Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 22 for “"coated wire"”.
-
Critical evaluation of the coated wire glucose sensor
Previous literature indicated that a coated wire glucose sensor consisting of a liquid ion exchange material and an ionic glucose complex coated on a platinum wire responded to changes in glucose concentration because of a shift in the equilibrium between the associated and dissociated forms of the …
-
Diamond Coated Wire Cutting of Solar Si Ingots: New Insights Using Raman Microspectroscopy
Diamond embedded abrasive wire (henceforth called diamond wire) sawing process of Si is a highly efficient technique for rapid wafering of solar Si ingots. However, the root causes for cutting efficiency losses are unknown. One approach to understanding this complex process is to study 1) diamond …
-
Numerical and experimental development of an efficient adsorption desalination and cooling system
… between a packed rectangular-finned tube and a coated wire-finned tube is conducted. Results showed that the coated wire-finned tube enhanced the adsorption system specific daily water production (SDWP) and specific cooling power (SCP) by 82% compared to the packed rectangular finned tube, while …
-
Utredning av fosfatets inverkan vid pressning av rullar i LRQ MEDIUM BEARINGS
… in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. …
-
Evaluating the feasibility of implementing direct analysis in real time - mass spectrometry for the forensic examination of post-blast debris
… headspace concentration using Carbopack™ X coated wire mesh were tested for the effectiveness of separating the analytes of interest of smokeless powder from various matrix interferences. Hodgdon Hornady LEVERevolution (HHL) smokeless powder, Pennzoil 10W-40 (P10W40) motor oil, and residue …
-
Envisioning the Mind: Children's Representations of Mental Processes
… glue, felt-tip pens, pipe cleaners, and plastic-coated wire. These visual responses have been photographed, described, and scored according to the number of materials used, the number of colors used, and the dimensionality of the piece (photos, descriptions, and scores are included in the …
-
Transport phenomena in hydrogel membranes
… hydrogels were used as membrane overlays on coated wire ion-selective electrodes that employed conventional plasticised-PVC-valinomycin based sensing membranes. The hydrogel overlays were found to affect the access of the analyte but not the underlying electrochemistry.
-
Investigating Scalable Manufacturing of High-Conductivity Wires and Coatings From Ultra-Long Carbon Nanotubes
… mechanical and electrical properties. Wires and coatings from ultralong nanotubes that are highly crystalline, well-aligned and densely packed can achieve this goal. High-performance CNT conductors will be relatively lightweight and resistant to harsh conditions and therefore can …
-
Sensors and materials
… novel solid-state ion-selective electrodes. Both coated wire electrodes ( C W E ) and solid contact (SC) electrodes, which combined the electronically conducting nature of electropolymerised polythiophene (PT) of polyoctylthiophene ( P O T ) with an ionically conducting PVC/ionophore layer, were …
-
Hydrodynamic lubrication and coating of wire using a polymer melt during drawing process.
… a polymer melt as the lubricant during the wire drawing process. The device is heated to convert the polymer feed into a viscous melt and the pressure required is generated by a hydrodynamic action produced by the motion of the wire. On the basis of experimental evidence, it is apparent that …
-
ION-SELECTIVE ELECTRODES FOR ORGANIC CATIONS AND PHARMACEUTICALS (ISE, POLYMER MEMBRANE CALCIUM CHANNEL BLOCKERS).
… Two Immiscible Electrolyte Solutions (ITTIES). Coated wire Polymer Membrane Ion-Selective Electrodes (PMISEs) based on dinonylnapthalenesulfonic acid (DNNS) were prepared for several alkylammonium ions and pharmaceuticals. Selectivity coefficients and other operational characteristics were …
-
Rapid dynamic headspace concentration and characterization of smokeless powder using direct analysis in real time - mass spectrometry and offline chemometric analysis
… an analytical approach that utilizes novel wire mesh coated with CarbopackTM X, dynamic headspace concentration and DART-MS was evaluated to determine if the approach could generate information rich chemical attribute signatures (CAS) for smokeless powder. CarbopackTM X is a graphitized …
-
Modified Hydrogel Matrices in Fibre Optic Sensors
… properties of the most successful membrane, on a coated wire electrode and also on the fibre optic test bed, in a series of test environments, indicated that the reagent was possibly acting as an ion exchanger and hence having a major influence on transport and therefore sensor characteristics.
-
Development of a desiccant system for space air conditioning using metal-organic framework materials
… Various heat exchangers were considered, and the wire-finned heat exchanger was identified as the most efficient for coating with the identified MOF- 303/G. An advanced computational fluid dynamics model of MOF-303/G coated wire-finned tube was created using COMSOL Multiphysics software. This …
-
INVESTIGATIONS OF POLYMER MEMBRANE ION-SELECTIVE ELECTRODES
… conventional (i.e., with internal reference) and coated-wire types were prepared. Neither gave satisfactory response. Cation selective electrodes based on the perfluorinated, sulfonic acid containing ion exchange polymer NAFION 120® were investigated next. This material produced well-behaved Cs⁺ …
-
Development Of Electrochemical Sensors And Non-Covalent Monolayer Modification Of Graphene
… containing bipyridyl ligands. Compared to coated-wire SC-ISEs, SC-ISEs using the methacrylate-based redox buffer as the inner reference exhibited a much better electrode-to-electrode reproducibility. Moreover, with its high lipophilicity, the redox buffer was compatible with ionophore-doped …
-
Synthesis and application of macrocyclic compounds for metal cation sensors
… fabrication. Ion Selective Electrodes (ISEs) and Coated Wire Electrodes (CWEs) were made from polymer blend membranes and their response to alkali metal cations was tested. The ISEs made with mobile carriers were active, while those prepared from immobilised carriers were inactive. The reverse was …
Page 1 of 2