Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 16 of 16 for “"closed-cell foams"”.
-
Micro-mechanical Modelling of Polymeric Closed-cell Foams: Effect of Microstructural Variability on the Mechanical Properties
Polymeric closed-cell foams are increasingly used as the cores of sandwich structures in marine, railway and wind power industries due to their lightweight, good mechanical properties, high impact-absorption capacity, moist resistant, excellent acoustic isolation, and low thermal conductivity. The …
-
Strength and stiffness of cellular foamed materials
The use of cellular foams as a core material in light-weight optical and structural systems is of considerable interest. Research and development of these systems, however, have been hampered by the lack of material property data and uncertainty in the use of various suggested material …
-
MODELING AND EXPERIMENTAL INVESTIGATIONS OF THE SHOCK RESPONSE OF VISCOELASTIC FOAMS
This thesis presents a new constitutive model for closed-cell foams tailored for compressive shock loads and an experimental investigation of two commercial foam products. The new model requires just two characterization experiments to find material parameters, making it far more convenient than …
-
Dynamic deformation mechanics of closed-cell metallic foams
Metallic foams are good impact energy absorbing materials due to their extraordinary combination of physical and mechanical properties. A comprehensive knowledge of the deformation mechanisms of cellular structures underpins their potential application. This thesis focuses on the deformation of …
-
Development of polymeric foam materials with improved mechanical and acoustic properties
… and applied in the producing of polymeric foams. Microcellular closed cell polymethyl-methacrylate (PMMA) foams were produced using the batch foaming process. The foam morphologies and mechanical properties such as elastic modulus, tensile strength and elongation at break were investigated …
-
On the Development of High Strain Rate Experiments for the Characterization of Engineering Materials
… crack growth direction is presented. 2) Rigid closed cell foams were subjected to compressive shock loading and the effect of foam density and strain rate on the compressive properties of the foam is presented. 3) Finally, a high strength aluminum alloy is subjected to high strain rate …
-
Predicting Long-Term Creep Behavior Using Short-Term Stress Relaxation Data in Expanded Polyethylene Foam
Closed cell expanded polyethylene (EPE) foams are widely used for protective packaging due to their high energy absorption properties and recyclability. However, these foams can be subjected to sustained compressive stresses (13.78 - 36.20 kPa), depending on density and application, leading to …
-
Deformation Of Multifunctional Materials At Various Time And Length Scales: A DIC-Based Study
… including woven composites and polymeric foams, using full-field measurements. Attention has been especially drawn towards the challenges associated with characterizing these materials at extreme length and time scales, and investigating the advantages of full-field measurements to resolve …
-
Advanced mechanics of materials with microstructure
… established to predict the elastic response of cellular materials with distributions of cell geometries. Cellular materials find important applications in structural engineering. The approach does not require complex and time-consuming computational techniques usually associated with modeling …
-
Effect of microstructure of closed cell foam on strength and effective stiffness
… with the modeling and failure analysis of closed cell foam with various scales of microstructure that is disordered due to defects. This foam material is used for the forward bipod closeout on the space shuttle external tank. Three dimensional finite element simulations of closed cell foams …
-
Manufacture and Characterization of Micro-/Nano-fibrillated Composites and their Applications
… a great candidate for foaming. Low-density, closed cell foams are successfully manufactured from M/NFC showing ultra-low thermal conductivity (~32 mW∙m-1∙K-1). Furthermore, we demonstrated a new approach to generate electrically percolated core-sheath fibrils with low reinforcement …
-
Auxetic foams for sports applications
This thesis assesses whether current auxetic foams can improve the performance of sporting protective equipment, and lays out steps to realise their commercial potential. A wide range of conversion temperatures (120 °C to 200 °C) and times (20 to 180 minutes) for ~3 x 3 x 9 cm conversions of …
-
A Comprehensive Study on Moisture Absorption of Thermosetting Polymers, Micro- and Nanocomposites, and Foams
… absorption. Moisture absorption tests on ROHACELL® WF-71 closed-cell foam showed up to 62% change in the maximum absorbed moisture due to the effect of thickness of the foam. Thickness of closed-cell foams changes the foam porosity by the open-cells on the surface to the closed-cell ratio. The …
-
A Study on Effect of Manufacturing Parameters on Morphology of A356 Aluminum Foam
Metal foams have shown an excellent promise for usage as multifunctional material concerning research & development in the last 20 years. They provide remarkable mechanical as well as physical properties being lightweight. Open-cell metal foams have already been used in sound and noise absorption. …
-
MINIMUM SAMPLE SIZE NEEDED TO CONSTRUCT CUSHION CURVES BASED ON THE STRESS-ENERGY METHOD
… samples needed to construct cushion curves for closed-cell cushioning materials. Consequently the laboratory and data analysis time are reduced as well. The stress-energy method was used to find the minimum sample size needed to construct cushion curves for closed-cell cushioning materials. A …