Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 6 of 6 for “"carbon fiber structures"”.
-
Development Of Single And Array Electro-Chemical Sensors For Real-Time Trace Metal Analysis In Aqueous Environmental Media
… using fast-scan cyclic voltammetry (FSCV) at carbon-fiber microelectrodes (CFMs) to achieve rapid measurement of metal ions with high sensitivity, selectivity, and stability. Through optimizations this method showed strengths in real-time trace metal analysis. Analytical selectivity …
-
Evaluation of Advanced Conductive Nickel Materials for Strain Sensing in Carbon Fiber Reinforced Polymers
Due to their unique properties, carbon fiber reinforced polymers (CFRP) are becoming ever more prevalent in today's society. Unfortunately, CFRP suffer from a wide range of failure modes and structural health monitoring methods are currently insufficient to predict these failures. It is apparent …
-
Structural Analysis of Carbon Fiber-Epoxy Composite Surfaces with Polar Stacking Sequences
… a new method of constructing graphite-epoxy carbon fiber structures is examined. The method studied consists of placing small strips of carbon fiber pre-preg into the desired mold such that fibers emanate outward from one or more poles. The goals of this study were to (1) construct a flat …
-
Predicted Redidual Strength of Damaged IsoTruss® Structures
… in traditional single and hybrid-grid IsoTruss® structures. Residual strength was studied for structures subjected to axial compression, torsion and flexural bending, independently. Carbon/epoxy material properties were applied in all load cases, and fiberglass/epoxy material properties were also …
-
Design and Development of a 12-Degree-of-Freedom Quadruped Robot
… component sizing and material selection. A carbon-fiber chassis and redesigned leg assemblies were fabricated and validated through finite element analysis and physical testing. Kinematic models for the 3-DOF leg were developed, and both forward and inverse kinematics were validated in …
-
An Investigation of Damage Arrestment Devices Application with Fastener/Hole Interaction
… foam, Last-A-Foam FR-6710 with two layers of a carbon-fiber/epoxy weave, LTM45, on both sides of the foam. The specimens were loaded under a compressive strain of 0.5 mm/min. The damage arrestment devices’ thickness was varied and tested under both monotonic and fatigue loading. The experimental …