Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 98 for “"compatibilizers"”.
-
Influence of compatibilizers and liquid crystal polymers upon polypropylene blends.
… copolyesters have been investigated. Two compatibilizers (PP-g-AA and PP-g-MA) were selected for these incompatible blends of PP with liquid crystal polymers (LCPs) to improve interfacial properties. Blends were prepared using a single-screw extruder with mixing head. These immiscible …
-
Development of Polyethylene-based Compatibilizers to Enhance the Recyclability of Waste Polymer Blends
… separated polymer blends. To overcome this, compatibilizers have emerged as a potential alternative to current mechanical recycling strategies. Compatibilizers are additives that enhance blend miscibility by lowering interfacial tension and reducing the droplet coalescence that occurs when …
-
Novel functionalized polyolefins as compatibilizers in polyolefin/polyamide 6 blends and polyethylene/metal hydroxide composites
… onto polyolefins and elastomers to produce new compatibilizers for polymer blends. Effects of initial monomer and peroxide concentrations on the degree of grafting, on the amount of residual monomer, and on the side reactions were investigated. Reactive compatibilizers could be prepared with a …
-
Reducing Data Requirements in Polymer Science: Deep Neural Networks For Predicting Surface Tension of Copolymer Compatibilizers
… structures and weak me- chanical properties. Compatibilizers improve miscibility and reduce interfacial tension, which is critical for applications such as mixed-waste polymer recycling. Sequence-controlled polymers offer unique potential by combining the tunable chemistry of synthetic …
-
Fully bio-based polymer blends: optimization of processing aspects and influence of compatibilizers. Development of strategies to properties improvement
L'abstract è presente nell'allegato / the abstract is in the attachment
-
Improving Polymer Recycling Through Understanding Passive Compatibilization of Semicrystalline Polymer Blends from Waste Streams
… in the melt during mechanical recycling. Compatibilizers can be added to the melt to stabilize the interface between immiscible polymer blends. While the important molecular-level interactions of effective compatibilizers for blends composed solely of amorphous polymers are well …
-
Multiblock Copolymers for Compatibilizing and Recycling Polyesters and Polyolefins
… To tackle this recycling challenge, effective compatibilizers are needed to decrease domain sizes, increase interfacial adhesion, and thus improve the mechanical properties of recycled blends. In this thesis, we will focus on using multiblock copolymers (MBCPs) as compatibilizers to assist …
-
Compatibilizing Polymer Blends Using Reactive Telechelic Oligomers and Copolymers
… provides a mechanism by which blocky copolymeric compatibilizers can be formed during processing, as demonstrated by the changes in the mechanical and optical properties of the phase separated polymer blends. The results also show, however, that the presence of unreacted smaller oligomers can act …
-
Development of Bloodmeal Protein Thermoplastic Blends
… hand, was much more challenging. It required two compatibilizers, added at different stages of blending to produce a compatible blend. For blends with PLA, a novel copolymer, itaconic anhydride grafted PLA (PLA-g-IA) was produced to be used as a compatibilizer and initial results suggested that …
-
The blending and permeability of polymers for packaging applications
… and oxygen barrier properties. The effect of compatibilizers on phase dispersion has been investigated using three commercial Polybond's, PB3002, PB1001, and PB3009. Three compatibilizers prepared in-house were also used as, maleic anhydride(MA) grafted on PP, MA and butyl methacrylate(BMA) …
-
Incorporating Recycled Plastics in Asphalt Binders and Mixtures
… towards the warmer side. The development of compatibilizers mitigated the drawbacks caused by incorporating recycled low-density polyethylene (rLDPE) in asphalt binder. Compatibilizers with polyisoprene (PI) and polybutadiene (PBD) backbones synthesized with polyethylene-block-polyethylene …
-
Development of Compatibilization Approaches for Biodegradable Polymeric Blends and Biocomposites through Reactive Extrusion for Packaging Applications
… immiscible biopolymers or to develop novel compatibilizers for biodegradable systems. The resulting materials were processed through injection molding, cast extrusion, and film blowing, and thoroughly characterized to assess performance improvements. The initial study examined in situ …
-
Cost-effective processing of immiscible polymer blends into value-added fiber-based products
… for materials separation or the use of expensive compatibilizers for improving mechanical properties. A simple method for direct reuse of waste plastics without the pre-separation procedure or the compatibilizer will be beneficial for efficient and cost-effective recycling. This emerging need …
-
Rice straw fiber polymer composites: thermal and mechanical performance
… of different rice straw components, and compatibilizers on various properties of rice-straw based polymer composites were also investigated. Rice straw fibers can work well with both VHDPE and RHDPE as reinforcing filler. Also, different components of rice straw had no significant …
-
Optimization of immiscible polymer blends compatibilized with multiblock copolymers
… have been hypothesized to be effective compatibilizers. The first part of this project involved synthesizing multi block copolymers with alternating blocks of styrene and methyl methacrylate. Triblock, pentablock, and heptablock multiblock copolymers were synthesized by atom transfer …
-
Compatibilization of Immiscible Polymer Blends Using Graft Block Copolymers
… this problem is by incorporating block copolymer compatibilizers into immiscible polymer blends, either directly (non-reactive) or generated in situ (reactive) during blending. Compatibilization reduces interfacial tension to stabilize the morphology and enhances interfacial adhesion. Graft block …
-
Fracture Mechanics of Nanostructured Polymer Blends with Janus Particles
… JPs were prepared and successfully employed as compatibilizers in technologically relevant poly(2,6- dimethyl-1,4-phenylene ether)/poly(styrene-co-acrylonitrile) (PPE/SAN) blends. The obtained small PPE droplet sizes of less than 300 nm (at 10 wt.% JPs in the blend) greatly outperformed the …
-
Manufacture and characterization of natural fiber biocomposites for automotive application
… composites were prepared with three different compatibilizers and their thermomechanical, morphological, and water absorption properties were characterized. The compatibilizers had significant improvement on the tensile, flexural strengths, and water absorption; however, no considerable effect …
-
Reactive polymer processing techniques for mechanically and chemically recycling plastic waste
… mechanism proposed for preformed copolymer compatibilizers. It was found that compatibilization using HOPEOH reactive additives was more efficient when using a mixing procedure that favored the preformation of block copolymer compatibilizers, thus supporting a threading-the-needle mechanism …
Page 1 of 5