Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 40 for “"ceramic processing"”.
-
Ceramic processing of magnesium diboride
… is little consensus in the literature on the processing requirements to produce high quality MgB<sub>2</sub> material with low impurity content and high density. In this work, the key parameters in the production of dense ex situ MgB<sub>2</sub> produced from Alfa Aesar MgB<sub>2</sub> powder …
-
An Experimental and theoretical study on piezoelectric ceramic processing
… and vise versa. In recent years, piezoelectric ceramics have gained great importance in high precision actuating and sensing applications. As a part of the IRIS (MSA-6) project, this research is aimed at building an understanding of these materials as well as their processing and …
-
An integrated study of the ceramic processing of yttria
<p>The preparation of a yttria ceramic, beginning with the continuous precipitation of a yttrium hydroxynitrate precursor by the reaction between yttrium nitrate and ammonium hydroxide, was studied to find the interrelationships among the various processing steps. Emphasis was placed on the effect …
-
Synergistic effects of vapor transport and combustion synthesis in ceramic processing
Includes bibliographical references.
-
Ceramic processing of a garnet-based superionic conducting oxide : lithium lanthanum zirconium aluminate
… temperature, pressure, and chemical composition. Ceramic powder processing optimization of the sintering temperature and sintering mechanism has been shown here to increase the density as well as the Li-ion conductivity in the garnet-based SCO electrolyte …
-
Enhancing protonic ceramic electrochemical cell performance through ceramic processing, electrolyte, and air electrode materials design
… costs, and rapid material degradation. Protonic ceramic electrochemical cells (PCCs) can potentially address these limitations by operating at lower temperatures (400–600 °C). While encouraging, PCCs are at a relatively early stage of technological development in comparison to their solid-oxide …
-
An inverse gas-solid chromatographic study of the adsorption heterogeneity of aluminum oxide powders used in ceramic processing
<p>Ceramic processing suffers from a paucity of information regarding the exact chemical nature of the surface of the raw material powders. Different lots powder (e.g. alumina), when used in the same process, may result in ceramics having vastly differing properties. A rapid, accurate method of …
-
Application of Novel Materials and Radio Frequency Field Assisted Heating to Enable Out-of-oven Ceramic Processing and Chemical Manufacturing.
… and investigates this hypothesis in ceramic and chemical manufacturing setting. For enabling out-of-oven ceramic manufacturing, we have studied two RF susceptors: (a) Multiwalled carbon nanotubes and (b) Silicon carbide (SiC) fibers. (a) The addition of multiwalled carbon nanotubes …
-
TUNING THE STRUCTURE AND CHEMISTRY OF SOLID OXIDE FUEL CELL ELECTRODES FOR HIGH PERFORMANCE AND STABLE OPERATION
… potential of SOFCs on a cell level. Furthermore, ceramic processing challenges hinder the large-scale implementation of SOFCs. Here, SOFC electrodes are redesigned to develop the device closer to its theoretical potential. First, a fundamental investigation into the nature of exsolution materials …
-
Air plasma spraying of copper-based SOFC anodes for direct oxidation of hydrocarbon fuels
… these anodes are manufactured by multi-step wet ceramic processes, which makes them difficult to produce economically at moderate volumes. In contrast to wet ceramic processing, APS allows rapid, easy-to-automate processing and easy scale-up to mass production of SOFCs. The main challenge in …
-
Influence of architecture, materials, and processing on low temperature solid oxide fuel cell (LT-SOFC) performance
… structure has been adopted, fabricated by wet ceramic processing and co-firing. Sm₀.₂Ce₀.₈O₁.₉ (SDC) electrolyte cells supported by Ni-Y₀.₁₀Zr₀.₈₄O₁₉₂ (YSZ) cermet substrates, with Sm₀.₅Sr₀.₅CoO₃ cathode and Ni-SDC anode, demonstrate a high performance of 0.89 W cm⁻² at 600°C. A designed …
-
Spark plasma sintering of cerium dioxide and its composites
Cerium dioxide (CeO₂) is an important electroceramic material with a wide array of applications in the fuel cell industry. Recently, cerium dioxide was also found to have similar thermophysical properties as common nuclear fuel materials such as uranium dioxide, thorium dioxide and plutonium …
-
Processing-Structure Relationships of Reactive Spark Plasma Sintered Diamond Composites
Traditional lightweight armor ceramics such as boron carbide (B4C) and silicon carbide (SiC) are used alone or together in varying amounts to create monolithic protective plates. These materials exhibit relatively small differences in hardness, flexure strength, and fracture toughness. Many of the …
-
Barium Based Halide Scintillator Ceramics For Gamma Ray Detection
As our understanding of ceramic processing methods for the purpose of fabricating polycrystalline optical materials has increased over the past few decades, the race is on to bring ceramic technology to markets where single crystalline materials have traditionally been used. One such market is …
-
Electronic Properties And Microstructures Of Amorphous Sicn Ceramics Derived From Polymer Precursors
Polymer-derived ceramics (PDCs) are a new class of high-temperature materials synthesized by thermal decomposition of polymeric precursors. These materials possess many unique features as compared with conventional ceramics synthesized by powder metallurgy based processing. For example, PDCs are …
-
Stress-induced Phase Change Sintering: A Novel Approach to the Fabrication of Barium Chloride Transparent Ceramic Scintillators
… community to investigate new compounds and processing techniques. One particular solution is Eu:BaCl2 transparent ceramics processed by the novel phase-change sintering technique. Typically, optical transparency in BaCl2 would be limited by birefringence scattering at grain boundaries due to …
-
Examining ablation efficiency in alumina ceramics utilizing femtosecond laser with mhz/ghz burst regime /
Ceramics are a popular material used in many fields: medicine, the automotive industry, the electronics industry, and others. Ceramic processing commonly involves mechanical processes such as milling, drilling, and cutting. Unfortunately, mechanical processing has several drawbacks: tool wear, …
-
Chemical Precipitation Techniques for the Production of Ceramics with Controlled Microstructure
… process is critical to the production of ceramics for advanced technological applications. In many cases, conventional ceramic processing techniques are inadequate for achieving the required level of microstructural control. In the present work, chemical precipitation techniques were …
-
Polymer Derived Silicon Carbide Ceramics for Nuclear Applications
… more radiation damage tolerant. Polymer derived ceramics (PDCs) provide a unique route to develop SiC ceramics with nanostructural features that can help mitigate radiation defects. A novel class of SiC ceramics with controlled microstructures has been developed through tailoring of the molecular …
-
The effect of oxide impurities on the microstructure and properties of Y-T.Z.P.
… process could be exploited to solve a variety of ceramic processing problems. The results obtained from impurity doped materials showed that alumina and silica reduced the sintering temperature and promoted enhanced densification at lower sintering temperatures, whilst titania impaired the …
Page 1 of 2