Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 100 for “"combustion modeling"”.
-
Combustion Modeling in Jet Engine Combustors
In combustion, chemically stored energy is converted into thermal energy in a combustor and this thesis deals with premixed turbulent combustion. This means that fuel is premixed with air prior to the combustor and that the flow entering the combustor is turbulent. The thermal energy released in …
-
Simplified Combustion Modeling of Composite Propellants
… is developed to study the characteristics of the combustion process. The solid composite is a periodic sandwich unit comprised of two oxidizer laminates separated by a fuel binder layer. Included in the model are essential features for simulating composite propellant combustion: (1) a free surface …
-
Scramjet combustion modeling using eddy dissipation model
… the Eddy Dissipation Model (EDM) to describe the combustion process inside an open-access Computational Fluid Dynamics (CFD) solver. Typical CFD modeling approaches for turbulent supersonic reacting flows are associated with a high computational cost. This in turn inhibits the use of CFD in …
-
Bipropellant spray combustion modeling in small rocket engines
<p>A CFD-based model for bipropellant spray combustion in small rocket engine combustors is formulated and developed into a predictive computational tool. This model is comprised of a two-component interacting liquid phase imbedded within a turbulent chemically reactive gas. A self-consistent …
-
Leading points concepts in turbulent premixed combustion modeling
… that modifications in the overall turbulent combustion speed depend solely on modifications of the burning rate at the leading points since an increase (decrease) in the average propagation speed of these points causes more (less) flame area to be produced behind them. In this framework, …
-
A simplified approach to condensed phase combustion modeling
The combustion modeling of energetic materials still involves a guessing step due to the lack of knowledge in the condensed phase. Quantum dynamical calculations are presently the only way to predict the initial gasification reaction but require tremendous computing power, thus limiting their …
-
Turbulent Combustion Modeling of an Ejector Ramjet Propulsion System
… preheating the fuel jet using heat released from combustion. However, first the computation model is assessed for several combustion-related problems relevant to an ejector ramjet: a one-dimensional laminar flame, a three-dimensional bluff-body stabilized flame, and a ramjet with the AIS operating …
-
Sub-grid Combustion Modeling for Compressible Two-Phase Flows
A generic formulation for modeling the sub-grid combustion in compressible, high Reynolds number, two-phase, reacting flows has been developed and validated. A sub-grid mixing/combustion model called Linear Eddy Mixing (LEM) model has been extended to compressible flows and used inside the …
-
Parametric combustion modeling for ethanol-gasoline fuelled spark ignition engines
… a simple and accurate ethanol-gasoline blends combustion model that is applicable to one-dimensional engine simulation. A parametric combustion model has been developed, integrated into an engine simulation tool, and validated using SI engine experimental data. The parametric combustion model …
-
Combustion Modeling of RDX, HMX and GAP with Detailed Kinetics
… steady-state numerical model of the combustion of homogeneous solid propellant has been developed. The combustion processes is modeled in three regions: solid, two-phase (liquid and gas) and gas. Conservation of energy and mass equations are solved in the two-phase and gas regions and …
-
Combustion modeling with conditional source-term estimation and laminar flamelet decomposition
Conditional source-term estimation with laminar flamelet decomposition has been utilized to model the mean chemical source term in a predictive RANS simulation of two different problems. With this model, integral equations relating the unconditional mean temperature and species fields to the …
-
Engine spray combustion modeling using unified spray model with dynamic mesh refinement
… of this study is to improve the spray and combustion modeling of internal combustion engines using dynamic mesh refinement. The first part of the study used advanced spray models with a dynamic mesh refinement scheme to simulate atomization of gasoline and diesel sprays. Traditionally …
-
Combustion modeling using conditional source-term estimation with flamelet decomposition and low-dimensional manifolds
Combustion modeling is performed with Conditional Source-term Estimation (CSE) using both Laminar Flamelet Decomposition (LFD) and Low-dimensional Manifolds. CSE with Laminar Flamelet Decomposition (LFD) is used in the Large Eddy Simulation (LES) context to study the non-premixed Sandia D-flame. …
-
Combustion modeling for virtual SI engine calibration with the help of 0D/3D methods
… of virtual methods. In this work a physical 0D combustion model is set up, which can cope with a new generation of spark ignition engines. Therefore, at first cylinder thermodynamics are modeled and validated in the whole engine map with the help of a real-time capable approach. Afterwards an up …
-
Predictive Zero-Dimension Combustion Modeling in Internal Combustion Engines with Residual Fraction and Exhaust Gas Recirculation
… energy sources. In the context of internal combustion engines (ICEs), this shift requires an understanding of how alternative fuels, such as biodiesels, differ in combustion characteristics compared to traditional fossil fuel. This thesis builds upon existing combustion modeling in ICEs by …
Page 1 of 5