Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 115 for “"capillary force"”.

  1. Capillary Force in High Aspect-Ratio Micropillar Arrays

    … are susceptible to deformation due to surface forces, such as adhesive force and capillary force. In this thesis we have explored the capillary force driven mechanical instability of HAR micropillar arrays. We have shown that when a liquid is evaporated off the micropillar arrays, the pillars …

    penn Repository record for Capillary Force in High Aspect-Ratio Micropillar Arrays (opens in a new tab)

  2. Height modulation of nanopixel arrays via light controlled capillary force lithography

    … and lateral resolutions without compromise. Capillary force lithography (CFL), introduced by Suh et al. in 2001, represents a fusion of key aspects from both nanoimprint lithography and soft lithography, combining the molding of a polymer with the use of an elastomeric mold, respectively. …

    iastate Repository record for Height modulation of nanopixel arrays via light controlled capillary force lithography (opens in a new tab)

  3. Microstructure-induced capillary force effects on penetration and release in hydroxyapatite bone scaffolds

    … upon implantation via micropore-induced capillary forces. The localization and entrapment of cells within the micropores forms a reservoir of cells that not only can begin the process of bone formation but can also signal other cells to further enhance the regeneration process. I also …

    uiuc Repository record for Microstructure-induced capillary force effects on penetration and release in hydroxyapatite bone scaffolds (opens in a new tab)

  4. Theoretical and experimental investigation of oscillating heat pipes

    … oscillation characteristics of slug flow in a capillary tube is presented. The model considers the vapor bubble as the gas spring for the oscillating motions in a capillary tube including effects of capillary force, gas spring constant, dimensions, gravitational force, and initial pressure …

    missouri Repository record for Theoretical and experimental investigation of oscillating heat pipes (opens in a new tab)

  5. Characterization of the Motion and Mixing of Droplets in Electrowetting on Dielectric Devices

    … This investigation will examine the role of capillary forces on droplet manipulation to further the physical understanding of these devices. An analytical model for the capillary force acting on a confined droplet at equilibrium is developed here. Model predictions were validated using …

    toronto-retro Repository record for Characterization of the Motion and Mixing of Droplets in Electrowetting on Dielectric Devices (opens in a new tab)

  6. Particle scale investigation of the mechanisms of wet particle flow in rotating drums

    … based on the discrete element method (DEM). The capillary force and liquid distribution among particles were explicitly considered. Physical experiments were performed to validate the model, showing agreement in terms of flow patterns, repose angle and avalanche frequency. Particle flows were …

    unsw Repository record for Particle scale investigation of the mechanisms of wet particle flow in rotating drums (opens in a new tab)

  7. Shape Evolution of Nanostructures by Thermal and Ion Beam Processing

    … thermal fluctuations. Thus, the system-inherent capillary force can initiate morphological transformations during further processing steps or during operation at elevated temperature. Therefore and because of the ongoing miniaturization of functional structures which causes a general rise in …

    qucosa-diss

  8. Nanostructured Semiconductors for Electrochemical and Photoelectrochemical Water Splitting

    … morphology/structure tuning procedures, viz. capillary force-induced self-assembly and corrosion followed by regrowth, drastically increasing the water oxidation photocurrent density of nanostructured hematite photoanode. In addition to morphological changes, structural transformations were …

    anu Repository record for Nanostructured Semiconductors for Electrochemical and Photoelectrochemical Water Splitting (opens in a new tab)

  9. Stratification in Drying Particle Suspensions

    … cylinder and apply the results to understand the capillary force experienced by a spherical particle at a liquid-vapor interface. My analyses show that the capillary force is approximately linear with the displacement of the particle from its equilibrium location at the interface. An analytical …

    vt Repository record for Stratification in Drying Particle Suspensions (opens in a new tab)

  10. Renewable electricity power generation from solar steam generation processes / by Jingyuan Zhao.

    … properties via streaming potential under capillary force in water evaporation process and directional diffusion of free ions driven by ions concentration gradient along with absorbed water molecules gradient when exposed to the moisture.

    adelaide Repository record for Renewable electricity power generation from solar steam generation processes / by Jingyuan Zhao. (opens in a new tab)

  11. Enhancing Single and Two-Phase Heat Transfer of Microgap Heat Sinks Using Nano-Structure Coatings

    … and deteriorate heat transfer rate. The capillary force generated along the microchannel or microgap can enhance the liquid rewetting process and hence, delay CHF conditions. Moreover, flow boiling heat transfer coefficient (HTC) can also be enhanced because of promoting thin liquid film …

    south-carolina Repository record for Enhancing Single and Two-Phase Heat Transfer of Microgap Heat Sinks Using Nano-Structure Coatings (opens in a new tab)

  12. Simulation Study to Investigate the Effect of Natural Fractures on the Performance of Surfactant-Polymer Flood in Carbonate Reservoirs

    … runs were made to compare oil recovery capillary force, buoyancy force and viscous force. The simulation study indicates that critical water saturation should be reached before the start of surfactant-polymer flood to maximize oil recovery and utilize the capillary force. Also, when a …

    tamu Repository record for Simulation Study to Investigate the Effect of Natural Fractures on the Performance of Surfactant-Polymer Flood in Carbonate Reservoirs (opens in a new tab)

  13. Investigation of Rock-Fluid Interactions in Carbonate Reservoirs with the Use of Digital Rock Physics

    … These mechanisms were grouped into two types, capillary-force affecting (contact angle and interfacial tension), and viscous-force affecting (viscous fingering reduction). When comparing the data between the two approaches (laboratory- and numerical experiments) the results show that …

    unsw Repository record for Investigation of Rock-Fluid Interactions in Carbonate Reservoirs with the Use of Digital Rock Physics (opens in a new tab)

  14. An Investigation of Pore Collapse in Asymmetric Polysulfone Membranes

    … substructure. Water-wet membranes experience capillary force during water evaporation. Since the modulus of the membranes is lower than the capillary force, the membrane walls shrink and thicken giving rise to a condensed structure. The "skin" regulates permeation through the membranes which …

    vt Repository record for An Investigation of Pore Collapse in Asymmetric Polysulfone Membranes (opens in a new tab)

  15. Evaluation and Design of Wicking Geotextile for Pavement Applications

    … In unsaturated soils, suction (also called capillary force) between soil particles hold water and conventional geotextiles cannot provide drainage to capillary water within base courses. A new type of geotextile, wicking geotextile, was recently developed to remove water from soil via …

    ku Repository record for Evaluation and Design of Wicking Geotextile for Pavement Applications (opens in a new tab)

  16. INTEGRATION OF METAMATERIALS AND MEMS FOR NOVEL TUNING AND SENSING APPLICATIONS

    … aqueous environment was achieved. Moreover, capillary force was utilized as liquid driving force eliminating external power source in the proposed sensing platform. The study of micro/nanofluidic metamaterial-based sensor paves the way to practical biochemical application of infrared and …

    nus Repository record for INTEGRATION OF METAMATERIALS AND MEMS FOR NOVEL TUNING AND SENSING APPLICATIONS (opens in a new tab) Download file for INTEGRATION OF METAMATERIALS AND MEMS FOR NOVEL TUNING AND SENSING APPLICATIONS (opens in a new tab)

  17. Theoretical and Experimental Investigation of Adhesion in Microelectromechanical Systems

    … deformation due to both contact and adhesive forces was developed. Specifically included in this model was the solid surface interaction inside the contact area. It was found that due to asperity deformations, the capillary force of contacting asperities increases with increasing interference, …

    uiuc Repository record for Theoretical and Experimental Investigation of Adhesion in Microelectromechanical Systems (opens in a new tab)

  18. Dispersion of particles on liquid surfaces

    … This explosive dispersion is the consequence of capillary force pulling particles into the interface causing them to accelerate to a relatively large velocity. The maximum velocity increases with decreasing particle size; for nanometer-sized particles (e.g., viruses and proteins), the velocity on …

    njit Repository record for Dispersion of particles on liquid surfaces (opens in a new tab)

  19. Conceptual models of fluid flow in fractures

    … It is then absorbed by the matrix due to the capillary suction. Then, due to the capillary force, the liquid moves towards the heat source. A region of liquid vapor flow is formed which is called the heat pipe region. The heat pipe phenomenon will be analyzed for different models of fractures. …

    unlv Repository record for Conceptual models of fluid flow in fractures (opens in a new tab) Download PDF for Conceptual models of fluid flow in fractures (opens in a new tab)

  20. Understanding adhesion of pseudomonas fluorescens on household surfaces

    … interaction with the substratum, i.e. atomic force microscopy (AFM), spinning disc and micromanipulation. Pseudomonas fluorescens NCIMB 9046 was chosen as a model microorganism to study the cell-substrate adhesion. By having three different colloidal particles: stainless steel (Grade 304), …

    birmingham Download PDF for Understanding adhesion of pseudomonas fluorescens on household surfaces (opens in a new tab)

Page 1 of 6