Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 64 for “"coating adhesion"”.
-
SUBSTRATE AND FEEDSTOCK FACTORS AFFECTING COLD SPRAY COATING ADHESION AND RELATED IMPACTS ON CORROSION
… of corrosion on susceptible materials. Lack of adhesion strength is one of the limitations currently preventing cold spray from becoming a dominant resource. Adhesion strength is the strength of the bond between the cold-sprayed coating and the substrate. Without good adhesion, the coating …
-
The notched coating adhesion specimen: a fracture test for coatings and accelerated screening test for adhesion
A simple adhesion test method is proposed to provide estimates of the debond toughness of adhesive bonds. Notched coating adhesion (NCA) specimens consist of single substrates coated with thin layers of adhesive. The coating is notched to induce initial debonds, and the specimen is then loaded in a …
-
On Coating Durability of Polymer Coated Sheet Metal under Plastic Deformation
… of sheet metal into the desired shape and coating of the formed part with organic coating. An alternative manufacturing route is to coat the sheet metal first before forming. The change in the manufacturing sequence can potentially improve cost and reduce environmental impact. This …
-
Development and Characterisation of Bioactive Coatings for Magnesium-based Medical Implants: Enhancing Corrosion Resistance and Biofunctionality in Skeletal Repair Applications
… different configurations of bioactive CaP-based coatings, including dicalcium phosphate dehydrate (DCPD), octacalcium phosphate (OCP), and dual-layer DCPD OCP coatings, were applied to control the corrosion behaviour of pure Mg. The adhesion force results demonstrated that the DCPD coating …
-
Semi-continuous emulsion copolymerization of styrene-butyl acrylate with methacrylic acid: Structure-property relationship
… emulsion polymers are widely used for exterior coatings because of their good exterior durability. Different monomer combinations can produce a variety of copolymer products for coating applications. A broad range of functional chemical groups can also be incorporated into the polymer chain to …
-
High performance clear-coat systems for wood used outdoors
… wood’s color and texture. Unfortunately, clear coatings used on wood outdoors fail within one to two years mainly because of photodegradation of the underlying wood substrate. The performance of clear coatings on wood can be enhanced by photostabilizing the wood before coating or by modifying …
-
Adhesion Strength of Cordierite Bulk Coatings on Molybdenum Substrates
… nickel, and chromium. The development of a coating adhesion test methodology was required to choose between interface designs. An indentation method was chosen because of ease in testing and availability of fracture mechanics interpretations of test data. The interfacial fracture toughness …
-
The Adhesion Strength of a Plasma Sprayed Silicon Bond Coating on a Silicon Carbide Ceramic Matrix Composite
… turbine engines. Environmental barrier coatings (EBCs) are essential for implementing these components as they insulate and protect the substrate from reaction with water vapor in the engine environment. EBCs are typically deposited via atmospheric plasma spraying (APS) and preparing the …
-
Toward a Production Ready FBJ Process for Joining Dissimilar Combinations of GADP 1180 Steel and AA 7085-T76
… (3) improving surface finish for better coating adhesion so that joints can be made to withstand extended corrosion testing; and (4) determining the failure modes and fatigue life of joint components at high and low load amplitudes. No universal parameter set for optimizing peak load for …
-
Ανάπτυξη και μελέτη δομής και ιδιοτήτων επικαλύψεων νανοϋλικών με τεχνολογίες θερμικού ψεκασμού
… and optimization of HVOF and APS thermal spray coatings from nanophased materials, using the Taguchi design of experiments method. The influence of grit–blasting on surface roughness and coating adhesion strength was also studied. Moreover, an evaluation of air quality inside the building of a …
-
Electrodeposition of nickel coatings on aluminium alloy 7075 through a modified single zincating process
… often is often difficult in producing a coating with good adhesion when compared to other metals. This is due to the rapid formation of oxide layers on the substrate’s surface when exposed to air and water, preventing metallic bonds from forming between the nickel coating and the …
-
Influence of surface characteristics on the stress corrosion cracking resistance of steel gas piplines
… gas pipelines, which commonly use protective coatings and cathodic protection to mitigate corrosion. Surface preparation of the steel surface is critical for protective coating systems as it affects coating adhesion. The level of grit blasting usually specified is that of a minimum 2½ class …
-
Laser Assisted Coating of FeCoNiCrTiAl Complex Concentrated Alloy System on Steel Forging Die Materials and Dies
… and laser fluence to identify the optimal CCA coating parameters for these dies. Coating quality was investigated by observing porosity, coating adhesion, and gradient microstructural changes using scanning electron microscopy (SEM), and by observing Vickers hardness across the cross-sectional …
-
Restoration of Aluminum Aerospace Parts and Coatings Using Cold Gas Dynamic Spraying
… corrosion resistance properties, pure aluminum coatings are commonly used in the aerospace field for corrosion protection of steel, aluminum alloy components, and titanium alloy components. The common method to deposit these coatings is called ion vapour deposition (IVD). These IVD aluminum …
-
ENHANCING MECHANICAL PROPERTIES OF COLD-SPRAYED ALUMINUM COATINGS USING GRAPHENE-NANOPLATELET AND MICRO-BORON-CARBIDE REINFORCEMENTS
… (µB4C) in cold-sprayed Al matrix composite coatings. High energy ball milling was used to create compositions of 2 vol.% GNP, 2 vol.% µB4C, and one of 1 vol.% GNP with 1 vol.% µB4C. All reinforced compositions consisted of a total of 2 vol.% reinforcement to compare the effectiveness of …
-
Development of high performance tribological coatings for application onto hip joint prostheses
In this thesis Graphit-iC™, an amorphous carbon coating developed by Teer Coatings Ltd. was modified and deposited onto CoCr and WHMWPE substrates in order to improve the wear properties. It was identified that depositing a hard coating onto soft substrate would cause high stresses and lead to …
-
Electrodeposition of Co-Mn and Cu-Mn based Spinels onto Solid Oxide Fuel Cell Interconnects
… the cathode side. It has been shown that spinel coatings reduce the effects of chromium oxide evaporation. In this thesis, two spinel systems are explored for potential application. Cobalt-manganese spinel is a stable spinel which have a wide range of composition, while remaining sufficiently …
-
A STUDY OF THE EFFECT OF A SURFACE TREATMENT ON THE PERFORMANCE OF CEMENTED CARBIDE INSERTS
… significant potential for using WPC as a pre-coating treatment for improving coating adhesion on cemented carbide cutting inserts.
-
Calcium phosphate coatings on coronary stents by electrochemical deposition
Calcium phosphate ceramic coatings, especially hydroxyapatite (HA), have attracted much attention in the orthopedics and dentistry due to their excellent biocompatibility and bioactivity. Among the different methods of calcium phosphate coatings processing, electrochemical deposition (ECD) is a …
-
Optimization of Copper Coatings: Cold Spray, HVAF, and N-Heterocyclic Carbene Copper Powder Treatment
This thesis explores the deposition of copper coatings using Cold Spray (CS) and High-Velocity Air Fuel (HVAF) technologies, focusing on minimizing oxide formation to preserve copper’s desirable properties for high-performance applications in aerospace, automotive, and energy industries. Copper is …
Page 1 of 4