Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 101 for “"class-E"”.

  1. Load-Independent Class-E Power Conversion

    The Class-E topology was presented as a single-switch power amplifier with high efficiency at the optimum condition, where the switch enjoys zero-voltage switching (ZVS) and zero-voltage-derivative switching (ZDS). It is also used in MHz dc-dc converters, and in inverters for wireless power …

    vt Repository record for Load-Independent Class-E Power Conversion (opens in a new tab)

  2. Class-E Current Source Power Conversion

    … to LED drivers. The load-independent (LI) Class-E inverter is a promising topology for such applications since it can realize zero-voltage switching (ZVS) within a wide load range. Class-E current source can be achieved by converting constant voltage (CV) Class-E inverter to current source …

    vt Repository record for Class-E Current Source Power Conversion (opens in a new tab)

  3. Class E switching model RF power amplifier

    The class E switching mode rf power amplifier has many advantages over previously developed power amplifiers. This thesis discusses the principles of operation, description, development, and performance of the amplifier along with laboratory test results.

    nps Repository record for Class E switching model RF power amplifier (opens in a new tab)

  4. Photoswitch-based Class E microwave power amplifer

    … project was to investigate the use of a novel Class E amplifier operating at 10 GHz. The Class E amplifier was studied because of its simplicity and excellent high frequency characteristics. Photoswitches were considered for the active device instead of transistors because they have fast …

    missouri Repository record for Photoswitch-based Class E microwave power amplifer (opens in a new tab)

  5. Class E amplifiers and their modulation behaviour

    The Class E power amplifier has very high drain efficiency under quasi-static conditions, and is a good candidate for Envelope Elimination and Restoration (EER) or other polar techniques. Unfortunately it has an unusual carrier frequency response, for which no analytic expression was known; this …

    birmingham Repository record for Class E amplifiers and their modulation behaviour (opens in a new tab) Download PDF for Class E amplifiers and their modulation behaviour (opens in a new tab)

  6. High Efficiency Class E Microwave Frequency Multipliers

    … the successful implementation of high efficiency class E frequency multipliers is presented in this work. An innovative class E configuration is proposed for a frequency tripler that provides an advantage over the conventional designs, by allowing a 50 %duty cycle drive with a realisable load for …

    whiterose Download PDF for High Efficiency Class E Microwave Frequency Multipliers (opens in a new tab)

  7. PIN photodiode controlled class E microwave power amplifier

    … is to design, build and test a switched-mode class E amplifier operating at 1GHz, using a PIN photodiode as switch. In order to explore the optically controlled class E amplifier configuration, I have done some research on characteristics of PN junction photodiode, PIN photodiode and avalanche …

    missouri Repository record for PIN photodiode controlled class E microwave power amplifier (opens in a new tab)

  8. Class-E Power Amplifiers in Modern RF Transmitters

    … building load modulation transmitters based on class-E power amplifiers. The first contribution is an analytical model for derivation load network parameters. The proposed model derives the parameters for both the peak and back-off power levels providing high efficiency. The proposed model …

    maynooth Download PDF for Class-E Power Amplifiers in Modern RF Transmitters (opens in a new tab)

  9. Design of Class-E Radio Frequency Power Amplifier

    … communication systems. A power amplifier's classes (A, AB, B, C, F, E, etc), and design techniques (Load-pull and large-signal S-parameters techniques) are presented. The design accuracy of class-A power amplifier based on the small-signal S-parameters was investigated, where compression in …

    vt Repository record for Design of Class-E Radio Frequency Power Amplifier (opens in a new tab)

  10. Class E GaN Power Amplifier Design for WiMAX Base Stations

    … explores the highly efficient switched mode Class E microwave power amplifier using the Gallium Nitride on Silicon Carbide HFET (GaN-on-SiC) technology. The smallest gate length (0.15 µm) device recently released by NRC is used in this design. It provides higher performance at lower cost and …

    ottawa-retro Repository record for Class E GaN Power Amplifier Design for WiMAX Base Stations (opens in a new tab)

  11. Design fully-integrated dual-band two-stage class-E CMOS PA

    … cost is also changed. In this thesis, because Class E power amplifier has lower power dissipation, 100% ideal efficiency, simple circuit structure, and strong applicability, the Class E is used as power amplifier in main stage. Moreover, in order to decrease input power and increase output …

    unt Repository record for Design fully-integrated dual-band two-stage class-E CMOS PA (opens in a new tab)

  12. An Evaluation of the Class E Power Amplifier for Directed Energy Applications

    This research evaluated the class E power amplifier for directed energy applications for scenarios that demand compact, efficient, and mobile microwave sources. The class E power amplifier was evaluated through simulation, design, fabrication, and experimentation. A GaN HEMT transistor was selected …

    ttu Repository record for An Evaluation of the Class E Power Amplifier for Directed Energy Applications (opens in a new tab)

  13. Class-e Cascode Power Amplifier Analysis And Design For Long Term Reliability

    This study investigated the Class-E power amplifier operating at 5.2 GHz. Since the operation of this amplifier applies a lot of stress on the switching transistor, a cascode topology was applied in order to reduce the drain-source voltage stress. Such an amplifier was designed and optimized in …

    ucf Repository record for Class-e Cascode Power Amplifier Analysis And Design For Long Term Reliability (opens in a new tab)

  14. A Class-E Inductive Powering Link with Backward Data Communications for Implantable Sensor Systems

    … unit incorporates a high-efficiency switch-mode Class-E amplifier operating at ~200 kHz for driving the primary coil. The secondary unit consists of a parallel resonant coil followed by the power recovery circuitry. Means for backward data communication from the internal to the external unit over …

    ut-knoxville Repository record for A Class-E Inductive Powering Link with Backward Data Communications for Implantable Sensor Systems (opens in a new tab)

  15. A Novel Control Scheme for Class E Wireless Power Transfer Systems in Biomedical Implants

    … thesis presents the analysis and design of two Class E WPT systems and introduces a novel control scheme. The proposed controller ensures zero voltage switching (ZVS) across a wide range of input voltage, input power, coil separation, and load resistances through the indirect control of …

    queens Repository record for A Novel Control Scheme for Class E Wireless Power Transfer Systems in Biomedical Implants (opens in a new tab)

Page 1 of 6