Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 16 of 16 for “"ceramic fiber"”.

  1. Nano ceramic fiber reinforced silicone maxillofacial prosthesis

    … this study was to investigate the effect of nano ceramic fiber fillers on the physical properties of VST-50HD silicone maxillofacial prosthesis. Nano alumina fibers at 2 percent, 4-percent, and 6-percent wt were mixed into the VST-50HD silicone elastomer (Factor II Inc., Lakeside, AZ), a …

    iupui Repository record for Nano ceramic fiber reinforced silicone maxillofacial prosthesis (opens in a new tab)

  2. Heat transfer mechanisms in highly porous fibrous insulation from vacuum to high pressures--experiment and modeling

    Highly porous fibrous ceramics are widely used as insulating materials in thermal systems due to their high temperature limits and light weight. An experimental apparatus, using the radial flow method, has been developed to evaluate heat transfer in highly porous fibrous ceramic materials. The …

    colo-mines Repository record for Heat transfer mechanisms in highly porous fibrous insulation from vacuum to high pressures--experiment and modeling (opens in a new tab)

  3. Permanent Passive Fire Protection Against Wildland-Urban Interface Fires

    … materials include structural wrap, Kaowool, ceramic fiber insulation, Pyrogel, and intumescent paint. The sidings include wood siding, vinyl siding, and hardie board. The testing took place in a burn room to simulate the conditions of a wildland fire. Post-burn charring evaluations and …

    byu Repository record for Permanent Passive Fire Protection Against Wildland-Urban Interface Fires (opens in a new tab) Download PDF for Permanent Passive Fire Protection Against Wildland-Urban Interface Fires (opens in a new tab)

  4. Field Simulation for the Microwave Heating of Thin Ceramic Fibers

    Microwave processing of ceramics has seen a growth in research and development efforts throughout the past decade. One area of interest is the exploration of improved heating control through experiments and numerical modeling. Controlled heating may be used to counteract non-uniform heating and …

    vt Repository record for Field Simulation for the Microwave Heating of Thin Ceramic Fibers (opens in a new tab)

  5. Passive, Self-Healable, Dielectric Elastomers for Structural Health Monitoring

    … sensor arrays around a layer of woven ceramic fiber with conductive fabric electrodes, hypervelocity impact testing, and self-healing efficiency tests are performed and confirm the sensors capabilities. The performed tests demonstrate a measurable change in capacitance associated with …

    embry-riddle Repository record for Passive, Self-Healable, Dielectric Elastomers for Structural Health Monitoring (opens in a new tab)

  6. Processing and characterization of continuous fiber ceramic nanocomposites by preceramic polymer pyrolysis

    In this work, two types of Continuous Fiber Ceramic Composites (CFCCs) were manufactured using preceramic polymer pyrolysis method for corrosion and mechanical testing. The two types of fiber reinforcements were Nicalon™ and Carbon fibers, and KiON CERASET® preceramic polymer was used as the matrix …

    hawaii Repository record for Processing and characterization of continuous fiber ceramic nanocomposites by preceramic polymer pyrolysis (opens in a new tab)

  7. Processing and characterization of nanoparticle and carbon nanotube reinforced continuous fiber ceramic nanocomposites by preceramic polymer pyrolysis

    In this work, two types of Continuous Fiber Ceramic Composites (CFCCs) were manufactured using preceramic polymer pyrolysis (PIP) method for mechanical testing. Nicalon™ ceramic grade silicon carbide fiber was used as the reinforcements, and KiON CERASET® preceramic polymer was used as the matrix …

    hawaii Repository record for Processing and characterization of nanoparticle and carbon nanotube reinforced continuous fiber ceramic nanocomposites by preceramic polymer pyrolysis (opens in a new tab)

  8. DYNAMICS AND HAZARDS OF CASCADING FAILURE IN LITHIUM ION CELL ARRAYS: ANALYSIS, PASSIVE MITIGATION, AND ACTIVE SUPPRESSION

    … gaps, were investigated. Among the barriers, ceramic fiber board was found to be the most effective, slowing down the propagation by more than a factor of 30. Lastly, the effectiveness of two fire extinguishing agents, Novec1230 and water mist, was investigated. Applying Novec1230 agent at …

    maryland Repository record for DYNAMICS AND HAZARDS OF CASCADING FAILURE IN LITHIUM ION CELL ARRAYS: ANALYSIS, PASSIVE MITIGATION, AND ACTIVE SUPPRESSION (opens in a new tab)

  9. Thermal transport and thermal structural domain in microfibers

    <p>Microfibers have been playing a fundamental role in heat dissipation in composite structures like fiber-reinforced polymer and ceramic matrix composite. The growth of industrial application calls out a demand for experimental investigation on thermal properties and structure of microfibers for …

    iastate Repository record for Thermal transport and thermal structural domain in microfibers (opens in a new tab)

  10. Glass and Jute fibers modified with CNT-based functional coatings for high performance composites

    … them. Polymers can be efficiently reinforced by fibers for applications where high strength and stiffness are required. Micro-scale short fiber reinforced polymer composites have been an alternative way to obtain fiber reinforced composites since the long fiber incorporation is a painful job and …

    qucosa-diss

  11. Role of electric field profiles in continuous microwave processing of thermal runaway materials

    … appears as a good alternative for sintering ceramics by decreasing the process time, offering better energy efficiency, but also diminishing thermal gradients inside the materials, producing more uniform heating, and therefore better mechanical properties. However, the strong temperature …

    vt Repository record for Role of electric field profiles in continuous microwave processing of thermal runaway materials (opens in a new tab)

  12. Mechanical Characterization of SICF-SICM Nuclear Fuel Cladding by a Novel Hydraulic Internal Pressurization Method

    Ceramic Matrix Composites (CMC) have been actively researched for applications requiring high temperature strength and damage tolerance. Examples are turbine engine hot section components, leading edges for hypersonic vehicles, nuclear fusion reactor first wall and blanket, and recently nuclear …

    south-carolina Repository record for Mechanical Characterization of SICF-SICM Nuclear Fuel Cladding by a Novel Hydraulic Internal Pressurization Method (opens in a new tab)

  13. Mechanical Characterization and Non-Destructive Evaluation of SiCF-SiCM Composite Tubing with the Impulse Excitation Technique

    With growing interest on ceramic fiber reinforced ceramic matrix composites (CMC) for accident tolerant fuel, the need for mechanical characterization of ceramic composite arises. It has been of particular interest to non-destructively evaluate the mechanical performance of these composites. …

    south-carolina Repository record for Mechanical Characterization and Non-Destructive Evaluation of SiCF-SiCM Composite Tubing with the Impulse Excitation Technique (opens in a new tab)