Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 85 for “"circulating current"”.

  1. ANALYSIS AND CONTROL OF CIRCULATING CURRENT IN MODULAR MULTILEVEL CONVERTER

    … for high voltage and high power applications. Circulating current harmonics and the substantial size of its submodule capacitors are the critical issues in MMC. In this thesis, a new control architecture comprising of spatial comb filter (SCF) and spatial repetitive controller (SRC) is proposed …

    nus Repository record for ANALYSIS AND CONTROL OF CIRCULATING CURRENT IN MODULAR MULTILEVEL CONVERTER (opens in a new tab) Download file for ANALYSIS AND CONTROL OF CIRCULATING CURRENT IN MODULAR MULTILEVEL CONVERTER (opens in a new tab)

  2. Pulse Width Modulation-Based Voltage Balancing and Circulating Current Control for Modular Multilevel Converters

    … common MMC configurations result in additional current paths that are not desirable in a normal operation referred to as circulating currents. Methods for voltage balancing are in some cases combined with modulation techniques used for the switching control in each SM, however, circulating …

    south-carolina Repository record for Pulse Width Modulation-Based Voltage Balancing and Circulating Current Control for Modular Multilevel Converters (opens in a new tab)

  3. A hybrid, half-bridge, modular multilevel converter circulating current controller for use in inertia deficient power systems

    … supports various active power/load imbalances. Circulating currents in the MMC, which are traditionally eliminated, are injected into the arms of the MMC to manipulate the peaks of the arm currents. The maximum power controller flattens these peaks, allowing the MMC to be overloaded (by 27.5% in …

    manitoba Repository record for A hybrid, half-bridge, modular multilevel converter circulating current controller for use in inertia deficient power systems (opens in a new tab)

  4. Modeling, analysis, and control of circulating currents in half-bridge modular multilevel converters

    … (MMCs) the common practice is to eliminate circulating currents using a Circulating Current Suppression Controller (CCSC). This practice reduces converter losses and submodule capacitor voltage ripple; it also allows usage of semiconductors with lower ratings. Although preliminary research …

    manitoba Repository record for Modeling, analysis, and control of circulating currents in half-bridge modular multilevel converters (opens in a new tab)

  5. Arm Inductance and Sub-module Capacitance Selection in Modular Multilevel Converter

    … <p>Arm inductors in MMC are used to limit the circulating current which flows within the converter. The switching frequency harmonic is found to be the dominant component in the circulating current when an active circulating current suppressing controller is implemented. The analytical …

    ut-knoxville Repository record for Arm Inductance and Sub-module Capacitance Selection in Modular Multilevel Converter (opens in a new tab)

  6. Circulating and Eddy-Current Losses in Random-Wound Electrical Machines

    … electrical machines, with special attention on circulating currents in random-wound machines. Five methods are developed for computationally efficient analysis, including one analytical circuit model and four 2D finite element models. The circuit model, as well as two of the numerical models, …

    aalto Repository record for Circulating and Eddy-Current Losses in Random-Wound Electrical Machines (opens in a new tab)

  7. Modular and scalable DC-DC converters for medium-/high-power applications

    … years, advanced MVDC (medium-voltage direct-current) and HVDC (high-voltage direct-current) power collection and transmission are becoming increasingly important in power systems. As the DC grids evolve, the interconnection of DC grids will become essential in the future. A DC-DC converter …

    gatech Repository record for Modular and scalable DC-DC converters for medium-/high-power applications (opens in a new tab)

  8. Phase shift modulation in bidirectional resonant CLLC chargers

    … of improving efficiency and achieving robust current balancing in bidirectional battery-charging applications. The research addresses two fundamental challenges associated with CLLC-based electric vehicle (EV) chargers: (i) efficiency degradation under light-load operation due to excessive …

    ubc Repository record for Phase shift modulation in bidirectional resonant CLLC chargers (opens in a new tab) Download PDF for Phase shift modulation in bidirectional resonant CLLC chargers (opens in a new tab)

  9. High-frequency, slotless permanent magnet synchronous motor for aircraft propulsion

    … structure contributes to the increase in circulating current in the armature coils. The aforementioned analytical model is used to predict the imbalance in back-EMF and thus the circulating current due to the manufacturing tolerances, and a low- field rotor is constructed to verify the …

    uiuc Repository record for High-frequency, slotless permanent magnet synchronous motor for aircraft propulsion (opens in a new tab)

  10. Study on Three-level DC/DC Converter with Coupled Inductors

    … phased legs offer the benefit of output current ripple reduction, while inversed coupled inductors can suppress the circulating current between phase legs. Compared with conventional non-interleaving three-level DC/DC converter with non-coupling inductors, both inductor current ripple and …

    vt Repository record for Study on Three-level DC/DC Converter with Coupled Inductors (opens in a new tab)

  11. Controle preditivo com número reduzido de estados aplicado a conversor multinível modular

    … been studied, especially in high voltage direct current transmission systems. Thus, this work describes the MMC converter model, considering both half and full-bridge submodules, associated with a model predictive control strategy, which considers a reduced number of states to control the power …

    brazil-uerj Repository record for Controle preditivo com número reduzido de estados aplicado a conversor multinível modular (opens in a new tab)

  12. Modulation and control of modular multilevel converters

    … with control and modulation of the MMC. Circulating current and sub-modules capacitor voltage balancing have significant impact on the rating of the power devices, losses and capacitor voltage ripples. The above, together with the requirement for relatively low switching frequencies pose …

    unsw Repository record for Modulation and control of modular multilevel converters (opens in a new tab)

  13. Performance Analysis and Grid Interaction Studies of Modular Multilevel Converters

    … interactions between the MMCs and grid. Circulating current control schemes regulate the internal circulating current and shape MMC sequence admittances. Injecting second-harmonic circulating current based on the instantaneous information can reduce the capacitor voltage ripples but …

    unsw Repository record for Performance Analysis and Grid Interaction Studies of Modular Multilevel Converters (opens in a new tab)

  14. Analysis and design of an auxiliary commutated full bridge DC/DC converter for low voltage and high current applications

    … but can be effectively used in minimizing the circulating current of the auxiliary commutation circuit used for achieving ZVS. The operating principle of the circuit is demonstrated, and the steady state analysis is performed. Based on the analysis, a criterion for optimal design is given.

    concordia Download PDF for Analysis and design of an auxiliary commutated full bridge DC/DC converter for low voltage and high current applications (opens in a new tab)

  15. Analysis and Control of VSC Based HVDC System under Single-Line-to-Ground Fault Conditions

    … extend its application in high voltage direct current (HVDC) transmission systems, the ability to deal with severe unbalanced conditions, especially under single-line-to-ground (SLG) fault, is a key requirement.</p> <p>This dissertation deals with the development of a fault handling strategy, …

    utk-theses Repository record for Analysis and Control of VSC Based HVDC System under Single-Line-to-Ground Fault Conditions (opens in a new tab)

  16. ROEBEL WINDINGS FOR HYDRO GENERATORS

    … in order to suppress losses caused by eddy currents and circulating currents. As the generator reaches high power density, circulating currents in the armature winding are large, and hence the loss must be estimated accurately in generator design. Calculation of such losses requires the …

    chalmers Repository record for ROEBEL WINDINGS FOR HYDRO GENERATORS (opens in a new tab)

  17. Zero-voltage switched resonant and PWM converters: design-oriented analysis and performance evaluation

    … Efficiency optimization requires minimizing the circulating currents which are directly proportional to the reactive energy required by the resonant tank. The comparison of the different converters is based on the reactive energy required for ZVS. The study considers resonant converters with …

    vt Repository record for Zero-voltage switched resonant and PWM converters: design-oriented analysis and performance evaluation (opens in a new tab)

  18. Design, Control and Protection of Modular Multilevel Converter (MMC)-Based Multi-Terminal HVDC System

    … based on the high voltage alternating current (HVAC) scheme, interests on high voltage direct current (HVDC) are growing rapidly during the past decade, due to the increased penetration of remote renewable energy. Voltage source converter (VSC) type is preferred over the traditional …

    utk-theses Repository record for Design, Control and Protection of Modular Multilevel Converter (MMC)-Based Multi-Terminal HVDC System (opens in a new tab)

  19. Investigations Into Real Time Control and Interconnection of Microgrid to Electric Power System

    … PCBB systems are proposed to minimize the circulating current, improve the system efficiency and expand system life span. A methodology to determine the architecture of the parallel inverter system in terms of reliability and cost optimization is proposed.

    nus Repository record for Investigations Into Real Time Control and Interconnection of Microgrid to Electric Power System (opens in a new tab) Download file for Investigations Into Real Time Control and Interconnection of Microgrid to Electric Power System (opens in a new tab)

Page 1 of 5