Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 285 for “"compression test"”.
-
Split-platen compression test: development and use
Includes bibliographical references (pages 88-90).
-
Application of Diametral Compression Test to Evaluation of Dentin-Adhesive Interface Bond Strength
Bond strength test is crucial for evaluation of dentin-adhesive effectiveness and for informing the design of adhesive systems. Conventional bond strength techniques have limitations with respect to accuracy and suffer from large variability. Diametral compression test is an alternative approach …
-
Dynamic recrystallization of boron doped Ni₃Al polycrystal during high temperature compression test
Thesis (M.S.)--Michigan State University. Department of Metallurgy, Mechanics and Materials Science, 1989
-
Assessing Viscoelastic Properties of Polydimethylsiloxane (PDMS) Using Loading and Unloading of the Macroscopic Compression Test
… properties were measured using custom-built compression test device. PDMS elastic modulus can be varied with the elastomer base to the curing agent ratio, i.e. by changing the cross-linking density. PDMS samples with different crosslink density in terms of their elastic modulus were measured. …
-
Anomalous Eutectic and Nanolaminated Composites of Mg-Al Alloys: Microstructure and In-Situ Compression Test
… were examined by the in-situ SEM microcompression test; the layered and fibrous eutectics. It was shown that the combination of mechanical properties of nanolaminated composite was superior to that of fibrous eutectic and pure Mg. The reason was attributed to the high interfacial area …
-
An evaluation of the triaxial compression test for the determination of the shear strength of soils
… of the soil, The two most generally accepted tests for evaluating the shearing resistance of soils area 1. the direct shear test which measures the shearing resistance directly and 2. the triaxial compression test which determines the shearing strength of a cylindrical specimen- of soil by …
-
The Application of Distributed Optical Sensing to Measure the Full-Field Strain Response of Uniaxial Compression Test Specimens
The uniaxial compressive strength (UCS) test is crucial in determining the strength and stiffness behaviour of intact rock and is frequently utilized by industry to determine project site characteristics. A fundamental component of UCS testing is measuring the strain response of test specimens. …
-
Polydimethylsiloxane Mechanical Properties Measured by Macroscopic Compression and Nanoindentation Techniques
… crosslinking) is studied. Reliable macroscopic compression test instrument was developed. Preload method was applied for the nanoindentation flat punch test to develop full contact. In chapter 2, an easy instrument setup for macroscopic compression test is described. A series of PDMS samples …
-
Determination of Cap Model Parameters using Numerical Optimization Method for Powder Compaction
… model involves a procedure known as a triaxial compression test. Equipment for completing a triaxial compression test on metal powders is neither readily available nor standardized in the P/M industry. A robust calibration procedure that requires only simple experimental tests would increase the …
-
Sustainable building materials and systems
… line of a contingency base constitutes its greatest vulnerability. The reliance of a base on supply line can be reduced through maximum use of locally available construction materials and resources. The objective of this work is to make efficient use of indigenous materials should still provide …
-
Development of a constrained piston method for compression testing of carbon foams
… purpose of this study is to develop a standard compression test for gathering mechanical strength properties, namely yield stress, modulus, and energy absorption all during a single compression test. Several carbon foams were tested using both the novel constrained method (developed herein) and …
-
Estimation of compressive load bearing capacity of helical piles using torque method and induced settlements
… to determine the load capacity such as loading tests and in situ tests (i.e. SPT, CPT and LCPC) are not economically feasible for the small scaled constructions, for which helical piles are generally recommended. In order to estimate the ultimate load that helical piles can carry, torque method …
-
Triaxial Behaviour of Layered Soil at Small Strain Level
… study extended Vaid’s work (1971) to conduct K0-compression tests in a rigid triaxial cell with a flexible lateral boundary for the determination of the K0-value of normally consolidated soil. The error induced by the compliance of the cell-water system that always existed in the previous study …
-
CHARACTERIZATION FRAMEWORK FOR BOND MECHANICS AT THE MINERALIZED TISSUE – ADHESIVE INTERFACE
… performance is evaluated by the bond strength tests, such as the micro-tensile test. The conventional bond strength tests suffer from large variations in the test results. They are also not capable of monitoring the local failure mechanisms. These challenges limit their ability to effectively …
-
Elastic Properties, Strength and Damage Tolerance of Pultruded Composites
… and transverse to the pultrusion direction, were tested in tension, 3-point flexure, and 4-point flexure. A 2-parameter Weibull model was applied to predict the tensile strength from the flexure tests. The measured and Weibull-predicted ratios did not show consistent agreement. Microstructural …
-
Modeling of Particle Media Using the Discrete Element Method (DEM)
… of granular materials subjected to laboratory tests. The goal of this study is to develop a methodology to calibrate the DEM input micro-parameters to accurate reproduce the meso-mechanical behaviors of granular materials subjected to controlled test conditions then apply to the in-situ …
-
Investigation of Surface Topology Effects on Metal Flow of Aluminum and Steel During Hot Compression
… and the friction factor under lubricated hot compression. 6061-T6 aluminum and AISI 1018 steel rings and rectangular bar stock workpieces were compressed on H-13 tool steel platens of varying roughnesses ranging from Ra 0.25 – 6.1 µm (10 – 240 µin). Each platen was machined in such a way to …
-
Concurrent engineering of a curing process for composites: carbon/epoxy woven fabric hollow cylindrical tube
… of hollow cylindrical tube was presented. 3. A compression test was performed to compare the load of tubes that were made by curing, postcuring, and two-step curing process.
-
Nedrenuoto kerpamojo stiprio verčių palyginimas taikant triašį ir vienaašį gniuždymo metodus /
… by two common laboratory methods: the Unconfined Compression Test (UCT) and the Unconsolidated Undrained (UU) triaxial compression test. The aim of the work is to evaluate and compare the cu values obtained from these methods, to describe in detail the (UU) test methodology based on practical …
-
Using finite element analysis of retroreflective raised pavement markers to recommend testing procedures for simulating their field performance
… the RRPMs is the lack of appropriate laboratory testing standards that can test the adequacy of the RRPMs to perform in field conditions. There is a need to modify the existing standards or develop new testing procedures that can better simulate field conditions. This requires identifying …
Page 1 of 15