Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 84 for “"cold work"”.
-
Cold work embrittlement of interstitial-free sheet steel
… use in low carbon steels is often termed cold work embrittlement (CWE). Interstitial-free steels are especially susceptible to brittle intergranular fracture, as there is little free carbon in solid solution left to segregate to the grain boundaries, where its presence is thought to …
-
Stored Energy of Cold Work Changes Induced by Cyclic Deformation
Made available in DSpace on 2014-12-10T17:25:36Z (GMT). No. of bitstreams: 1 6612343.pdf: 2266804 bytes, checksum: ddcac6fc0f14c4d75fc8b836f6deee44 (MD5) Previous issue date: 1966
-
Micromilling of hardened (62 HRC) AISI D2 cold work tool steel
… of high carbon, high chromium hardened AISI D2 cold work tool steel using 0.5mm diameter coated (TiAlN) tungsten carbide end mills were carried out. Performance was assessed in terms of tool life/tool wear, surface roughness, cutting forces, burr formation, slot geometry accuracy and workpiece …
-
The Internal Friction Cold Work Peak in The Niobium - Nitrogen System
Made available in DSpace on 2014-12-12T01:03:58Z (GMT). No. of bitstreams: 1 7105075.pdf: 6809901 bytes, checksum: a909a9243feb5d2c6db01a610644d038 (MD5) Previous issue date: 1970
-
The Role of Local Strains from Prior Cold Work on Stress Corrosion
Several studies have recently reported that cold working exacerbates stress corrosion cracking (SCC) of materials in various environments, including those in which they were previously thought to be immune. While these studies usually consider cold work as a homogeneous effect, the presence of …
-
An X-Ray Diffraction Analysis of Cold Work Produced in Face Milling
… investigations aimed at finding the amount of cold work that was done by a certain type of cutter on a specimen were of the calorimetric type in which the beat generated by the milling section was converted into work. An investigation of the milled surface of the specimen showed no Visible …
-
Effects of induction hardening and prior cold work on a microalloyed medium-carbon steel
Includes bibliographical references (pages 86-94).
-
X-ray diffraction for residual stress and cold work measurements of shot peened materials
… treatment like shot peening. Shot peening is a cold work process consisting in impinging particles at high velocity onto the surface of metallic parts. The process induces a surface layer of compressive residual stresses and cold work. Shot peening is often considered as a beneficial surface …
-
Effects of cold work and Zn water chemistry upon the corrosion behaviour of Alloy 690 under simulated pressurised water reactor primary water conditions
… generator is typically comprised of a large network of tubes made primarily of the Ni-based alloy, Alloy 690. During start-up and continued operation, the hot water coolant creates oxide on the alloy surface, and the behaviour of this oxide has a strong bearing on the steam generator lifetime. …
-
Effect of cold working and annealing on mechanical properties, microstructure, and texturing of aluminum alloy 3104
… microstructure, and texturing as a function of cold working and annealing in aluminum alloy 3104 have been examined. The material used in this research was heavy gauge (>0.150 in.) can stock in the hot rolled condition. A two hour annealing treatment at 332 °C (630 °F) was given in which the …
-
Precipitation, recovery and recrystallization under static and dynamic conditions for high magnesium aluminum-magnesium alloys
… and no recrystallization occurs, even with prior cold work. Further studies of microstructures developed during warm working, with and without prior cold work, also indicate that precipitation and recovery dominate the microstructural changes in warm rolling at temperatures below the solvus for …
-
Nonlinear ultrasonic measurement on cold rolled and sensitized 304 austenitic stainless steel
… the changes of microstructure caused by cold work (cold rolling) using two nonlinear ultrasound methods, Rayleigh and longitudinal waves. Moreover it shows the sensitivity of nonlinear ultrasound to sensitization and combines sensitization and cold rolling, then is compared with previous …
-
Microstructural Investigation Of Precipitation Hardened Cuni2s+zr Alloys For Rotor Applications
… for precipitation hardening, and determining cold work effect on aging parameters. Two chemistries containing Nickel-to-Silicon ratios of 3.2 and 3.8 were selected for analysis. Cast samples were hot extruded, cold worked, and precipitation hardened. Parameters were varied at each processing …
-
Effect of various deformation processes on the corrosion behavior of casing and tubing carbon steels in sweet environment, The
… mono-diameter wells. Tubular expansion is a cold-drawing metal forming process, which consists of running conical mandrels through casings either mechanically using a piston or hydraulically by applying a back pressure. This mechanism subjects the pipes to large radial plastic deformations of …
-
Effects of thermomechanical pretreatment on abnormal grain growth during simulated carburization, The
… AGG has been shown to be further exacerbated by cold work introduced into the alloy prior to carburizing. Warm and cold work are also sometimes utilized in part forming prior to carburizing. In this study, the effects of warm work and warm work in combination with cold work on austenite grain …
Page 1 of 5