Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 116 for “"combustion behavior"”.
-
Combustion behavior of nano-composite aluminum iron oxide
Bum rates of nano-scale aluminum (Al) powders mixed with iron oxide (Fe2O3) were measured as a function of Fe2O3 synthesis technique and fuel/oxidizer composition. Three reactant synthesis techniques were examined; two focused on sol-gel processing of nano-scale Fe2O3 particles and the third …
-
Combustion behavior of sol-gel synthesized aluminum and tungsten trioxide
… mixed with nano-scale aluminum (Al) and their combustion performance in the form of combustion wave speeds was compared in loose powder and pressed pellet configurations. Results show that both the calcined and non-calcined, aerogel based mixtures outperformed the commercial based mixtures in …
-
Solid Fuel Blend Pyrolysis-Combustion Behavior and Fluidized Bed Hydrodynamics
… involves proper understanding of the co-firing behavior of blended coal-biomass fuels, and proper understanding of advanced gasification systems used for converting such blended fuels to energy. The pyrolysis and combustion behavior of coal-biomass mixtures was quantified by devising laboratory …
-
A comparison of solid fuel ramjet flow characteristics and combustion behavior
… intensity and the reacting flow performance and combustion characteristics of a solid fuel ramjet. The effects of configuration cind air flow changes on the above characteristics were examined. Average regression rates and combustion efficiencies were not significantly affected by changes in …
-
An experimental investigation of the combustion behavior of solid fuel ramjets
… may have a significant effect on the obtainable combustion efficiency and upon the dependence of combustion upon equivalence ratio and air mass flow rate. Combustor pressure oscillations in bypass operation were found to increase regression rates when using PMM fuel grains and to increase or …
-
Combustion Behavior Of Sub-Millimeter Sized Oxygenated And N-Alkane Fuel Droplets
… fire-suppression of untested extinguisher, (b) combustion kinetic model refinement of renewable fuel butanol (C4H9OH) isomers, and (c) directly induced cool flame dynamics of higher n-alkane fuels from an isolated small droplet combustion perspective employing computational fluid dynamics with …
-
Investigation of the laminar and turbulent combustion behavior in a one-cylinder internal combustion engine
This Thesis deals with the analysis of the combustion behavior of a gas-fueled one cylinder internal combustion engine used in a commercially available nail gun (BeA Gasnagler). The main focus was laid on the difference in combustion under laminar and under turbulent conditions, the latter induced …
-
AN EXAMINATION OF THE INFLUENCE OF DISTILLATION ON THE COMBUSTION BEHAVIOR OF APPARENTLY EQUIVALENT SURROGATE FUELS
Use of surrogates to emulate the combustion behaviors of prevaporized real fuels has been widely demonstrated in the literature. However, many combustion applications utilize atomized fuel sprays, and for these configurations, the assumption of fuel property homogeneity in prevaporized fuel …
-
Application of Fuel Element Combustion Properties to a Semi-Empirical Flame Propagation Model for Live Wildland Utah Shrubs
… are mostly based on dry or low-moisture fuel combustion research. To better study live fuel combustion behavior and develop the current semi-empirical bush combustion model, a laminar flow flat-flame burner was used to provide a convection heating source to ignite individual live fuel samples. …
-
Application of light extinction measurements to the study of combustion ins solid fuel ramjets
An experimental investigation of the combustion behavior in solid fuel ramjets was conducted. Light extinction measurements were employed to determine the effects of fuel composition and bypass ratio on the combustion efficiency and the percent and size of unburned carbon. Utility and limitations …
-
Two-Phase Flow Imaging of Sprays Using Laser-Induced Exciplex Fluorescence
… was employed to study the spray formation and combustion behavior of liquid methanol and methanol-ammonia (NH3) gas blends, focusing on phase change, and atomization. LIEF was used to visualize the liquid and vapor phases in sprays created by a high-efficiency nebulizer installed into a …
-
Two-Phase Flow Imaging of Sprays Using Laser-Induced Exciplex Fluorescence
… was employed to study the spray formation and combustion behavior of liquid methanol and methanol-ammonia (NH3) gas blends, focusing on phase change, and atomization. LIEF was used to visualize the liquid and vapor phases in sprays created by a high-efficiency nebulizer installed into a …
-
Two-Phase Flow Imaging of Sprays Using Laser-Induced Exciplex Fluorescence
… was employed to study the spray formation and combustion behavior of liquid methanol and methanol-ammonia (NH3) gas blends, focusing on phase change, and atomization. LIEF was used to visualize the liquid and vapor phases in sprays created by a high-efficiency nebulizer installed into a …
-
Two-Phase Flow Imaging of Sprays Using Laser-Induced Exciplex Fluorescence
… was employed to study the spray formation and combustion behavior of liquid methanol and methanol-ammonia (NH3) gas blends, focusing on phase change, and atomization. LIEF was used to visualize the liquid and vapor phases in sprays created by a high-efficiency nebulizer installed into a …
-
Two-Phase Flow Imaging of Sprays Using Laser-Induced Exciplex Fluorescence
… was employed to study the spray formation and combustion behavior of liquid methanol and methanol-ammonia (NH3) gas blends, focusing on phase change, and atomization. LIEF was used to visualize the liquid and vapor phases in sprays created by a high-efficiency nebulizer installed into a …
-
Two-Phase Flow Imaging of Sprays Using Laser-Induced Exciplex Fluorescence
… was employed to study the spray formation and combustion behavior of liquid methanol and methanol-ammonia (NH3) gas blends, focusing on phase change, and atomization. LIEF was used to visualize the liquid and vapor phases in sprays created by a high-efficiency nebulizer installed into a …
-
Modeling Mixing and Combustion of Opposed Fuel Jets with Experimental Validation
Reliable ignition and combustion behavior of jet fuels under diesel-like conditions are critical challenges for compression-ignition engines, particularly in the case of unmanned aerial systems. When operating at high altitudes and low temperatures, reliable fuel combustion is essential. This …
-
Ignition behavior of diesel and lubricant oil droplets in hydrogen-containing mixtures: rapid compression machine experiments and comparison to natural gas baselines
Hydrogen-fueled internal combustion engines are being actively investigated as a low-carbon alternative for applications where complete electrification remains impractical, particularly in heavy-duty transportation, industrial power systems, and off-road equipment. Despite hydrogen's advantages as …
-
Understanding Failure Modes and High Load Operation in Compression-Ignition Engines With Ducted Fuel Injection
… potential of Ducted Fuel Injection (DFI) as a combustion strategy for reducing emissions from compression ignition (CI) engines. The research investigates the performance, failure modes, and optimization possibilities of DFI through experimental studies conducted in a pressure vessel and an …
Page 1 of 6