Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 49 for “"coating onto"”.
-
Formation of salt crystal whiskers on nanoporous coatings and coating onto open celled foam.
… from salt solution saturated nanoporous silica coatings. Coated substrates were partially immersed into an aqueous potassium chloride solution and then kept in a controlled relative humidity chamber for whisker growth. The salt solution was first wicked into the coating by capillary action, and …
-
Applied study and modeling of penetration depth for slot die coating onto porous substrates
A distinctive field in the coatings industry is the coating of porous media, with broad applications in paper, apparel, textile, electronics, bioengineering, filtration and energy sector. A primary industrial scale process that can be used to coat porous media in a fast and flexible manner is slot …
-
Development of Ti-6Al-4V Coating onto Ti-6Al-4V Substrate Using Low Pressure Cold Spray and Pulse Gas Dynamic Spray
… successfully deposit Titanium Ti-6Al-4V layers onto Ti-6Al-4V substrate using two new commercially available Cold Spray processes such as Low Pressure Cold Spray (LPCS) and Pulsed Gas Dynamic Spray (PGDS). The second objective of this work is to develop a technique to repair Titanium parts since …
-
Production of curcumin formulations by supercritical fluid-assisted coating and coprecipitation processes
… allow simultaneous precipitation of the API and coating onto the surface of larger particles, so the release and flow properties of the formulation can be improved in a single step. The aim of this project is to extend the understanding and applicability of SAS in conjunction with fluidized bed …
-
Sinter-patterning of oxide dielectric and high critical transition temperature films by pulsed neodymium:YAG laser
… film were fabricated by spin coating onto single crystal substrates such as Si, ZrO$\sb2$ and MgO.
-
Effect of rheology and crystallinity on processing and barrier properties of PHA
… also studied to improve the PHA processing and coating onto paperboard at a pilot scale. Additionally, water vapor barrier properties of the different PHA samples and PHA-coated paperboard were measured and the effect of PHA molecular weight and crystallinity on these was also assessed. From …
-
Characterisation and optimisation of sol-gel-derived thin films for use in optical sensing
… sol-gel films were fabricated by dip-coating onto silicon and glass substrates. For TEOS-derived films, film thickness and temporal stability were monitored as a function of dip-speed, watenprecursor ratio, sol aging time and time after dipping. Refractive indices of films were also …
-
pH-Responsive Polymers for Biosurfaces: An Investigation of Solution Properties and Surface Modifying Performance
… was expected. For films prepared via spin-coating onto mica surfaces, addition of surfactants to the solution resulted in film surfaces with more regular morphology and surface coverage. Flow-through studies in QCM, however, showed that there was no polymer deposition or adhesion to the …
-
Roll-to-roll sputtering of thermochromic VO2-based coatings onto ultra-thin flexible glass
… Although thermochromic vanadium dioxide based coatings have been extensively studied at laboratory scale, there are still fundamental challenges for industrial manufacturing. The present work aims to explore the prospects of the deposition of a tungsten-doped vanadium dioxide based coating onto …
-
Coating of catalyst supports: links between slurry characteristics, coating process and final coating quality
… homogeneity of the platinum group metal (PGM) coating onto the monolith block, to maximise catalytic performance for a minimum PGM loading, is therefore paramount. In this study, an automatic film application is used for coating γ–alumina slurries onto Fecralloy®, an integral component of …
-
Towards Designing Composite membranes for CO2 Separation: The Inclusion of Hybrid TiO2-PEG Structures and the Study of their Interfaces
… Finally, the development of two pathways (“Coating Onto” and “Grafting From”) were assessed for their ability to modify the tubular ceramic support and preliminary gas separation tests were performed.
-
Selective Laser Melted ‘Coating’ of Co-Cr-Mo onto a Ti-6al-4v Implant Surface
… chromium molybdenum (Co-Cr-Mo) alloy as a ‘coating’ onto a grade 5 titanium alloy (Ti-6Al-4V) substrate for use as medical implants. Such a configuration of these biocompatible alloys is expected to provide a lightweight (due to the high strength-to-weight ratio of Ti-6Al-4V) and (abrasive) …
-
COLD SPRAY OF FUNCTIONALLY GRADED ALUMINUM METAL MATRIX COMPOSITE COATINGS REINFORCED WITH BORON CARBIDE AND BORON NITRIDE NANOTUBES
… metallic surfaces, particularly Al, as well as coating onto Al substrates to enhance wear resistance among other properties. Improving the wear resistance of Al requires the integration of a reinforcing filler/s. Notably, there is a research gap regarding the cold spray application of …
-
Development of high performance tribological coatings for application onto hip joint prostheses
In this thesis Graphit-iC™, an amorphous carbon coating developed by Teer Coatings Ltd. was modified and deposited onto CoCr and WHMWPE substrates in order to improve the wear properties. It was identified that depositing a hard coating onto soft substrate would cause high stresses and lead to …
-
Development of an optical sol-gel-based dissolved oxygen sensor
… silica films were fabricated by dip-coating onto planar and optical fibre substrates. The films were pre-doped with oxygen-sensitive ruthenium complex, [Ru(n)-tris(4, 7-diphenyl-1,10-phenanthroline)]2+, whose fluorescence is quenched in the presence of oxygen. The structure and …
-
Flow Imaging of the Fluid Mechanics of Multilayer Slide Coating. Flow visualisation of layers formation in a 3-layers slide coating die, measurement of their thicknesses and interfacial and free surface flow instabilities
Coating onto a moving substrate several films simultaneously on top of each other is a challenging exercise. This is due to the fact, depending on operating conditions (thickness and velocity of individual layers and the physical properties of the coating fluids), flow instabilities may arise at …
-
Preparo, caracterização e análise de nanocompósitos de Diatomita e Nanocelulose Cristalina para aplicação como biomembranas
… of NCC were applied, via Silk Screen Coating, onto the surface of Diatomite sintered laminates, leading to the final nanocomposite obtained in this study: Diatomite biomembranes superficially coated with NCC. Subsequently, FE-SEM analysis signaled the partial reduction on the pore size …
-
Deep understanding of degradation in lithium ion batteries through experimental and first-principles study
… To address these issues, applying an ultrathin coating onto active materials via Atomic Layer Deposition (ALD) is an efficient way. Although numerious works have been done for active material performance improvement via ALD technology, the fundamental enhancement mechanisms of ALD coating on …
-
Biomineralised hydroxyapatite as a cement coating
… deposition of ahydroxyapatite coating onto OPC, and describe the biochemical mechanisms underlying this process.The biogenic hydroxyapatite deposition takes place in a synergistic process with the cementsubstrate material; utilising a Pseudomonas fluorescens biofilm, phosphates …
Page 1 of 3