Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 88 for “"coefficient of restitution"”.

  1. Technique for Measuring the Coefficient of Restitution for Microparticle Sand Impacts at High Temperature for Turbomachinery Applications

    … deposition in gas turbine engines are functions of particle/wall interactions and the Coefficient of Restitution (COR) is a fundamental property of these interactions. COR depends on impact velocity, angle of impact, temperature, particle composition, and wall material. In the first study, a …

    vt Repository record for Technique for Measuring the Coefficient of Restitution for Microparticle Sand Impacts at High Temperature for Turbomachinery Applications (opens in a new tab)

  2. Experimental investigation of collisional properties of spheres

    … results on the collisional properties of spheres obtained through high-speed video analysis. An apparatus is built that produces collisions of spheres of various sizes with a wide range of impact, velocities and incidence angles. Edge detection techniques are implemented to track the …

    njit Repository record for Experimental investigation of collisional properties of spheres (opens in a new tab)

  3. Advancements of Particle-Surface Interaction Studies through Novel Measurement Technique Development and Engineering Modelling

    Turbomachinery operating on aircraft are often exposed to dusty or sandy environments during typical service. Engines on commercial and military flights operating in desert regions such as the Middle East or even Phoenix, Arizona can become severely damaged by ingesting dirt, grit, sand, and dust. …

    vt Repository record for Advancements of Particle-Surface Interaction Studies through Novel Measurement Technique Development and Engineering Modelling (opens in a new tab)

  4. Uncertainty quantification of an effective heat transfer coefficient within a numerical model of a bubbling fluidized bed with immersed horizontal tubes

    This study investigates sources of steady state computational uncertainty in an effective heat transfer coefficient (HTC) within a non-reacting bubbling fluidized bed with immersed horizontal heat-conducting tubes. The methodical evaluation of this variation, or Uncertainty Quantification (UQ), is …

    bu Repository record for Uncertainty quantification of an effective heat transfer coefficient within a numerical model of a bubbling fluidized bed with immersed horizontal tubes (opens in a new tab)

  5. On investigation of contact models in DEM simulation of rockfalls

    Simulation of rockfall allows us to protect infrastructures and forests along rock slopes against the impacts of rockfall. In this thesis, a computer program based on 3D Discrete Element Method (DEM) is developed by the author for rockfall simulation and fundamental investigation of physics of a …

    concordia Download PDF for On investigation of contact models in DEM simulation of rockfalls (opens in a new tab)

  6. Dynamic decay of motion of rocking concrete members

    <p>This study was conducted as part of a research project aiming at understanding the dynamics of precast rocking concrete members. The characteristics and energy dissipation associated with the dynamic response of these systems were investigated.</p> <p>The simple rocking model broadly used by the …

    iastate Repository record for Dynamic decay of motion of rocking concrete members (opens in a new tab)

  7. Rock fall engineering : development and calibration of an improved model for analysis of rock fall hazards on highways and railways

    … falls over the last five years is an extension of my 45 year professional career that has included a wide variety of rock fall projects. This experience has provided me with an excellent understanding of rock fall behavior; the objective of my research has been to apply this to developing …

    ubc Repository record for Rock fall engineering : development and calibration of an improved model for analysis of rock fall hazards on highways and railways (opens in a new tab) Download PDF for Rock fall engineering : development and calibration of an improved model for analysis of rock fall hazards on highways and railways (opens in a new tab)

  8. Mathematical modeling of interaction of wet particles and application to fluidized beds

    … introduced into the system. Due to the effects of liquid, the multi-phase transport phenomena of these systems are more complicated compared to conventional gas-solid fluidization systems. In this thesis, mathematical modeling is used to study the interaction of wet particles. First, a …

    ubc Repository record for Mathematical modeling of interaction of wet particles and application to fluidized beds (opens in a new tab) Download PDF for Mathematical modeling of interaction of wet particles and application to fluidized beds (opens in a new tab)

  9. Investigation Into Snap Loading of Cables Used in Moored Breakwaters

    … motion. Energy is dissipated through the use of a coefficient of restitution applied when a mooring line becomes taut (i.e., reaches its natural length). The mooring line is modeled as an inextensible cable with no axial or bending resistance when slack. Snap loading arises when a mooring line …

    vt Repository record for Investigation Into Snap Loading of Cables Used in Moored Breakwaters (opens in a new tab)

  10. Alternative injury response functions for evaluating head accelerations, with application to pedestrian headform testing.

    Impact testing of vehicles and helmets is performed under the specifications of a test protocol to ensure that regulatory standards and community expectations are met in terms of head injury safety. Impact severity is usually measured using the acceleration of the impactor (or dummy head) that is …

    adelaide Repository record for Alternative injury response functions for evaluating head accelerations, with application to pedestrian headform testing. (opens in a new tab)

  11. Dynamics of two particles colliding in a one-dimensional channel.

    Here, we thoroughly study the dynamics of two spherical identical particles free to collide in a vertically shaken channel experimentally and numerically. Multiple sets of data are obtained with different driving frequencies and amplitudes. Both experimental and simulation results exhibit …

    baylor Repository record for Dynamics of two particles colliding in a one-dimensional channel. (opens in a new tab) Embargoed until 2028-12-15

  12. Restrained Rocking Response of Equipment on Rigid Floors

    … This study investigates the rocking response of equipment resting freely on rigid floors and also the effect of restrained rocking on the response of partially fixed equipment under seismic excitations.</p> <p>Equipment which rests freely on rigid floors is simulated as a rigid rectangular …

    mcmaster Repository record for Restrained Rocking Response of Equipment on Rigid Floors (opens in a new tab)

  13. Modeling and Validation of Tension-Element Based Mechanisms for Golf Ball-Club Impact

    … feasibility and performance benefits of the tension-element concept in golf club heads; however, higher fidelity models needed to be created and validated for this concept. There is a need for more accurate models for this concept to further investigate its performance benefits. …

    byu Repository record for Modeling and Validation of Tension-Element Based Mechanisms for Golf Ball-Club Impact (opens in a new tab) Download PDF for Modeling and Validation of Tension-Element Based Mechanisms for Golf Ball-Club Impact (opens in a new tab)

  14. Rock fall mitigation for an open pit mine experiencing substantial rock fall from overblasting

    … substantial rock fall in the south portion of their open pit mine due to rock damage from blasting resulting in highly fractured wall rock. This has increased the volume of rock fall experienced in the mine, and the rock fall has caused accumulation of debris on benches and crest loss, …

    colo-mines Repository record for Rock fall mitigation for an open pit mine experiencing substantial rock fall from overblasting (opens in a new tab)

  15. Analysis of particle deformation during impact deposition

    … that involve handling and processing of powders. Depending on the impact details, it can have various implications for a process, e.g. it can affect the flow behaviour of powders due to kinetic energy dissipation, or influence the particle-particle and particle-substrate bonding …

    whiterose Download PDF for Analysis of particle deformation during impact deposition (opens in a new tab)

  16. Granular Flow Experiments and Models Coupled with Measured Temperature-Dependent Properties for Solar Thermal Energy Transport and Storage

    Concentrated solar power is one of the most promising alternative sources of large- scale energy production with numerous applications including production of electricity, renewable fuel, and production of heat for industrial processes. High temperature granular media were characterized for solar …

    gatech Repository record for Granular Flow Experiments and Models Coupled with Measured Temperature-Dependent Properties for Solar Thermal Energy Transport and Storage (opens in a new tab)

  17. Steady state response of a second order servo-mechanism with backlash and resilience in the gears between motor and load

    … with the steady state response to a step input of a non-linear s ervomechani sm having viscous friction and a load position unity feedback loop. A gear train with "backlash between resilient gear teeth was located between the motor and load. The physical equations describing the system are …

    nps Repository record for Steady state response of a second order servo-mechanism with backlash and resilience in the gears between motor and load (opens in a new tab)

  18. An investigation of fluidized bed scaling relationships

    The goal of this research is to validate fluidized bed scaling relationships using spectral analysis of pressure fluctuations. Static pressure fluctuations are measured in two cold bubbling fluidized bed (BFB) models, a bubbling fluidized bed combustor, and a circulating fluidized bed (CFB) model. …

    iastate Repository record for An investigation of fluidized bed scaling relationships (opens in a new tab)

  19. Vibration as an aid in robotic peg-in-hole assembly

    … an analytical and experimental investigation of vibration assisted engagement for parts mating. A dynamic model of assembly is established by using Lagrange's equation for impact to derive impact equations for a robotic manipulator in peg-in-hole assembly. The model can be used to analyze part …

    njit Repository record for Vibration as an aid in robotic peg-in-hole assembly (opens in a new tab)

Page 1 of 5