Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 76 for “"cemented carbide"”.

  1. MACHINING WEAR OF CEMENTED CARBIDE INSERTS

    … work investigates the machining wear of a mixed-carbide (A30; Sumitomo Electric) and a tungsten-carbide (F-grade; Toshiba Tungaloy) cemented carbide inserts when machining medium-carbon steel under different cutting conditions (cutting speed =50-300 m/min, feed rate =0.1-0.3 mm/rev ). The effects …

    nus Repository record for MACHINING WEAR OF CEMENTED CARBIDE INSERTS (opens in a new tab) Download file for MACHINING WEAR OF CEMENTED CARBIDE INSERTS (opens in a new tab)

  2. The Micromechanisms of Cemented Carbide Cutting Tool Wear

    … of a medium carbon steel using uncoated tungsten carbide-cobalt tools has been established.</p> <p>SIMS analysis of the chip material next to the tool-chip interface showed concentration profiles of tungsten and cobalt to a depth of about 0.5 micron. The maximum concentration of tungsten is seen …

    mcmaster Repository record for The Micromechanisms of Cemented Carbide Cutting Tool Wear (opens in a new tab)

  3. Fatigue Damage in a WC-Nickel Cemented Carbide Composite

    A model WC-Ni cemented carbide was designed to investigate the response of this type of composite to compressive cyclic loading. The material's monotonic stress-strain behavior was studied in the compressive range, revealing considerable micro-strain plasticity and rapid strain-hardening …

    rice Repository record for Fatigue Damage in a WC-Nickel Cemented Carbide Composite (opens in a new tab)

  4. Residual stress and stress relaxation in cemented carbide composites

    "Cemented carbides (cermets or hardmetals) are a class of materials consisting of large fractions of transition metal carbide surrounded by a small fraction of iron-group metal or alloy. These composites possess the wear resistance of carbides combined with the toughness of a ductile metal binder. …

    missouri Repository record for Residual stress and stress relaxation in cemented carbide composites (opens in a new tab)

  5. High Temperature Deformation Behavior of Cemented Carbide Cutting Tools

    Made available in DSpace on 2014-12-12T00:32:37Z (GMT). No. of bitstreams: 1 7514078.pdf: 4565521 bytes, checksum: b396e97761098d04753d979246661b6b (MD5) Previous issue date: 1975

    uiuc Repository record for High Temperature Deformation Behavior of Cemented Carbide Cutting Tools (opens in a new tab)

  6. The effect of compressive residual stresses on the properties of tumbled-processed cemented carbide

    For cemented carbide, classified as a brittle material, very little plastic deformation will occur preceding the initiation of a crack and ultimate failure. It is well known that compressive residual stress (CRS) helps to counteract the inherent brittle nature of cemented carbide. By focusing on …

    birmingham Download PDF for The effect of compressive residual stresses on the properties of tumbled-processed cemented carbide (opens in a new tab)

  7. A STUDY OF THE EFFECT OF A SURFACE TREATMENT ON THE PERFORMANCE OF CEMENTED CARBIDE INSERTS

    … surface properties and cutting performance of cemented carbide inserts. In WPC, the surface of the material is bombarded with millions of high-velocity fine shot generating a uniform layer of plastic deformation near the surface. The plastically deformed layer will have higher compressive …

    mcmaster Repository record for A STUDY OF THE EFFECT OF A SURFACE TREATMENT ON THE PERFORMANCE OF CEMENTED CARBIDE INSERTS (opens in a new tab)

  8. ADDITIVE MANUFACTURING OF CERAMIC MATERIALS

    Tungsten Carbide (WC) which typically exists in a form of cemented carbide system is one of the advanced ceramics that is commonly used for wear resistance application because of its excellent mechanical properties. Cobalt (Co) is the commonly used binder for this cemented carbide system due to its …

    nus Repository record for ADDITIVE MANUFACTURING OF CERAMIC MATERIALS (opens in a new tab) Download file for ADDITIVE MANUFACTURING OF CERAMIC MATERIALS (opens in a new tab)

  9. Development of innovative TCT saw blades for high speed cutting of metallic alloys

    … PVD coated multipoint cutting tool with cemented carbide brazed inserts for high-speed cutting of ferrous alloys. The aim of the research was to optimize the properties of the constituent materials in order to maximize their durability and provide a constant level of surface finishing of …

    poli-torino Repository record for Development of innovative TCT saw blades for high speed cutting of metallic alloys (opens in a new tab)

  10. Machinability study of tool steel (Din 1.2311) through end milling

    … speed steel, coated high speed steel, uncoated cemented carbide and coated cemented carbide. The results of these tests were plotted as graphs in order to assess the differences between the different tools. From these machinability assessment tests, a cutting speed, feed rate and depth of cut …

    dcu Download PDF for Machinability study of tool steel (Din 1.2311) through end milling (opens in a new tab)

  11. Estudo da substituição parcial do ligante Co pelo Nb no metal duro preparado via MAE e sinterizado em forno convencional, alto vácuo e por pulso de plasma

    Hard metal, also known as cemented carbide, is a widely used material in various applications such as turning, milling, and drilling. The most commonly used hard metal consists of a major hard phase of WC (tungsten carbide) and a minor metallic binder phase of Co (cobalt), usually making up less …

    brazil-ufrn Repository record for Estudo da substituição parcial do ligante Co pelo Nb no metal duro preparado via MAE e sinterizado em forno convencional, alto vácuo e por pulso de plasma (opens in a new tab)

  12. WEAR BEHAVIOUR OF COATED CARBIDE TOOLS DURING MACHINING OF Ti6Al4V AEROSPACE ALLOY

    … alloys still revolves around the use of uncoated cemented carbide tools, although recently TiAlN coatings are being recommended by tool manufacturers. However, both uncoated and TiAlN coated cemented carbide tools have yet to achieve the desired tool life andproductivity. Hence, a variety of …

    mcmaster Repository record for WEAR BEHAVIOUR OF COATED CARBIDE TOOLS DURING MACHINING OF Ti6Al4V AEROSPACE ALLOY (opens in a new tab)

  13. Machining of a high-alloy tool steel produced by electron beam powder bed fusion

    … specimens, showing the fine and evenly dispersed carbides with estimated elemental composition. The grinding tests were done using an external centerless shoe setup, which were found forgiving with reference to a rough surface texture and deviating geometry of the as-printed rings. Grindability …

    chalmers Repository record for Machining of a high-alloy tool steel produced by electron beam powder bed fusion (opens in a new tab)

  14. Efeitos do material de ferramenta e das técnicas de lubrirrefrigeração na vida da ferramenta e na superfície usinada por fresamento do ferro fundido branco alto cromo

    … case of HCWCI. The HCWCI presents 28% of M7C3 carbides in a pearlite or martensitic matrix. Researches about machining of HCWCI are focused on the application of PCBN (Polycrystalline Cubic Boron Nitride) in hard turning due to high wear rates and temperatures on the cutting edges. However, in …

    brazil-ufrn Repository record for Efeitos do material de ferramenta e das técnicas de lubrirrefrigeração na vida da ferramenta e na superfície usinada por fresamento do ferro fundido branco alto cromo (opens in a new tab)

  15. Fresamento com ar quente: uma proposta para minimizar a formação de trincas térmicas em ferramentas de metal duro

    … of minimizing the thermal cracks formation on cemented carbide inserts during face milling. The main focus of investigation was based on the observation that milling process is an interrupted machining process, which imposes cyclic thermal loads to the cutting tool, causing frequent stresses …

    brazil-ufrn Repository record for Fresamento com ar quente: uma proposta para minimizar a formação de trincas térmicas em ferramentas de metal duro (opens in a new tab)

  16. Structure-Property Evaluation of CrN Coatings Developed for BUE Dominated High-Speed Machining Applications

    … hardness compared to high-speed steel and cemented carbide along with notable protective capabilities against corrosion and wear. These coatings have been successfully used to enhance the properties of cemented carbide and steel tools while safeguarding their surfaces. By adjusting …

    mcmaster Repository record for Structure-Property Evaluation of CrN Coatings Developed for BUE Dominated High-Speed Machining Applications (opens in a new tab)

  17. Effect of electromagnetic field in machining process

    … is investigated. The flank wear of widely used cemented carbide tool against the ferromagnetic carbon steels decreased dramatically in the presence of magnetic field even when it is extremely weak. In turning and milling process, the experimental examination showed that the tool wear reduced …

    nus Repository record for Effect of electromagnetic field in machining process (opens in a new tab) Download file for Effect of electromagnetic field in machining process (opens in a new tab)

  18. A study of machining parameters to optimize surface finish in metal cutting through CNC

    … cutting tool materials(high speed steel and cemented carbide) and a workpiece of Aluminium. The results have been then evaluated and analyzed to see the effects of various combinations of cutting conditions, that is, feed, speed, and depth of cut. Recommendations have been made on the basis …

    njit Repository record for A study of machining parameters to optimize surface finish in metal cutting through CNC (opens in a new tab)

Page 1 of 4