) Download file for Innovative cold-formed steel nested tapered box section portal frames with bolted-side plate joints (opens in a new tab)

  10. Utmattningshållfasthet hos svetsade detaljer i stålbroar med ortotropa plattor

    … performance. In many fatigue design standards, welded joints are divided into a number of different classes, each class having its own S-N curves for use in design calculations. In the fatigue design of bridges, the choice of suitable fatigue detail category is important to determine the life of …

    chalmers Repository record for Utmattningshållfasthet hos svetsade detaljer i stålbroar med ortotropa plattor (opens in a new tab)

  11. Finite element modelling for the assessment of residual stresses and failure mechanisms in welded connections

    <p>Despite the considerable amount of research on welded joints, their behaviour is still not fully understood due to their complexity. This research aims to contribute in this area with emphasis on some inherent features of the welded joints, namely welding-induced residual stresses and …

    soton Download PDF for Finite element modelling for the assessment of residual stresses and failure mechanisms in welded connections (opens in a new tab)

  12. Fatigue damage evaluation of cutout details in steel bridges

    … can be generally classified into two categories, welded and unwelded details. For welded details, the mechanism of fatigue crack initiation can be attributed to the initial weld defect introduced by the welding process, while for the unwelded structural details, the primary reasons for the fatigue …

    aalto Repository record for Fatigue damage evaluation of cutout details in steel bridges (opens in a new tab)

  13. Effects Of The Flash Welding Process On Mechanical And Microstructural Properties Of Structural Steel Joints Assessed Using Dest

    … steel angle specimens were joined by flash butt welding and the effects of varying process parameter settings on the resulting welds were investigated. The weld metal and heat affected zones were examined and tested using tensile testing, ultrasonic scanning, Rockwell hardness testing, …

    bucknell Repository record for Effects Of The Flash Welding Process On Mechanical And Microstructural Properties Of Structural Steel Joints Assessed Using Dest (opens in a new tab)

  14. The long-term behaviour of butt fusion welds in polyethylene pipeline systems

    … examine factors that influence the strength of butt welds and gain an understanding of the process of failure. The study was divided into several sectors. The first and primary part of the programme was to determine the extent to which the pipe system's long-term strength under both internal …

    brunel Repository record for The long-term behaviour of butt fusion welds in polyethylene pipeline systems (opens in a new tab)

  15. Analýza způsobů modelování procesu svařování metodou konečných prvků

    … Na výpočtové modelovanie sú využité programy SYSWELD a ANSYS, oba založené na metóde konečných prvkov. Riešené sú konkrétne procesy zvárania kútového a tupého zvaru dvoch dosiek. Výsledky z jednotlivých softvérov sú porovnané medzi sebou a overené pomocou experimentálnych výsledkov.

    brno-tech Repository record for Analýza způsobů modelování procesu svařování metodou konečných prvků (opens in a new tab)

  16. Využití rozkyvu hořáku pro svařování tupého a koutového svaru vysokopevnostních ocelí metodou MAG

    Diplomová práce se v první části zabývá rešerší na vysokopevnostní oceli, jejich strukturními efekty, svařitelností, dále metodami přenosu kovu a častými vadami svarů, které se u těchto ocelí vyskytují. V praktické části je navržen experiment pro vyšetření vlivu rozkyvu na tupém a koutovém spoji, u …

    brno-tech Repository record for Využití rozkyvu hořáku pro svařování tupého a koutového svaru vysokopevnostních ocelí metodou MAG (opens in a new tab)

  17. Analýza svarových spojů z termoplastů

    Tato diplomová práce se zabývá analýzou svarových spojů z termoplastů. Byly provedeny experimenty, ve kterých byly sady nesvařovaných těles, těles s oboustrannými koutovými svary a těles s tupými svary zkoušeny tahem a tříbodovým ohybem. Pro zkoušení byly vybrány dva materiály: polypropylén a …

    brno-tech Repository record for Analýza svarových spojů z termoplastů (opens in a new tab)

  18. Využití rozkyvu hořáku pro svařování tupého svaru metodou MAG korozivzdorné oceli

    Práca so zameraním na oblúkové zvarovanie korozivzdorných ocelí zamerané na metódu MAG, s literárnou štúdiou o danej problematike. Boli vybrané geometrie tupého zvaru s prípravou úkosom „Y“ a hrúbky materiálov, ktoré sú často využívané na konštrukciách využívaných v energetike a potravinárskom …

    brno-tech Repository record for Využití rozkyvu hořáku pro svařování tupého svaru metodou MAG korozivzdorné oceli (opens in a new tab)

Page 1 of 2