Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 50 for “"characterization methodology"”.
-
Process capability analysis using Motorola's six sigma characterization methodology
Master of Science (M.S.)
-
Development of Crack Characterization Methodology Using Digital Image Correlation
… paper presents a digital image correlation-based methodology developed from in-plane compact fracture specimens for the detection and quantification of fatigue cracks. The effectiveness of the proposed methodology is further evaluated through experimental tests of a fatigue crack on a large-scale …
-
Application of a subnetwork characterization methodology for dynamic traffic assignment
The focus of this dissertation is a methodology to select an appropriate subnetwork from a large urban transportation network that experiences changes to a small fraction of the whole network. Subnetwork selection techniques are most effective when using a regional dynamic traffic assignment model. …
-
Novel Similarity Level Characterization Methodology Informed by CFD for RCIC System Scaling
… system turbomachinery and Suppression Pool. The methodology is demonstrated with the Texas A&M University facility but can be applied to other RCIC system facilities. With respect to any full-scale RCIC system, upon availability of data from a full-scale system of interest, the scaling Similarity …
-
Characterization Methodology, Modeling, and Converter Design for 600 V Enhancement-Mode GaN FETs
… to potential GaN-based converter designers.Methodology for experimentally characterizing a GaN FET was also presented, including static characterization with a curve tracer and impedance analyzer, as well as dynamic characterization in a double pulse test setup. This methodology was …
-
Waste characterization methodology for determining the concentration of radionuclides in radioactive and mixed waste, A
Includes bibliographical references.
-
Characterization Methodology for Decommissioning Low and Intermediate Level Fissile Nuclide Contaminated Buried Soils and Process Piping Using Photon Counting
A new approach to- and method for characterization of fissile nuclide contaminated soils and process piping has been developed and implemented for low and intermediate level wastes, using new calibration bases for photon counting. The method has been validated by integrating the capabilities of …
-
Towards Understanding an Imperfect Built Environment: A Methodology for In-Situ Characterization of Building Envelope Thermal Performance
… in in-situ thermal testing, a thermal characterization methodology to non-destructively identify representative thermal properties for existing building envelopes, a simulation-based study to verify the thermal characterization method, two physical experiments to validate the thermal …
-
Multi-modal Global Surveillance Methodology for Predictive and On-Demand Characterization of Localized Processes Using Cube Satellite Platforms
… analytics capabilities can create an autonomous characterization surveillance method for the phenomena of interest. CubeSats are advantageous over conventional satellites for remote monitoring because of their reduced costs and higher simplicity due to the availability of …
-
Design and Development of Compact Multiphoton Microscopes
… the optical design software: Zemax. A novel characterization methodology based on 'nonlinear knife-edge' technique was also introduced to measure the axial, lateral resolution, and the field curvature of the multi-photon microscope's image plane. The field curvature was then post-corrected …
-
Classificação e resistência de juntas rochosas sãs e alteradas
… joints. Thus, it is necessary to develop a joint characterization methodology, in order to help the determination of joint strength parameters. The main objective of this research is to develop a joint characterization and classification system focusing on its strength, aiming a better …
-
Combinatorial and High Throughput Screening of Electrocatalysts for the Oxygen Reduction Reaction in Alkaline Fuel Cells
… catalytic activity is low efficient. The screen methodology is a combination study of thin film fabrication and electrochemistry where magnetron plasma sputtering has been applied for sample preparation and rotating disk electrode plays an important role in the characterization methodology. The …
-
Advanced Kernel-Based NMR Cryoporometry Characterization of Mesoporous Solids
… NMR Cryoporometry toolbox for pore architecture characterization. The dissertation contains five chapters. The first introduces porous materials, their types and applications. Chapter two describes the fundamentals of fluid phase equilibria in mesoporous solids and how modifications of the …
-
Graphene Quantum Capacitance Varactors
… over a voltage range of ±2 V. A characterization methodology was developed to serves as a diagnostic process to ascertain graphene varactor limitations and capabilities. Since functionalization of graphene is needed to sense variety of target analytes, the material and electrical …
-
Dynamic Characterization of Wide Bandgap Devices for Power Electronic System Integration
… Therefore, this dissertation presents novel characterization methods, measurement techniques, and analytical frameworks to investigate dynamic switching stresses in WBG devices and the integration strategies to optimize power electronic system performance. The key state-of-the-art challenges …
-
Characterization of the Performance Variation for Regular Standard Cells with Process Non-idealities
… non-idealities. Some research work on 2-D cell characterization shows that the timing variations can be characterized by the timing model. However, as regular design rules become necessary in sub-45 nm node circuit design, 1-D design has shown its advantages and has drawn intensive research …
-
High Accuracy Thermal Characterization and Process Improvement for 3d-Printed Continuous Pitch Carbon Fibers
… to these discrepancies. First, a new fiber characterization methodology was established, comparing traditional microscopy with pycnometry to accurately determine the cross-sectional area and volume fraction of K13D2U fiber tows within the composites. Second, a high-accuracy thermal …
-
FABRICATION AND CHARACTERIZATION OF METAMATERIAL-BASED TERAHERTZ FOCAL PLANE ARRAY
… was to fabricate the TIC 2.1 FPA and develop a methodology to characterize its performance. The converters are fabricated using micro-electromechanical systems (MEMS) methods and metamaterials. They are designed as a focal plane array (FPA), absorbing THz on one side and emitting IR on the …
-
On the Manufacturability and Failure of Additively Manufactured Lattices
… in this dissertation. A high-throughput geometry characterization methodology was developed using computed tomography (CT) and advanced image processing techniques for the creation of models relating manufacturing variables to strut geometry. The resulting models provided insight into the physical …
-
Diseño y caracterización de dispositivos codificadores y decodificadores para sistemas OCDMA Coherentes
[EN] In this thesis we propose the design and characterization of advanced optical de- vices used in coherent direct sequence optical en/decoding, also called temporal phase en/decoding, based on SSFBGs (Super-Structured Fiber Bragg Grating). The aim of this thesis is to enhance the overall …
Page 1 of 3