Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 272 for “"combustion efficiency"”.

  1. Quantification of Flare Combustion Efficiency through Mid-Wavelength Infrared Spectroscopy

    … dioxide emissions. In the case of incomplete combustion, the flare emits unburned fuel, increasing the greenhouse footprint, environmental damage, and possibly presenting a local hazard. The efficiency with which the hydrocarbons are transformed into carbon dioxide, called the combustion …

    waterloo Repository record for Quantification of Flare Combustion Efficiency through Mid-Wavelength Infrared Spectroscopy (opens in a new tab)

  2. Combustion efficiency in a dual-inlet side-dump ramjet combustor

    … inlets provided improved flammability limits and combustion efficiencies at lean fuel-air ratios when compared to single side-dump performance. Direct injection of approximately 20% of the fuel flow into the dome region was found to provide improved lean flammability limits for the single …

    nps Repository record for Combustion efficiency in a dual-inlet side-dump ramjet combustor (opens in a new tab)

  3. Effect of liquid rocket coaxial fuel injector distributions on combustion efficiency

    … fuel injector patterns, and their effect on combustion efficiency. The Performance/Life Combustion (PLC) Model, a computer program that analyzes gaseous fuel-liquid oxidizer combustion chambers, was used for the study. PLC is a submodel of the liquid rocket motor design code ROCket Combustor …

    ut-knoxville Repository record for Effect of liquid rocket coaxial fuel injector distributions on combustion efficiency (opens in a new tab)

  4. An investigation into a nano-fuel technology combustion enhancer for diesel engines to achieve increased combustion efficiency

    … life would not be possible without the internal combustion engine and the fuel that provides them with the necessary energy. Unfortunately, there are a number of negative side effects to using these engines, such as the harmful greenhouse gases produced by the combustion process as well as the …

    nwu-za Repository record for An investigation into a nano-fuel technology combustion enhancer for diesel engines to achieve increased combustion efficiency (opens in a new tab)

  5. Development Of A Unified Approach (An Index) To Study The Particulate, Carbon Monoxide Emissions And The Combustion Efficiency Using Field And Laboratory Investigations

    … pollutants which are the products of incomplete combustion. Previously, studies have been done to study the PM2.5, CO, methane and non methane compounds to study the dose exposure relationships of the cookstoves. One major drawback in these studies was that they didn’t use the surface area of …

    wustl Repository record for Development Of A Unified Approach (An Index) To Study The Particulate, Carbon Monoxide Emissions And The Combustion Efficiency Using Field And Laboratory Investigations (opens in a new tab)

  6. Co-Firing Biomass with Biogas in Cookstoves with a Fan

    Co-firing is a combustion process in which more than one type of fuel is used. In many cases, co-firing reduces fuel costs and/or reduces the environmental impact. The objective of this research was to test the hypothesis that adding biogas to be co-fired with biomass in a traditional cookstove …

    byu Repository record for Co-Firing Biomass with Biogas in Cookstoves with a Fan (opens in a new tab) Download PDF for Co-Firing Biomass with Biogas in Cookstoves with a Fan (opens in a new tab)

  7. Co-combustion of biomass fuels with coal in a fluidised bed combustor.

    Co-combustion of biomass with coal has been investigated in a 0.15 m diameter and 2.3 m high fluidised bed combustor under various fluidisation and operating conditions. Biomass materials investigated were chicken waste, rice husk, palm kernel shells and fibres, refuse derived fuel and wood wastes. …

    whiterose Download PDF for Co-combustion of biomass fuels with coal in a fluidised bed combustor. (opens in a new tab)

  8. An experimental investigation of the combustion behavior of solid fuel ramjets

    … may have a significant effect on the obtainable combustion efficiency and upon the dependence of combustion upon equivalence ratio and air mass flow rate. Combustor pressure oscillations in bypass operation were found to increase regression rates when using PMM fuel grains and to increase or …

    nps Repository record for An experimental investigation of the combustion behavior of solid fuel ramjets (opens in a new tab)

  9. Reducing environmental impacts of petroleum refining : a case study of industrial flaring

    … have shown that flares are often operated at low combustion efficiency, which exacerbates these air quality impacts. This thesis examines industrial flaring with the objectives of (1) assessing the air quality impacts of flares operating at a variety of conditions, (2) examining the extent to …

    texas Repository record for Reducing environmental impacts of petroleum refining : a case study of industrial flaring (opens in a new tab)

  10. An investigation of the combustion process in solid fuel ramjets

    … into four areas of the solid fuel ramjet combustion process: (1) the effects of near-wall turbulent mixing and equivalence ratio on combustion efficiency, (2) the effects of bypass air on combustion efficiency, (3) the combustion process in a cylindrically perforated fuel grain with a twin …

    nps Repository record for An investigation of the combustion process in solid fuel ramjets (opens in a new tab)

  11. Experimental and Numerical Investigation of Residential Furnace Performance with Blends of Natural Gas and Green Hydrogen

    … average air flow temperature, heat transfer, combustion efficiency, and emission gas analysis for furnaces operating under 15% blends of hydrogen and natural gas. Experimental results indicate that hydrogen addition has the potential to enhance thermal intensity but may lead to decreased heat …

    ecu Repository record for Experimental and Numerical Investigation of Residential Furnace Performance with Blends of Natural Gas and Green Hydrogen (opens in a new tab)

  12. An investigation of the reacting and non-reacting flow characteristics of solid fuel ramjets

    … were burned in a ramjet motor on a thrust stand. Combustion efficiency, regression rate profile and pressures were determined for the reacting flows and compared to pro- files obtained in non-reacting flows for velocity, pressure, and near-wall and centerline turbulence intensity. Near-wall …

    nps Repository record for An investigation of the reacting and non-reacting flow characteristics of solid fuel ramjets (opens in a new tab)

  13. Conceptual evaluation of hydrogen hybrid combustion for heavy-duty engines using CFD modelling

    Hydrogen is a promising fuel for internal combustion engines (ICEs) due to its combustion properties and potential for zero carbon/low nitrogen oxide emissions. This study investigates a novel hydrogen combustion concept for heavy-duty engines using pre-chamber ignition technology operating in a …

    oxford-brookes Repository record for Conceptual evaluation of hydrogen hybrid combustion for heavy-duty engines using CFD modelling (opens in a new tab) Download PDF for Conceptual evaluation of hydrogen hybrid combustion for heavy-duty engines using CFD modelling (opens in a new tab) Embargoed until 2029-08-31

  14. Impacts of Thermal Barrier Coating Morphology and Catalytic Properties on Low Temperature Combustion Engine In-Cylinder Processes

    … Unfortunately HCCI suffers from reduced combustion efficiency and operational variability due to the buildup of carbon deposits. However, the unique thermo-kinetic nature and thermal sensitivity of Low Temperature Combustion (LTC) provides an opportunity to improve combustion efficiency …

    clemson Repository record for Impacts of Thermal Barrier Coating Morphology and Catalytic Properties on Low Temperature Combustion Engine In-Cylinder Processes (opens in a new tab)

  15. Numerical modelling of multiphase flow in raceway of ironmaking blast furnace

    … In the first half of this thesis, the combustion behaviours of coal blends and charcoal are investigated in a pilot-scale test-rig using a three-dimensional computational fluid dynamics (3D CFD) model. The results show that the combustion efficiency of ternary blends is higher than …

    unsw Repository record for Numerical modelling of multiphase flow in raceway of ironmaking blast furnace (opens in a new tab)

  16. The analytical design of a turbo-jet combustion chamber.

    A "can" type combustion chamber was designed using all available proved concepts. A survey of existing designs was made to arrive at a logical design point. The fact that parallel flow would exist within the chamber was noted, and the burner was designed to obtain the required flow within an equal …

    nps Repository record for The analytical design of a turbo-jet combustion chamber. (opens in a new tab)

  17. Experimentally Driven Performance Model for the Baffled-Tube Ram Accelerator

    … the tube wall, as obstructions to attenuate the combustion-driven shock wave system associated with the ram accelerator's propulsive cycle. The device with baffles normal to the wall produces 30-100\% more thrust than the conventional smooth-bore ram accelerator. The attenuation effected by the …

    washington Repository record for Experimentally Driven Performance Model for the Baffled-Tube Ram Accelerator (opens in a new tab)

  18. Methodology and Experiments to Determine Soot and NOx Yields from a Vertical Lab-Scale Flare Burning Alkane-Mixtures and Ethylene

    Species yields and combustion efficiency of lab-scale flares, turbulent non-premixed buoyant flames, were measured. A new facility was constructed allowing gas mixtures to be burned on 38.1 to 76.2 mm diameter flares at flow rates up to 410 standard litres per minute. A methodology was developed to …

    carleton Repository record for Methodology and Experiments to Determine Soot and NOx Yields from a Vertical Lab-Scale Flare Burning Alkane-Mixtures and Ethylene (opens in a new tab)

Page 1 of 14