Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 405 for “"clad"”.
-
Stainless Clad Steels:An Evaluation
This work examines and evaluates stainless clad sheet steel. The history of clad materials is examined to put a following section on marketing in perspective. A section on marketing sees clad steels in competition with conventional stainless steel and coated mild steels, Following this a …
-
Nonlinear, metal-clad optical waveguide
… of films including nonlinear films with metal cladding have been studied theoretically. Ideal metal cladding with Ï = â and nonideal metal cladding with Ï â â, that is, with complex refractive index is considered to get electric field and wave number for TE<sub>0</sub> mode. For …
-
GLASS-CLAD SEMICONDUCTOR CORE OPTICAL FIBERS
Glass-clad optical fibers comprising a crystalline semiconductor core have garnered considerable recent attention for their potential utility as novel waveguides for applications in nonlinear optics, sensing, power delivery, and biomedicine. As research into these fibers has progressed, it has …
-
Seismic design of industrial rack clad buildings
Rack clad building (RCB) is a type of warehouse building system built using steel storage racks. Generally, these structures are larger and taller compared to regular storage racks commonly seen in superstores. These are built in a way that the peripheral frame can be used to support cladding. …
-
Chemical reactions at nuclear fuel-clad interfaces
… chemical reactions that may occur at the fuel- clad interfaces of fuel elements used in advanced gas-coooled reactors (A.G.R.) The initial investigation involved a study of the inner surfaces of irradiated stainless steel clad and evidence was obtained to show that fission products, in …
-
The Deformation Properties of Clad Sheet Metals
The techniques commonly used to produce clad sheet metals and the properties of these materials are reviewed. Experimental work is described for a range of two and three layer copper-steel composites produced by adhesive and roll bonding, the materials being processed to give a range of …
-
Understanding Defect Guidance in Kagome-Clad Structures
… of light within a defect in a kagome lattice cladding. With the aid of electromagnetic simulation we build and compare dispersion maps of select electromagnetic modes found within the hexagonal air-holes of the lattice and modes found in defects introduced into the lattice. Then, with the …
-
Clad thickness measurement using dual frequency eddy current
… eddy-current instrument for measuring the clad thickness of a conductor upon another conductor. The eddy-current instrumentation and measuring probe used were computer designed to minimize effects due to lift off and electrical conductivity (or resistivity) variations, and maximize the …
-
Strength and Stiffness of Metal-Clad Roof Sections
Post-frame timber construction has gained popularity with architects and designers in recent years because of design flexibility and cost effectiveness. Beside [sic] being economically feasible, improved strength and stiffness especially with the utilization of diaphragm action was achieved. The …
-
Hot rolling of stainless steel-steel clad system
Includes bibliographical references (pages 91-94).
-
Development and Application of 3-D Fuel Performance Modeling to Assess Missing Pellet Surface Influence on Pellet Clad Interaction and Clad Failure
… intended to reduce the stresses caused by pellet cladding contact. These ramp restrictions had a significant impact on Westinghouse fueled PWRs, reducing PCI related failure until 2003. Through investigation into these fuel rod failures lead to the conclusion that missing pellet surfaces (MPS) …
-
Development of air-clad holmium-doped silica fibre lasers
… focussed on the demonstration of the first air-clad holmium-doped silica fibre laser. Novel fabrication techniques were employed to directly drill air-claddings in preforms produced with modified chemical vapour deposition. Key limitations for increasing single-mode laser output powers are the …
-
Effective-Medium-Clad Dielectric Components Towards Terahertz Integrated Platform
… the effective medium theory. The effective-mediumclad dielectric waveguides are purely built into a high-resistivity intrinsic float-zone silicon wafer to achieve extremely low loss and low dispersion. The effective medium is realised by periodically perforating the silicon slab with a deep …
-
Two micron Tm doped ZBLAN double clad fibre laser.
… of new classes of fibre laser. A Tm:ZBLAN double clad fibre laser operating at 1.96 μm is demonstrated with a 1.53 W maximum output power and slope efficiency of 45% with respect to the launch pump power. Thereafter, the laser performance is analysed using cavity mirrors of various reflectivities. …
-
Feasibility of Producing Clad Twin Roll Cast (TRC) AZ31
… sheet alloys with the possible introduction of a clad layer during the TRC process thereby producing a laminate sheet where the surface properties are different from the core. The focus of this research was to investigate the potential of cladding magnesium alloy AZ31 material during the TRC …
-
Static Recovery of a Clad Aluminum Alloy After Cold Rolling
… examines the static recovery behaviour of a clad aluminum alloy manufactured by Novelis FusionTM technology after 72% cold rolling. The clad alloy system studied consisted of a core AA6XXX alloy clad on one side with AA3003. The Recovery at the inter-alloy region is compared with the recovery …
-
Reactor physics assessment of thick silicon carbide clad PWR fuels
… make silicon carbide (SiC) a potential fuel cladding material that may improve the economics and safety of light water reactors (LWRs). "Thick" SiC cladding (0.089 cm.) is easier (and thus more economical) to manufacture than SiC of conventional Zircaloy (Zr) classing thickness (0.05 cm.) …
-
Analysis and design of broadband single-mode multi-clad fibers
… achievement is that the proposed muIti-clad fiber design is strictly single-mode and splice and bend losses are smaller than those of double-clad, triple-clad, and quadruple-clad fibers with the same value of dispersion. Ultralow dispersion fibers, whose chromatic dispersion and the …
Page 1 of 21