Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 35 for “"compressive creep"”.
-
Compressive Creep of Porous Gamma Phase Uranium Metal
The compressive deformation behavior of unirradiated depleted gamma phase uranium metal was investigated in support of new metal fueled fast reactor designs. Extended core residence times have raised questions about long term fuel performance under stress and at high temperatures. To enable this …
-
Compressive Creep of a Lightweight, High Strength Concrete Mixture
… time dependent, inelastic deformation called creep. Creep without moisture loss is referred to as basic creep and with moisture loss is referred to as drying creep. Shrinkage is the combination of autogeneous, drying, and carbonation shrinkage. The combination of creep, shrinkage, and elastic …
-
Compressive Creep of Prestressed Concrete Mixtures With and Without Mineral Admixtures
… and a slow inelastic deformation called creep. Creep of concrete is composed of two components, basic creep, or deformation under load without moisture loss and drying creep, or deformation under drying conditions only. Deformation of concrete in the absence of applied load is often …
-
The compressive creep and load relaxation properties of a series of high aluminium zinc-based alloys
… and aluminium alloy LM25 were investigated for compressive creep and load relaxation behaviour under a series of temperatures and stresses. A compressive creep machine was designed to test the sand cast hollow cylindrical test specimens of these alloys. For each compressive creep experiment the …
-
A study of high temperature tension and compression creep behaviour
… 105. To enable a systematic understanding of the creep curves produced experimentally, the theory of creep in two-phase alloys is reviewed, and in view of the high test temperatures involved, an examination is included of the time dependent changes occurring in two-phase systems produced by …
-
Study on The Thermal Properties of Concrete Containing Ground Granulated Blast Furnace Slag, Fly Ash and Steel Reinforcement
… the second type contained Class F fly ash. The compressive and splitting tensile strength, static elastic modulus, thermal conductivity, adiabatic temperature rise, shrinkage, and compressive creep of the two concretes were measured. Then, the experimental shrinkage and compressive creep results …
-
Determing the Effect of Thermal Treatment Timing on Ultra-High Performance Concrete Beams
… complex due to the interaction of concrete creep, concrete shrinkage, and steel relaxation. Implementing advanced materials such as ultra-high performance concrete (UHPC) further complicates the estimation of prestress losses because of the changes in material models dependent on curing …
-
Investigation of Concrete Mixtures to Reduce Differential Shrinkage Cracking in Composite Bridges
… shrinkage by decreasing shrinkage and increasing creep. . In addition, the amount of tensile creep that concrete experiences under long-term tensile stresses were quantified and compared to compressive creep values in order to gain a better understanding of how concrete behaves under tension. Test …
-
Predicting Long-Term Creep Behavior Using Short-Term Stress Relaxation Data in Expanded Polyethylene Foam
… these foams can be subjected to sustained compressive stresses (13.78 - 36.20 kPa), depending on density and application, leading to time-dependent deformation (creep). Creep reduces cushioning performance, making its understanding critical for effective protective packaging. Two standards, …
-
Damage characteristics of brittle rocks inside the pre-failure range: numerical simulation and lab testing
… analyzed theoretically and numerically. Uniaxial compressive creep tests for Lac du Bonnet granite were simulated and time-dependent behavior in terms of the damage process during primary, secondary and tertiary creep until final failure characterized by macroscopic fracturing was discussed in …
-
Development, characterization and creep resistance of cubic zirconia doped with rare earth oxides processed through spark plasma sintering
… requirements of the system. Fabrication of creep-resistant ceramic materials is currently receiving worldwide interest due to their potential use in solid oxide fuel cells, thermal barrier coatings and insulators for hostile environments. In this research a novel fabrication process, Spark …
-
Experimental characterization of the mechanical consequences of a debonded total hip stem with an unsupported distal tip
… of Simplex P bone cement were subjected to compressive creep tests. Second, polished, tapered, cemented stems were implanted in cadaveric femora and subjected to physiologic loads. During loading, cement mantle hoop strains and axial displacement of the stem within the cement mantle were …
-
The creep properties of a series of zinc-rich zinc-aluminium alloys
The compressive creep behaviour of six sand cast zinc-rich alloys: No3 and No5, corresponding to BS 1004A and BS 1004B, respectively, alloy No2, ILZRO,.16 and two newer alloys ACuZinc5 and ACuZinc10 was investigated. The total creep contraction of the alloys was found to be well correlated using an …
-
Creep of compacts of colloidal boehmite (A100H) during dehydroxylation
A compressive creep study of cold compacted colloidal boehmite has been carried out during the dehydroxylation reaction. The creep tests were made as a function of temperature, applied stress and the relative density of the cold compact. The activation energy for creep has been found to be 9.1 ± …
-
Creep behavior and physical characterization of fusion-cast alumina refractories
… spall resistance. Yet, published engineering creep and high temperature modulus of elasticity data are essentially nonexistent for commercial refractories used in such applications in the glass industry. Results from research at the University of Missouri--Rolla and Oak Ridge National …
-
Analysis Of Pellet-Cladding Mechanical Interaction On U3Si2 Fuel With A Multi-Layer SiC Cladding Using Bison
… these material models is a preliminary thermal creep model for U3Si2 based off of recent compressive creep data. In addition to the fuel performance analysis, due to the brittle nature of the monolithic SiC layer that surrounds the cladding, an in depth analysis on stresses in the cladding is …
-
Bison Simulation-Based Identification of Important Design Criteria for U3SI2 Fuels With Composite-Monolithic Duplex Sic Cladding
… not well understood. One such property, thermal creep of U3Si2, is an important contributing factor to U3Si2’s viability as an ATF. No experimentally derived thermal creep model is published for U3Si2, and previous analyses of compressive thermal creep experimental data lack statistical means of …
-
Short-Term Creep Properties of Commercial Dentin Bonding Resins
The compressive creep and recovery of five dentin adhesive resins. (All-Bond 2, Amalgambond Plus. ProBOND. Pertac Universal Bond. Scotchbond 2) chosen from commercial dentin bonding systems were examined in this study. Cylindrical specimens. 8.0 ± 0.1 mm in height and 8.0 ± 0.1 mm in diameter, were …
Page 1 of 2