Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 115 for “"chip formation"”.

  1. Chip formation and chip breaking processes in metal cutting

    … has been carried out to analyse and discuss the chip formation and chip breaking processes in metal cutting and to demonstrate the degree of agreement between the theoretical and experimental results. Particular attention has been given to the chip breaking control. Different materials such as …

    whiterose Download PDF for Chip formation and chip breaking processes in metal cutting (opens in a new tab)

  2. Ale simulation of chip formation in orthogonal metal cutting process

    … (ALE) finite element analysis in simulation of chip formation in orthogonal metal cutting process. A critical review of the literature in this field shows that due to the very complex set of conditions present in a cutting process, the application of conventional Lagrangian and Eulerian methods …

    ubc Repository record for Ale simulation of chip formation in orthogonal metal cutting process (opens in a new tab) Download PDF for Ale simulation of chip formation in orthogonal metal cutting process (opens in a new tab)

  3. Modeling of chip formation mechanism in machining carbon fiber reinforced polymer

    … drilling are necessary. A mechanics model of the chip formation is developed to investigate the buckling failure mode, which occurs at 0° fiber orientation, by dividing the chip formation into shearing and buckling processes. The chip length increases owing to the shear failure in the interface …

    ubc Repository record for Modeling of chip formation mechanism in machining carbon fiber reinforced polymer (opens in a new tab) Download PDF for Modeling of chip formation mechanism in machining carbon fiber reinforced polymer (opens in a new tab)

  4. Finite element analysis of chip formation in grooved tool metal cutting

    … using the finite element method to predict chip formation in grooved tool cutting. A flat-faced cutting tool is first simulated to check the validity of the model, and the results obtained are used as a basis for comparison in grooved tool cutting simulation. Grooved tool simulations are …

    iastate Repository record for Finite element analysis of chip formation in grooved tool metal cutting (opens in a new tab)

  5. Experimental and Theoretical Aspects of High Speed Chip Formation in Metals

    Made available in DSpace on 2014-12-05T19:16:01Z (GMT). No. of bitstreams: 1 6202987.pdf: 3438962 bytes, checksum: 83ecc6c8a41a784ae194cc901fa55f82 (MD5) Previous issue date: 1962

    uiuc Repository record for Experimental and Theoretical Aspects of High Speed Chip Formation in Metals (opens in a new tab)

  6. Micro chip formation mechanism in grinding of Nickel-base superalloy-Inconel 718

    Nickelbasis Superlegierungen werden aufgrund ihrer hervorragenden Eigenschaften in Hochtemperatur- und korrosiven Umgebungen und in der Luftfahrt- und Raumfahrtindustrie als strategische Werkstoffe angesehen. Ihre hervorragenden mechanischen Eigenschaften hingegen reduzieren ihre Schleifbarkeit …

    freiburg-diss Repository record for Micro chip formation mechanism in grinding of Nickel-base superalloy-Inconel 718 (opens in a new tab)

  7. 3-D chip formation of a turning machine in a virtual environment

    … reality (VR) system. The 3-D animation models of chip formation and machining operations integrate chip flow equations, chip curling patterns, chip geometric mathematical expression for 3-D helix surface, and machine design. The variables of the machining process that can be controlled in the …

    iastate Repository record for 3-D chip formation of a turning machine in a virtual environment (opens in a new tab)

  8. Chip Formation and Surface Integrity in High Speed Machining of Hardened Steel

    … by the generation of high temperatures the formation of saw toothed chips, and the high ratio of thrust to tangential cutting force components. Although a large volume of literature exists on hard turning, the change in machined surface physical properties represents a major challenge. Thus, …

    mcmaster Repository record for Chip Formation and Surface Integrity in High Speed Machining of Hardened Steel (opens in a new tab)

  9. Chip formation and metal cutting performance when using non-plane rake face tools

    Previously published work on the mechanics of chip breaking, the performance of chip forming devices and cutting with controlled contact length cutting tools is critically appraised and the need for a greater understanding of the chip control process is established. Machining with tools having chip …

    city-london Download PDF for Chip formation and metal cutting performance when using non-plane rake face tools (opens in a new tab)

  10. Dynamics of Orthogonal Chip Formation With Constant Energy Input (Appliedto 65/35 Brass, t.p.e. Copper and 6061-T6 Aluminum)

    Made available in DSpace on 2014-12-10T22:48:10Z (GMT). No. of bitstreams: 1 7114911.pdf: 4168702 bytes, checksum: 86db5157f8b2097c017e59e120e00727 (MD5) Previous issue date: 1970

    uiuc Repository record for Dynamics of Orthogonal Chip Formation With Constant Energy Input (Appliedto 65/35 Brass, t.p.e. Copper and 6061-T6 Aluminum) (opens in a new tab)

  11. The Effects of Particle Reinforcements on Chip Formation and Machining Induced Damage in cutting of modified epoxy Carbon Fibre Reinforced Polymers

    … to better characterise the subsequent chip formation process and machining induced damage in cutting of epoxy modified carbon fibre reinforced polymers. This is completed through a series of experimental studies which will facilitate the in-situ observations of material removal …

    whiterose Download PDF for The Effects of Particle Reinforcements on Chip Formation and Machining Induced Damage in cutting of modified epoxy Carbon Fibre Reinforced Polymers (opens in a new tab)

  12. Microstructure -Level Machining Modeling of Ferrous Alloys

    … conducted of the three materials. The measured chip morphology and machining forces were compared with the model predictions, and a good correlation between them was found. In addition, the microstructure-level model explained chip formation mechanisms and relationship between chip formation and …

    uiuc Repository record for Microstructure -Level Machining Modeling of Ferrous Alloys (opens in a new tab)

  13. Mechanics of machining zirconium-based bulk metallic glass

    … In the machining of BMGs, inhomogeneous deformation and shear localization occur, which are influenced by the temperature and free volume in the deformation zone. Understanding the mechanics of machining BMGs is essential to improve the machining efficiency and surface quality. In this …

    ubc Repository record for Mechanics of machining zirconium-based bulk metallic glass (opens in a new tab) Download PDF for Mechanics of machining zirconium-based bulk metallic glass (opens in a new tab)

  14. A generalized approach for mechanics of chip formation in steady-state and dynamic orthogonal metal cutting using a new model of shear zone with parallel boundaries and its validation to cutting-forces prediction in self-piloting machining

    … presents a novel approach to the mechanics of chip formation based on a shear zone model with parallel boundaries that has been developed by applying the continuum mechanics to the analysis of the chip formation process. Such a model is formulated without imposing the assumptions commonly made …

    concordia Download PDF for A generalized approach for mechanics of chip formation in steady-state and dynamic orthogonal metal cutting using a new model of shear zone with parallel boundaries and its validation to cutting-forces prediction in self-piloting machining (opens in a new tab)

  15. Numerical modeling of orthogonal cutting of carbon fibre reinforced polymer composites

    … cutting of composites, cutting forces, chip formation mechanism and the extent of damage below the cutting plane are highly dependent on the fibre orientation. With fibre orientation increasing from 0° to 90°, cutting forces tend to increase and chips become more dust-like. Two modeling …

    ubc Repository record for Numerical modeling of orthogonal cutting of carbon fibre reinforced polymer composites (opens in a new tab) Download PDF for Numerical modeling of orthogonal cutting of carbon fibre reinforced polymer composites (opens in a new tab)

  16. Machinability of stainless steel alloys

    … on the surface roughness, cutting forces, burr formation and chip formation. A great emphasis is put on the materials interactions with the machining process. For these machining tests, specimens were machined under different cutting parameters using the same tool in order to develop a global …

    ets-quebec Download PDF for Machinability of stainless steel alloys (opens in a new tab)

Page 1 of 6