Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 35 for “"concrete pipe"”.
-
Concrete pipe
Thesis (B.S.)--Michigan State College of Agriculture and Applied Science, 1928
-
Behavior and design of buried reinforced concrete pipe
Reinforced Concrete Pipes (RCP) are in used in the United States for almost a century. There are two methods of designing RCP, the indirect design which is an empirical method started at the beginning of the twentieth century, and the direct design method which is a more engineering oriented method …
-
The Performance of Reinforced Concrete Pipe Joints under Differential Ground Settlement
Leakage from reinforced concrete pipe joints has negative environmental impacts and can compromise the sewer or culvert’s service life. Pipes can fracture, corrode, rotate, experience joint pullout, and potentially undergo damage during their installation – leading to leakage into or out from the …
-
Factors Affecting the Load Distribution on Buried Concrete Pipe under Shallow Fill Heights
… into the behavior of shallow buried pipe. The reason for this is that no analytical methods previously available could properly simulate the complexities of the soil-pipe structure. Nearly all previous investigators assumed that the soil-pipe system behaved in a linear, elastic …
-
Cementitious Liners in Reinforced Concrete Pipes
… the performance of damaged reinforced concrete pipes with a focus on developing design approaches to examine the required thickness of cementitious liners to restore strength to resist earth and vehicle loads. Design seeks to prevent the development of additional cracking within the …
-
Behaviour of Deteriorated Pipes Rehabilitated With Grouted Slipliners
… of both deteriorated steel and reinforced concrete culverts rehabilitated with grouted slipliners subjected to surface loading. Bench scale experiments were conducted to evaluate the use of fibre optic sensors against conventional strain sensors. Then, fibre optic sensors were attached to a …
-
Decision-Making Guidance for Selecting Culvert Renewal Techniques
… shotcrete (RS), slip lining (SL), cured-in-place pipe (CIPP), fold and form lining (FFL), spiral-wound lining (SWL), centrifugally cast concrete pipe lining (CCCP), and pipe bursting (PB). These techniques are appropriately mapped with the commonly observed defects in reinforced concrete pipe …
-
Soil Interaction Effects of Buried Adjacent Cylinders
… investigated. Specifically, the study focuses on concrete pipe, a type of buried cylinder. A general investigation of the soil-interaction effect of buried single pipes is conducted. The main emphasis, however, is on the behavior of twin pipe configurations and the load distributions on the pipe. …
-
Application and Evaluation of Non-Destructive Testing Methods for Buried Pipes
… assessment methods for both cast iron water pipes and large diameter sewer and culvert systems. A state-of-the-art review of Non-destructive Testing (NDT) technologies available for cast iron water pipes and corrugated steel culverts identified the strengths and weaknesses of each technology. …
-
Sulfuric acid resistance of fly ash mortar
Crown corrosion of concrete pipe and its subsequent repair is a topic much discussed in recent years. Present protective methods have not worked effectively. Due to its properties and its low cost, fly ash was used as a cement replacement of mortar to investigate its sulfuric acid resistance. …
-
EVALUATING INFRASTRUCTURE PERFORMANCE TO ASSIST FACILITY MANAGEMENT TOWARD SUSTAINABLE SYSTEMS
… system are performed comparing three different pipe types, which are reinforced concrete pipe (RCP) and non-reinforced concrete pipe (NRCP), and vitrified clay pipe (VCP). Life cycle cost analysis is performed for material extraction, construction and rehabilitation phases. In the rehabilitation …
-
Numerical analysis and laboratory test of concrete jacking pipes
Pipe jacking is a trenchless construction technique for the installation of underground pipelines. Although pipe jacking is widely used, fundamental research is still needed to understand fully the factors affecting the process and to prevent unexpected failure. With the time and financial …
-
Soil Interaction Effects of Dual Pipe Systems
In this study the interaction effects of dual pipe systems are investigated. The study focuses on concrete pipe buried under large fill heights. An investigation is made of various methods of analysis. The main purpose of this report, however, is to study the behavior of two pipe systems. A …
-
Feasibility of active vision for inspection of continuous concrete pipes.
… a mobile robot to improve survey techniques for concrete and clay sewers of less than 1m diameter. Software and hardware components of a prototype mobile remote visual sensing system have been designed and developed. The active vision system (AVS) operates within smooth-walled small-bore pipes …
-
Behaviour and Design of Reinforced Concrete Pipes
… Design methods currently used for reinforced concrete pipe are able to accurately predict the capacity of the pipe, to identify discrepancies between the two methods, and to provide potential modifications to the methods to reduce inconsistencies. As part of this investigation, two 0.6 m pipes …
-
Development and Influence of Erosion Voids at Rigid Pipe Joints
… that erosion voids forming at leaky reinforced concrete pipe joints have on the pipe response to surface loading. The experiment consisted of a jointed system of two 825 mm inner diameter reinforced concrete pipes, buried in a uniform sand. A section of the pipe joint was left unsealed to allow …
-
The Chemo-Mechanical Characterization of the Long-Term Performance of Glass Fibre Reinforced Cured-in-Place Pipe Liners
… for a glass fibre reinforced cured-in-place-pipe (CIPP) liner to evaluate its performance and assess its chemical durability. The test matrix involves two chemical and two mechanical tests, performed in parallel to draw connections between mechanical performance and characteristics of the …
-
Ground displacements and pipe response during pulled-in-place pipe installation.
Polymer pipes, typically high density polyethylene (HDPE), can be pulled-into-place, avoiding traditional cut-and-cover construction, using pipe bursting and horizontal directional drilling (HDD) pipe installation techniques. Of particular interest, are the ground displacements, induced by cavity …
-
Response of Reinforced Concrete and Corrugated Steel Pipes to Surface Load
… frame on 600-mm-inner-diameter reinforced concrete pipe (RCP) and corrugated steel pipe (CSP) when buried in dense, well-graded sand and gravel. Measurements of the RCP at nominal and working forces and beyond are reported for 0.3, 0.6 and 0.9 m of soil cover above the pipe crown. The RCP …
-
Performance of Trenchless Rehabilitations for Culvert, Sewer, and Maintenance Hole Structures
… the immediate backfill) on steel and reinforced concrete pipe behaviour. Additionally, the voids were rehabilitated using simple trenchless solutions and the impact on pipe capacity was explored. Furthermore, rehabilitation is also commonly performed on access structures (i.e. maintenance holes) …
Page 1 of 2