Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 174 for “"cohesive zone model"”.
-
A Generalized Cohesive Zone Model of Peel Test for Pressure Sensitive Adhesives
… of the peel test is analyzed based on a cohesive zone model. Cohesive failure is assumed to prevail in the vicinity of the peel front, that is, the adhesive fails not by debonding from the adherends but by splitting of the adhesive itself. Generally, the failure of the adhesive is …
-
A cohesive zone model for thermomechanical fatigue and fracture of metallic materials
… stresses and temperature can vary with time. A cohesive zone model simulates material failure within the finite element method by describing material behaviour and damage evolution through a traction-separation relation. In this work, a viscoplastic cohesive zone model is developed in order to …
-
Cohesive zone model for facesheet -core interface delamination in honeycomb FRP sandwich panels
… of this dissertation is on developing efficient modeling techniques to study facesheet-core interface delamination in honeycomb fiber-reinforced polymer (HFRP) sandwich panels. Delamination problems are usually treated from a fracture mechanics point of view. However, interface delamination is …
-
Investigation of Interfaces Under Mechanical and Thermal Loading Using a Cohesive Zone Model
… present research was to develop a computational model to study delamination in laminated composite plates subjected to bending and extensional loads, and to study di erent joining techniques, as well as to predict the thermomechanical interfacial response. This model incorporates extreme …
-
Numerical Study of Stable Tearing Crack Growth Events Using the Cohesive Zone Model Approach
… strength of critical engineering structures. The cohesive zone model (CZM) has been widely applied to simulate fracture processes in a variety of material systems. However, its application to the study of elastic-plastic stable tearing crack growth events in ductile materials, especially under …
-
A Simulation By Using Cohesive Zone Model For Indentation Test In Thin-Film/Substrate Systems
… experiments using wedge-shape indenters. The cohesive zone model based on traction separation law (T-S) is employed during the FEM simulation. The cohesive zone model used in this thesis contains three important parameters: interface strength, interface energy and the shape of the traction …
-
Computationally Effective and Efficient Methods for Interface Characterization Using Cohesive Zone Model and Lubrication Theory
… discusses the development of three computational models of multi-physics phenomena present in additive manufacturing and brain injury. A major focus is on modeling an essential mechanical process of an additive manufacturing (3D printing) technology known as constrained surface stereolithography. …
-
Simulation of hydraulic fracturing for unconventional reservoirs with the use of extended cohesive zone model
Cohesive zone model (CZM) is considered to be one of the most dominant methods for simulating crack propagation in different fields. In petroleum engineering, the application of cohesive zone model is mostly related to hydraulic fracturing. The purpose of this work is to examine initiation and …
-
Investigation of translaminar fracture in fibrereinforced composite laminates---applicability of linear elastic fracture mechanics and cohesive-zone model
… attentions. A variety of fracture theories and models have been developed. Among them, the linear elastic fracture mechanics (LEFM) and cohesive-zone model (CZM) are two widely-accepted fracture models, which have already shown applicability in the fracture analysis of fiber-reinforced composite …
-
Application of a Rate Dependent Cohesive Zone Model to Predict Impact Response in Adhesively Bonded Ultra-High Strength Steel Tubes
… by material characterization and computational model validation at the component level. In this thesis, tailored hot stamped (THS) ultra-high strength steel (UHSS) hat sections were joined using structural epoxy adhesive and tested under quasi-static and dynamic loading rates. The experiments …
-
The Ductile to Brittle Transition in Polycarbonate
<p>An advanced bulk constitutive model is used with a new cohesive zone model that is stress state and rate-dependent in order to simulate the ductile to brittle failure transition in polycarbonate. The cohesive zone model is motivated by experimental evidence that two different critical energies …
-
Modeling of fracture in heavy steel welded beam-to-column connection submitted to cyclic loading by finite elements
… it is interesting to develop a finite element modeling of this connection to complete these experiments and perform a parametric study. The welded connection is modeled by three dimensional mixed solid elements. The constitutive law is elastoplastic with isotropic hardening identified for the …
-
Computational Modeling of Finite Deformation Fracture
… developed small deformation viscoelastic cohesive zone. Extensions made are novel reorientation algorithms in both two and three dimensions and embedding the nonlinear viscoelastic cohesive zone model into a Lagrangian frame of reference finite element code. These novel algorithms thus …
-
Improvement of a Multiscale Framework for the Analysis of Composite Materials
… At the mesoscale, two types of continuum damage models, a cohesive zone model, and a combination of the two types were compared using a [0/90]_(s) laminate under uniaxial tension and in-plane shear loads. The volume average stress-strain response, the crack density evolution, and a metric …
-
Computational Modeling of Damage in Critical Civil Infrastructure: Roadways and Railroads
… severe damage and potential structural failure. Modeling this damage is challenging due to the complex nature of crack initiation and progression, which depends on the material, loading, and environmental conditions. This study aims to model fatigue cracking in asphalt pavements and railheads …
-
Characterisation and modelling of the rate-dependent behaviour of adhesive bonded interfaces
… a numerical and experimental framework to model and characterise the rate-dependent mechanical performance of adhesively bonded structures. Experimental methods suitable for various strain rates – including impact – enable direct measurement of mechanical properties to derive accurate …
-
Cohesive zone modeling for predicting interfacial delamination in microelectronic packaging
… crack locations and crack propagation paths. Cohesive zone theory has been identified as an alternative method for modeling crack propagation and delamination without the need for a pre-existing crack. In a cohesive zone approach, traction forces between surfaces are related to the crack tip …
Page 1 of 9