Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 20 for “"cationic starch"”.

  1. Interactions between cationic starch and anionic surfactants

    The interactions between cationic starch (CS) and anionic surfactants and their mixtures were studied by using surface tension, solution viscosity and dynamic light scattering (DLS) measurements. The composition and structure of the complexes of CS and surfactants were studied by using phase …

    aalto Repository record for Interactions between cationic starch and anionic surfactants (opens in a new tab)

  2. Cationic Starch Synthesis, Development, and Evaluation for Harvesting Microalgae for Wastewater Treatment

    … harvesting microalgae from water using modified starch. Modified starch, or in this case, cationic starch, is an organic compound that when used to harvest microalgae in large quantities has shown no environmental concerns. Moreover, starch is inexpensive, biodegradable, and is abundantly found …

    utahstate Repository record for Cationic Starch Synthesis, Development, and Evaluation for Harvesting Microalgae for Wastewater Treatment (opens in a new tab)

  3. Synthesis and characterization of starch-based cationic flocculants for harvesting microalgae.

    … was to develop a procedure to synthesize starch-based cationic flocculants which would be renewable, biodegradable, and non-toxic with harvest performance comparable with or better than commercial flocculants. The procedure involves cationization reaction between starch and …

    umn Repository record for Synthesis and characterization of starch-based cationic flocculants for harvesting microalgae. (opens in a new tab)

  4. De-inking toner-printed paper by selective agglomeration

    … key factors in agglomeration: concentration of cationic starch released from sheets in the repulper, oil composition, agitation rate, time and temperature. Furthermore, we examine how and why each factor influences agglomeration, and a population balance model is developed to help determine the …

    washington Repository record for De-inking toner-printed paper by selective agglomeration (opens in a new tab)

  5. Interactions of microfibrillated cellulose and cellulosic fines with cationic polyelectrolytes

    … to study their interactions with high molar mass cationic polyelectrolytes; and to demonstrate novel examples of their utilization. The work was performed, and its results discussed mainly from papermaking point of view, but the results are also well applicable in other fields of industry. …

    aalto Repository record for Interactions of microfibrillated cellulose and cellulosic fines with cationic polyelectrolytes (opens in a new tab)

  6. Development of Innovative Flocculation Technologies for Agricultural Water Treatment

    … aspect of the research involves synthesizing cationic starch (CS), a flocculant derived from an underutilized resource, potato peel waste (PPW), thus supporting a circular economy (Ag-back to Ag-process). Through precise etherification with (3-chloro-2 hydroxypropyl) trimethylammonium chloride …

    sdstate Repository record for Development of Innovative Flocculation Technologies for Agricultural Water Treatment (opens in a new tab)

  7. Feasibility of Low-cost Pretreatment Methods of Produced Water in the Permian Basin

    … coagulation process. In the flocculation process cationic starch and polyamine were tested with a dose of 20 mg/L. After the jar test pH, TSS, TDS, ZP, and turbidity of samples were measured again. The optimum dose of the coagulants was determined based on the maximum TSS removal. All measured …

    tamu Repository record for Feasibility of Low-cost Pretreatment Methods of Produced Water in the Permian Basin (opens in a new tab)

  8. Use of calcium-based materials for phosphorus removal from greenhouse wastewater

    … was improved via flocculation using guar gum or cationic starch. Material columns incorporating steel slag or concrete waste removed >99% over repeated applications, and demonstrated high phosphate retention. Both methods also removed some micronutrient contaminants, and recovered P and other …

    guelph Repository record for Use of calcium-based materials for phosphorus removal from greenhouse wastewater (opens in a new tab)

  9. The Investigation of Carboxyl Groups of Pulp Fibers during Kraft Pulping, Alkaline Peroxide Bleaching, and TEMPO-mediated Oxidation

    … effect of increased fiber charge on refining, cationic starch adsorption, and hornification was examined. The final experiment investigates the effect of TEMPO-mediated oxidation of an ECF bleached softwood kraft pulp on carboxyl group content, carbonyl group contents, degree of polymerization, …

    gatech Repository record for The Investigation of Carboxyl Groups of Pulp Fibers during Kraft Pulping, Alkaline Peroxide Bleaching, and TEMPO-mediated Oxidation (opens in a new tab)

  10. Modification of surfaces with adsorption of amphiphilic polymers

    … types of polymers, including derivatives of cationic starch (CS), both charged and neutral synthetic block-structured polymers with amphiphilic character and different levels of solubility, on different well-defined model surfaces and the consequential changes in the properties of the …

    aalto Repository record for Modification of surfaces with adsorption of amphiphilic polymers (opens in a new tab)

  11. Interaction of fibres and additives in mechanical pulp suspensions

    … TMP has resulted in the requirement for using cationic starch as a strength enhancing agent. Starch addition compensates for the strength loss due to addition of PCC. This thesis examines the interactions of TMP fibres, PCC, starch and other additives used in mechanical grade papermaking. The …

    ubc Repository record for Interaction of fibres and additives in mechanical pulp suspensions (opens in a new tab) Download PDF for Interaction of fibres and additives in mechanical pulp suspensions (opens in a new tab)

  12. Surface interactions in TMP process waters

    … work was started by studying the adsorption of cationic starch onto the oppositely charged silica surface with the quartz crystal microbalance with dissipation (QCM-D). The aim of these preliminary adsorption studies was to better understand the electrostatic interactions between polyelectrolyte …

    aalto Repository record for Surface interactions in TMP process waters (opens in a new tab)

  13. Short-Fiber Reinforced All-Cellulose Composites Using Aqueous NaOH Solution

    … concentration. Layer by layer deposition of cationic starch and carnauba wax was shown to result in surface hydrophobized all-cellulose composites. Process optimisation was performed to obtain high water contact angle (122 °) while maintaining the composite mechanical properties. Overall, the …

    aalto Repository record for Short-Fiber Reinforced All-Cellulose Composites Using Aqueous NaOH Solution (opens in a new tab)

  14. Synthesis and characterization of novel cellulosics

    … were found to be agglomerated in presence of cationic starch, exhibiting their future application in chromatographic separation. In the third study, model primary amine compounds such as methyl and butyl amines were grafted to nanowhisker surfaces following periodate oxidation and reductive …

    gatech Repository record for Synthesis and characterization of novel cellulosics (opens in a new tab)

  15. Adsorption of lignin and lignin/cationic polymer complexes on cellulose fibres and their effect on sheet properties

    … adsorption may occur in the presence of cationic polymers. The course of adsorption depended on the sequence of polymer addition. Kraft lignin is adsorbed as a monolayer onto cationised surfaces. In the aqueous solutions lignin and cationic polymers (PDADMAC and cationic starch (CS)) form …

    aalto Repository record for Adsorption of lignin and lignin/cationic polymer complexes on cellulose fibres and their effect on sheet properties (opens in a new tab)

  16. Functionalized Starch Nanoparticles for Pulp-Based Active Packaging

    The characterization of functionalized cationic starch nanoparticles (StNPs) was conducted in this study. Three different strategies in the preparation of sustainable and biodegradable active packaging materials were explored. These strategies are: (1) to improve wet and dry strength by optimizing …

    waterloo Repository record for Functionalized Starch Nanoparticles for Pulp-Based Active Packaging (opens in a new tab)

  17. Einfluss variierender Substitutionsgrade amphiphiler Polysaccharide auf ihre physikochemischen Eigenschaften und deren potentielle Anwendung bei der Sticky-Kontrolle

    … agents. Polysaccharides derived from potato starch and chitosan have been modified with benzyl- and the first one with additionally cationic hydroxypropyl-trimethylammonium groups of different degrees of substitution (DS). The aim of this work was to characterize the solution properties of …

    qucosa-diss

  18. Starch-based Polymers as Flocculants of Oil Sands Mature Fine Tailings and for Extraction of Bitumen from Oil Sands

    … consolidation and dewatering of MFT. A number of starch-based flocculants were synthesized and examined as flocculants for MFT. Thermoresponsive hydroxybutyl (HB) corn starch (HB-CS) and potato starch (HB-PS) were shown to flocculate 2 and 10 wt % MFT and their thermoresponsive behavior was …

    waterloo Repository record for Starch-based Polymers as Flocculants of Oil Sands Mature Fine Tailings and for Extraction of Bitumen from Oil Sands (opens in a new tab)