Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 15 of 15 for “"cold joint"”.

  1. Impact of Retarder-Induced Roughness on Shear Friction Capacity using Conventional and High-Strength Reinforcement

    … it is clear that roughening the interface of a cold-joint contributes to increase its the shear-transfer capacity, the roughening methods currently used in practice are labor intensive. In addition, the ACI code prohibits the use of high strength steel reinforcement. To investigate these …

    washington Repository record for Impact of Retarder-Induced Roughness on Shear Friction Capacity using Conventional and High-Strength Reinforcement (opens in a new tab)

  2. Structural behavior of reinforced concrete members with cold joints : characterization and modeling in disturbed regions

    … of reinforced concrete (RC) members with cold joints through a combination of analytical and experimental studies. The research comprises material-level and structural-level experiments, nonlinear finite element analyses, database evaluation, and development of STM-based analytical model …

    texas Repository record for Structural behavior of reinforced concrete members with cold joints : characterization and modeling in disturbed regions (opens in a new tab)

  3. Performance of GFRP headed-end bars as interface shear friction reinforcement

    … shear transfer mechanism (IST) of steel-RC joints has been well-established and forms the basis of current design standards, limited research has explored the use of Glass Fibre-Reinforced Polymer (GFRP). As a corrosion-resistant, lightweight, and strong alternative in IST systems, GFRP …

    manitoba Repository record for Performance of GFRP headed-end bars as interface shear friction reinforcement (opens in a new tab)

  4. Non-Contact Lap Splices in Dissimilar Concretes

    … concrete placement such that there is a cold joint between the bars, have not been investigated. This situation is found in the repair of adjacent box beam bridges and in the construction of inverted T-beam systems, among others. It is vital to understand whether the same mechanisms are …

    vt Repository record for Non-Contact Lap Splices in Dissimilar Concretes (opens in a new tab)

  5. Performance of GFRP reinforcement as friction shear connectors in concrete composite elements

    … maintained only if the friction shear along the joint interface resulted from the gravity load is resisted. The characteristics of the reinforcement crossing the joint interface, concrete strength, and shear plane condition are some of the main factors controlling the integrity of composite …

    manitoba Repository record for Performance of GFRP reinforcement as friction shear connectors in concrete composite elements (opens in a new tab)

  6. The influence of caprock on blast fragmentation distribution

    … a limestone formation at a small scale. A cold joint was created in the upper portion of the test specimens to represent the bedding plane that separates caprock and substrate layers in a caprock-laden limestone bench. The scale-model test blocks were blasted using detonating cord. The …

    must-thes Repository record for The influence of caprock on blast fragmentation distribution (opens in a new tab)

  7. Field monitoring and numerical analysis of two Illinois integral abutment bridges

    As compared to conventional jointed bridges, integral abutment bridges (IABs) require lower construction and maintenance costs and have a longer service life, leading to their increased use by Departments of Transportation in the U.S. However, due to their unique design, their structural behavior …

    uiuc Repository record for Field monitoring and numerical analysis of two Illinois integral abutment bridges (opens in a new tab)

  8. Performance of lift joints subjected to thermal fatigue cycles

    … infrastructure over time, particularly at lift joint interfaces. This thesis presents the extent and results of said experimental program, which involved an investigation into the performance of concrete-to-concrete cold joints in cyclic thermal fatigue conditions. Small cylinders with joints …

    manitoba Repository record for Performance of lift joints subjected to thermal fatigue cycles (opens in a new tab)

  9. Seismic Retrofit of Reinforced Concrete Shear Wall by Integrating Selective Weakening and Self Centering

    … converted into rocking walls by introducing a cold joint at the wall foundation interface and by adding external post-tensioning. Two retrofitted rectangular RC shear walls were tested in laboratory to investigate the proposed retrofit scheme. The retrofitted shear walls showed minimized …

    alabama Repository record for Seismic Retrofit of Reinforced Concrete Shear Wall by Integrating Selective Weakening and Self Centering (opens in a new tab)

  10. End-Region Evaluation of Hybrid Ultra-High-Performance Concrete/Conventional Concrete Prestressed Girders

    … with a similar rheology and trapezoidal-shaped cold-joint textures demonstrated enhanced performance. The shear testing of hybrid girders consistently exhibited web-crushing failure. An assessment of the hybrid girder testing considered existing shear calculation methodologies and revealed that …

    oklahoma-thes Repository record for End-Region Evaluation of Hybrid Ultra-High-Performance Concrete/Conventional Concrete Prestressed Girders (opens in a new tab) Restricted access

  11. Experimental investigation of factors influencing interface shear strength

    … on investigating the interface shear strength of cold joints subjected to pure shear through an experimental study comprising 21 push-off test specimens. Five key variables were examined: interface roughness, concrete shear area, reinforcement ratio, reinforcement detailing, and cyclic loading. …

    texas Repository record for Experimental investigation of factors influencing interface shear strength (opens in a new tab)

  12. Investigating interface shear resistance through slant shear tests

    … in investigating the strength of struts crossing cold joints.

    texas Repository record for Investigating interface shear resistance through slant shear tests (opens in a new tab)

  13. Development and validation of a precast column solution for Texas bridges

    This dissertation examines a novel construction method utilizing Precast Prestressed Concrete Piles (PCP) filled with concrete cast-in-place, working as one complete column to evaluate their structural performance under varying levels of eccentricity, with the goal of introducing a new precast …

    texas Repository record for Development and validation of a precast column solution for Texas bridges (opens in a new tab) Embargoed until 2028-05-01

  14. Vliv segmentových strategií na mechanické vlastnosti velkoformátových dílů

    Při velkoformátové aditivně-subtraktivní výrobě polymerů je pro dosažení přesnosti a tvarové složitosti často nutné iterativně střídat tisk a obrábění. Tato strategie však naráží na nízkou pevnost rozhraní mezi postupně vyráběnými segmenty. Při nanášení nového segmentu na vychladlý a obrobený …

    brno-tech Repository record for Vliv segmentových strategií na mechanické vlastnosti velkoformátových dílů (opens in a new tab)

  15. Vady tlakově litých odlitků ze slitin hliníku

    Tato diplomova prace je zamerena na vady vyskytujici se u vyrobku vyrobenych tlakovym litim ze slitin hliniku. Teoreticka cast zahrnuje seznameni s technologii tlakoveho liti a popisem jednotlivych vad, pricin vzniku a napravnych opatreni. Prakticka cast se zabyva urcenim vady na predem vybranem …

    brno-tech Repository record for Vady tlakově litých odlitků ze slitin hliníku (opens in a new tab)