Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 24 for “"central composite designs"”.
-
Mixed-Factors Central-Composite Designs: A Theoretical and Empirical Comparison
Made available in DSpace on 2014-12-13T18:21:39Z (GMT). No. of bitstreams: 1 7624069.pdf: 6440030 bytes, checksum: 04b573b0e568bb85e333e9dbd649d613 (MD5) Previous issue date: 1976
-
Recommendations for Design Parameters for Central Composite Designs with Restricted Randomization
In response surface methodology, the central composite design is the most popular choice for fitting a second order model. The choice of the distance for the axial runs, alpha, in a central composite design is very crucial to the performance of the design. In the literature, there are plenty of …
-
Graphical Tools, Incorporating Cost and Optimizing Central Composite Designs for Split-Plot Response Surface Methodology Experiments
… industrial experiments, completely randomized designs (CRDs) are impractical due to restrictions on randomization, or the existence of one or more hard-to-change factors. Under these situations, split-plot experiments are more realistic. The two separate randomizations in split-plot experiments …
-
Experimental designs for multiple responses with different models
<p>Central composite designs [Box and Wilson (1951)] and Box-Behnken designs [Box and Behnken (1960)] are both widely accepted and used experimental designs for fitting second order polynomial models in response surface methods. However, these designs are based only on the number of explanatory …
-
Optimality criteria applied to certain response surface designs
… was applied to several classes of RSM designs to find optimal choices of design parameters. Further, previous results on D-optimal RSM designs were extended. The designs resulting from the use of the two criteria were compared. Two other design criteria were also studied. These were IV, …
-
Response Surface Method for Time-Variant Reliability Analysis
… modeled by second order polynomials fitted using central composite designs applied to data from response time histories. The structural failure probability conditional upon the uncertain system parameter values is assumed to follow an extreme value distribution, the parameters of which are fitted …
-
CATCHMENT MODEL CALIBRATION SCHEMES
… its improved version, Fractional Factorial and Central Composite Designs (FFD-CCD) based response surface calibration scheme; (2) Neural Network (NN) based response surface calibration scheme; and (3) Genetic Algorithm (GA) based calibration scheme. The catchment model used in the study is the …
-
Minimizing Leakage in Thin Walled Structures Printed Through Selective Laser Melting
… border/fill contour laser tool path. Three central composite designs (CCD) were created to optimize the laser parameters of borders to minimize leakage rate and porosity. The two factors changed were border laser power and scanning speed. The center points of the CCDs were 0.24 J/mm, 0.20 …
-
Measurement Error in Designed Experiments for Second Order Models
… in the planning and analysis of experimental designs. A familiar model for this type of ME, called the Berkson error model, is discussed at length. Previous research has examined the effect of Berkson error on two-level factorial and fractional factorial designs. This dissertation extends the …
-
Coal flotation : statistical comparison of a pilot flotation column and a batch mechanical cell
… and a batch mechanical cell using experimental designs of the factorial class after the coal had been stage crushed and ground to about 96 percent minus 600 µm, the feed size to the flotation circuit at Bullmoose Coal Mine. The objective was to optimise statistically the two flotation units …
-
Augmenting Definitive Screening Designs
… Some standard and classical response surface designs are $3^k$ Factorial Designs, Central Composite Designs (CCDs), and Box-Behnken Designs (BBDs). They can all be used to fit a second-order polynomial model efficiently and allow for some testing of the model's lack of fit. When performing …
-
On a response surface investigation of water transport in membrane humidifiers
… and membranes. A range of experimental designs were evaluated and a central composite design selected to produce a response surface model. The numeric factors chosen were wet and dry stream flow rates and temperatures and the categoric factor was pressure. Four humidifiers were tested …
-
Evaluation of functionality of commercial resistant starches in food systems : a thesis presented in partial fulfillment of the requirements for the degree of Masters of Technology at Massey University
… was developed using fractional factorial and central composite designs for evaluation of the soup model. The viscosity of the soup model was determined using Paar Physica rheometer and the sensory analysis was done using acceptance and simple difference testing. The rheological properties, …
-
Dynamic reliability analysis for nonlinear structures using stochastic finite element method
… terms) are proposed. A mixture of saturated and central composite designs is used to assure both efficiency and accuracy of the algorithm. Sensitivity analysis is used to improve the efficiency further. The unique feature of the algorithm is that it is capable of calculating risk using both …
-
An approach to the optimisation of partial extractions for use in geochemical exploration
… subsequently optimized, on the basis of central composite designs. Conventional partial extraction (acetate, hydroxylamine and aqua regia) data, displayed high variability for some major and trace metals surrounding the periphery of mineralisation at Mandamah but little indication of …
-
Adding Value to Lignocellulosic Biorefinery: Efficient Process Development of Lignocellulosic Biomass Conversion into Polyhydroxybutyrate
… supplement formulations with Plackett-Burman and central composite designs. Second, fed-batch cultivation at bioreactor scale (1.7 L) were conducted to enhance PHB production to 4.5 g/L. This is the highest PHB production from lignin that the author has been aware of in the literature.
-
A PEGylated Nanocarrier for Oral Delivery of Immunomodulator Thymopentin
… the thin film hydration method and optimised by central composite designs with following recipe: 2 μmoL of DCP; 30 μmol cholesterol (including 22.5 μmol PEG600-cholesterol); 120 μmol Span 60; 10mg EDTA in 10 mL water containing 10 of TP5 with 0.2 mg SBTCI; and 60 minutes for 60°C hydration. The …
-
New design comparison criteria in Taguchi's robust parameter design
… necessary to achieve the goals of RPD. Possible designs for use in RPD are quite numerous. Standard designs such as crossed array designs, Plackett-Burman designs, combined array factorial designs and many second order designs all vie for a place in the experimenters tool kit. New criteria are …
-
Multi-sensor Optimization Of The Simultaneous Turning And Boring Operation
… were feasible. The next three set s of designs of experiments used Central Composite Designs to build empirical models of each desired response in terms of the four factors and to optimize the process. Each design of experiments was compared with one another to validate that the results …
-
The use of correlated simulation experiments in response surface optimization
… fitting a first order model, two-level factorial designs are used to evaluate the correlation induction strategies, and in the second order case, four design classes are considered; central composite designs, Box-Behnken designs, three-level factorial designs, and small composite designs. The …
Page 1 of 2