Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 65 for “"cavity geometry"”.

  1. Drag reduction over a low reynolds number cavity surface

    … The computational model consists of an embedded cavity within a Couette flow with the flat plate moving transversally over the cavity. The effects of cavity geometry and Reynolds number are analyzed separately. The model is simulated in ANSYS FLUENT and provides qualitative insight into the …

    alabama Repository record for Drag reduction over a low reynolds number cavity surface (opens in a new tab)

  2. An experimental investigation of standing vortices in an open cavity

    … profiles within and directly above a rectangular cavity with air flow across its mouth, such that standing vortices are induced in the cavity. The constant temperature hot-wire anemometer was used to determine velocity profiles at 75 feet per second free stream velocity and cavity depth over …

    nps Repository record for An experimental investigation of standing vortices in an open cavity (opens in a new tab)

  3. A Photographic Investigation of Bubble Nucleation from Artificial Cavities

    … penetration of the liquid-vapor interface into a cavity after bubble departure appeared to be inertia controlled. Cavity interior geometry and cleanliness had a direct effect upon the liquid-vapor interface penetration distance. The depth of penetration of the interface increased as cavity size …

    nps Repository record for A Photographic Investigation of Bubble Nucleation from Artificial Cavities (opens in a new tab)

  4. An Experimental Study of Drag Reduction Due to the Roller Bearing Effect Over Grooved Surfaces Inspired by Butterfly Scales

    … the entrapped vortex (or vortices) inside each cavity can act as a fluidic bearing to the outer boundary layer flow resulting in reduced surface or skin friction drag. This study conducted experiments on cavity embedded flat plates, mimicking the butterfly scale geometry, documenting this …

    alabama Repository record for An Experimental Study of Drag Reduction Due to the Roller Bearing Effect Over Grooved Surfaces Inspired by Butterfly Scales (opens in a new tab)

  5. Raman gain and lasing from cold potassium atoms in a ring cavity

    … overlapped with the modes of a high-finesse ring cavity. Optical gain was observed with the system in steady state, without any beams additional to the normal cooling and repump beams in a potassium-39 magneto-optical trap. This was found to operate on a Raman gain mechanism between atomic …

    birmingham Download PDF for Raman gain and lasing from cold potassium atoms in a ring cavity (opens in a new tab)

  6. Natural convection in two-dimensional irregular cavities

    … solution were investigated first. For the cavity geometries studied,, it was observed that, except for grid boundary conditions which led to undesirable grids, most combinations of grid and vorticity boundary conditions gave results of acceptable accuracy (relative error less than one …

    ubc Repository record for Natural convection in two-dimensional irregular cavities (opens in a new tab) Download PDF for Natural convection in two-dimensional irregular cavities (opens in a new tab)

  7. Large Length Scale Droplet Capillary Phenomena: Generation, Jump, and Capture

    … Lastly, the collapse of an air jet blown cavity and subsequent generation of a jet and jet droplets is investigated both experimentally and numerically. It is shown that surface tension forces alone are sufficient to generate a liquid jet from the cavity collapse. The dependence of the …

    portland-state Repository record for Large Length Scale Droplet Capillary Phenomena: Generation, Jump, and Capture (opens in a new tab)

  8. Advanced analysis and design of polymer sheet extrusion

    … design polymer extrusion dies in which the die cavity geometry is computed to minimize the pressure drop while delivering a uniform exit velocity and a uniform temperature.

    missouri Repository record for Advanced analysis and design of polymer sheet extrusion (opens in a new tab)

  9. Investigation of the Effects of an Upstream Cavity on the Secondary Flow in Transonic Turbine Blade Passages with Endwall Contouring

    … with respect to the presence of an upstream cavity that approximates the gap present in actual engines between the rotor and stator of an HP turbine. Further, it aims to assess the viability of using non-axisymmetric endwall contouring to reduce endwall losses, including those generated by …

    carleton Repository record for Investigation of the Effects of an Upstream Cavity on the Secondary Flow in Transonic Turbine Blade Passages with Endwall Contouring (opens in a new tab)

  10. Low Reynolds Number Two- and Three-Dimensional Cavity Flows and the Effect of a Cavity on Airfoil Tonal Noise

    … discusses the flow over rectangular and modified cavity geometries at low Reynolds number, as well as the role of a cavity in an airfoil surface in the production of airfoil tonal noise. Cavity flows can be found on many land, air and water vehicles where they can be a significant source of tonal …

    adelaide Repository record for Low Reynolds Number Two- and Three-Dimensional Cavity Flows and the Effect of a Cavity on Airfoil Tonal Noise (opens in a new tab)

  11. Protocols for evaluating the stability of induced cavities in underground thin seam coal deposits created by in-situ borehole mining

    … process, and a technical understanding between cavity formation and stability for a given set of operating characteristics and geomechanical rock properties. While each of these areas are important to the overall success of the technology, understanding the structural dynamics of these cavities …

    colo-mines Repository record for Protocols for evaluating the stability of induced cavities in underground thin seam coal deposits created by in-situ borehole mining (opens in a new tab)

  12. 3D electromagnetic simulations of a 1.6 cell S-band photoinjector: Emittance studies for electron microscopy

    … to the scale disparity between the macroscopic cavity geometry and the femtosecond-scale bunch kinematics. To enable optimization in a desktop computing environment, this work presents a streamlined 3D electromagnetic Particle-in-Cell (PIC) simulation framework optimized for 400-femtosecond …

    unm Repository record for 3D electromagnetic simulations of a 1.6 cell S-band photoinjector: Emittance studies for electron microscopy (opens in a new tab)

  13. Ablation onset in unsteady hypersonic flow about nose-tips with a forward-facing cavity

    A forward-facing cavity is examined as a means of reducing the severe heating and delaying ablation onset at the nose-tip of a hypersonic vehicle. Whereas previous studies have concentrated on heating rates alone, the present study addresses the e ect of the cavity on ablation onset times through …

    texas Repository record for Ablation onset in unsteady hypersonic flow about nose-tips with a forward-facing cavity (opens in a new tab) Restricted access

  14. Quantum electrodynamics of semiconducting nanomaterials in optical microcavities

    … this thesis I present improvements of the open cavity platform which serves to confine the electromagnetic field with mode volumes down to the λ<sup>3</sup> regime and demonstrate results in both the weak and strong coupling regimes of cavity quantum electrodynamics with a range of different …

    oxford Repository record for Quantum electrodynamics of semiconducting nanomaterials in optical microcavities (opens in a new tab)

  15. Transverse mode properties of lasers with Gaussian gain

    … and differ greatly from the modes of the same cavity with a quadratic gain. It is found that the cavity geometry strongly influences mode formation around degenerate cavity geometries throughout a broad range of operational parameters. The beam propagation method is used to evolve the field …

    arizona-thes Repository record for Transverse mode properties of lasers with Gaussian gain (opens in a new tab)

  16. Determination and Analysis of the Spectral Emissivity of a Blackbody Simulator Source

    … investigated. Based on the blackbody simulator cavity geometry and material, the methods of Gouffé, Kelly, and Bartell [1] were used to calculate the theoretical spectral emissivity. The experimental phase of this study involved using two Fourier Transform Infrared (FTIR) instruments to measure …

    ut-knoxville Repository record for Determination and Analysis of the Spectral Emissivity of a Blackbody Simulator Source (opens in a new tab)

  17. Automated Hybrid Singularity Superposition And Anchored Grid Pattern Bem Algorithm For The Solution Of The Inverse Geometric Problem

    … by reconstructing the unknown subsurface cavity geometry using boundary element methods, a genetic algorithm, and Nelder-Mead non-linear simplex optimization. The heat conduction problem is solved utilizing the boundary element method, which calculates the difference between the measured …

    ucf Repository record for Automated Hybrid Singularity Superposition And Anchored Grid Pattern Bem Algorithm For The Solution Of The Inverse Geometric Problem (opens in a new tab)

  18. Engineering laser modes in VCSELs with structured cavity

    … low fabrication and integration costs, vertical cavity surface emitting lasers (VCSELs) are popular laser devices for large volume datacom and consumer applications. The properties of a laser beam such as spectrum, polarization and beam divergence are associated with the laser modes which …

    qu-belfast Repository record for Engineering laser modes in VCSELs with structured cavity (opens in a new tab) Embargoed until 2027-07-31

  19. Replacement Rates of Initially Hydrocarbon-Filled Microscopic Cavities with Water

    … affected by initial fluid motion, specific cavity geometry, and cavity penetration mechanisms. Image analysis reveals the geometry of the oils in the cavities and shows how the transition from hydrocarbon-fully-filled to hydrocarbon-partially-filled states occurs in the SLL system.

    byu Repository record for Replacement Rates of Initially Hydrocarbon-Filled Microscopic Cavities with Water (opens in a new tab) Download PDF for Replacement Rates of Initially Hydrocarbon-Filled Microscopic Cavities with Water (opens in a new tab)

  20. A Numerical Study of Micro Synthetic Jet and Its Applications in Thermal Management

    … jet flow was conducted. The synthetic jet cavity was modeled as a rigid chamber with a piston-like moving diaphragm at its bottom. The Shear-Stress-Transportation (SST) k-omega and #61559; turbulence model was employed to simulate turbulence. Based on time-mean analysis, three flow regimes …

    gatech Repository record for A Numerical Study of Micro Synthetic Jet and Its Applications in Thermal Management (opens in a new tab)

Page 1 of 4