Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 33 for “"ceramic foam"”.

  1. Removal of non-metallic inclusions from molten steel by ceramic foam filtration

    ”Ceramic filters are routinely used in steel foundries to remove non-metallic inclusions from steel melt. Removal efficiency for both solid and liquid inclusions by magnesia-stabilized zirconia foam filters (10ppi) were evaluated and distribution of the captured inclusions through the filter …

    must-thes Repository record for Removal of non-metallic inclusions from molten steel by ceramic foam filtration (opens in a new tab)

  2. Functionalization of carbon-bonded ceramic foam filters with nano-scaled materials for steel melt filtration

    … of special reactive coatings on carbon-bonded ceramic foam filters was explored. Carbon nanotubes were dispersed in water by means of ultrasonic treatment, using xanthan gum to stabilize the nanotubes in suspension and control the rheological behavior. The coatings were applied by cold spraying …

    qucosa-diss

  3. Comparison of reticulated ceramic foam to packed bed porous media reactors for conversion of methane to hydrogen

    … fuel reforming characteristics of a reticulated ceramic reactor to a packed bed reactor through experimental and computational analysis. The reticulated ceramic reactor consisted of 3.9 pores per centimeter (ppc) yttria stabilized zirconia (YZA) and the packed bed reactor consisted of 3 mm …

    texas Repository record for Comparison of reticulated ceramic foam to packed bed porous media reactors for conversion of methane to hydrogen (opens in a new tab) Restricted access

  4. A Compact and Efficient Steam Methane Reformer for Hydrogen Production

    … (1) Catalyzed steam-methane reforming on ceramic foam catalyst substrates. (2) Coupling of reformers to remote heat sources via heat pipes instead of heating by direct-fired heaters. (3) Catalytic combustion of methane with air on ceramic foam substrates as the heat source. Each of these …

    houston Repository record for A Compact and Efficient Steam Methane Reformer for Hydrogen Production (opens in a new tab)

  5. Structure-Property Relationships of Tantalum Carbide Foams and Synthesis of an Interpenetrating Phase Composite

    Ceramic and refractory metal foams have a potential for use in extreme environments, such as in fuel elements within nuclear reactors both in space and terrestrial applications. In addition, infiltrating an open-cell ceramic foam with a continuous second phase can create an interpenetrating phase …

    vt Repository record for Structure-Property Relationships of Tantalum Carbide Foams and Synthesis of an Interpenetrating Phase Composite (opens in a new tab)

  6. An investigation into the removal of oxide films from molten A20X with the use of rotary impellor degassing

    … in turn their effect of the flow of A20X through ceramic foam filters. Oxide films have been shown to restrict metal flow through filters placed in running systems of castings causing incomplete and unpredictable filling of the mould cavity. It was found that increasing the rotor speed and …

    birmingham Download PDF for An investigation into the removal of oxide films from molten A20X with the use of rotary impellor degassing (opens in a new tab)

  7. Positron emission particle tracking of inclusions in cast liquid metals

    … process was also achieved. The effectiveness of ceramic foam filters was studied, the proportion of particles which passed through filters with pore sizes ranging from 10 to 30ppi was shown. The passage of inclusions through an open topped launder was also physically studied; A new geometry for a …

    birmingham Download PDF for Positron emission particle tracking of inclusions in cast liquid metals (opens in a new tab)

  8. Processing and properties of bulk and cellular carbon-bonded refractory materials

    … cold crushing strength of carbon-bonded alumina foam filters; Geometric characterization of ceramic foam filters as a tool to understand processing parameters; Use of advanced techniques such as computer tomography and finite element modelling to correlate processing parameters and mechanical …

    qucosa-diss

  9. Off Axis Compressive Response of Ice-Templated Ceramics

    … off-axis compressive behavior of ice-templated ceramic was analyzed using experimental results and micro-mechanical model simulation. Ice-templated ceramics is a versatile processing technique used to manufacture anisotropic ceramic foam by exploiting the anisotropic growth characteristics and …

    odu Repository record for Off Axis Compressive Response of Ice-Templated Ceramics (opens in a new tab)

  10. High performance digital volume correlation

    … deformations of 3D micro-CT scans of polymer and ceramic foam samples.

    uiuc Repository record for High performance digital volume correlation (opens in a new tab)

  11. Passive mitigation of combustion noise and thermo-acoustic instability using porous inert media at elevated pressure

    … a swirl-stabilized, lean-premixed combustor. The foam insert reduces turbulent intensities within the inner and outer recirculation zones of a common swirl-stabilized burner, thus reducing the amplitude of combustion driven instabilities. Experiments are conducted at high pressures, with high …

    alabama Repository record for Passive mitigation of combustion noise and thermo-acoustic instability using porous inert media at elevated pressure (opens in a new tab)

  12. Fundamental development of a thermophotovoltaic device using porous media combustion

    … zirconia/alumina composite (YZA) ceramic foam (both erbia-coated and uncoated). A low-cost erbia (Er2O3) coating on a novel porous media combustion-based thermophotovoltaic (PMC-TPV) reactor was shown to achieve continuous combined heat and power generation. The results indicate …

    unsw Repository record for Fundamental development of a thermophotovoltaic device using porous media combustion (opens in a new tab)

  13. High density animal cell culture systems using porous supports

    Monolithic porous ceramic and porous polystyrene microcarriers were examined as supports for large scale mammalian cell culture. Vero cells and transformed baby hamster kidney (BHK) cells which produced human transferrin were grown in three different reactor configurations: a fixed bed ceramic …

    ubc Repository record for High density animal cell culture systems using porous supports (opens in a new tab) Download PDF for High density animal cell culture systems using porous supports (opens in a new tab)

  14. Design of porous medium burners by means of additive manufacturing

    The stochastic morphology of ceramic foams and discrepancies between specimens of the same type complicate the creation of numerical models during the design and optimization of porous medium burners. A favourable solution, from the modelling point of view, is the application of an ordered diamond …

    ets-quebec Download PDF for Design of porous medium burners by means of additive manufacturing (opens in a new tab)

  15. Transport and Chemical Phenomena in a Solar Thermochemical Reactor to Split Carbon Dioxide and Water to Produce Synthesis Gas

    … gas phase heat recuperation, a counterflow, ceramic heat exchanger filled with alumina reticulated porous ceramic was designed to operate at 1773 K. The focus of the modeling was selection of the morphology of the reticulated porous ceramic/ foam to balance heat transfer and pressure drop. …

    umn Repository record for Transport and Chemical Phenomena in a Solar Thermochemical Reactor to Split Carbon Dioxide and Water to Produce Synthesis Gas (opens in a new tab)

  16. Organic-inorganic hybrid materials for boron removal from aqueous media

    … chapter exposes the results obtained by using a ceramic foam as macroscopic support for active materials for boron removal. This support is previously "impregnated" with an inorganic silica mesoporous material (UVM-7) and, in a second step, it is functionalized with an organic group with high …

    upv Repository record for Organic-inorganic hybrid materials for boron removal from aqueous media (opens in a new tab)

  17. Development of active and reactive carbon bonded filter materials for steel melt filtration

    Kohlenstoffgebundene Filterwerkstoffe erfreuen sich stetig wachsender Beliebtheit seitens der Industrie. Deren Potenzial hinsichtlich stofflicher und verfahrenstechnischer Eigenschaften erscheint dennoch nicht in vollem Umfang genutzt. Daher wurden im Rahmen der vorliegenden Arbeit, welche …

    qucosa-diss

  18. Synthesis and Characterization of Thermally Insulating Silica-Alumina Foams

    … is on developing a new class of silica-alumina foams (SAF) for thermal insulation applications. Specifically, using earth-abundant materials such as quartz and corundum powders as precursors, a simple, but effective low energy direct foaming based method for synthesis of thermally insulating …

    arizona-thes Repository record for Synthesis and Characterization of Thermally Insulating Silica-Alumina Foams (opens in a new tab)

  19. Análise do comportamento mecânico de espumas cerâmicas a base de alumina obtidas pelo método da réplica

    Ceramics with porous cellular structure, called ceramic foams, have a potential use in several applications, such as: thermal insulation, catalyst supports, filters, and others. Among these techniques to obtain porous ceramics the replication method is an important process. This method consists of …

    brazil-ufrn Repository record for Análise do comportamento mecânico de espumas cerâmicas a base de alumina obtidas pelo método da réplica (opens in a new tab)

Page 1 of 2