Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 265 for “"constant-load"”.

  1. Experimental procedures for lifetime testing or graphite bundles under constant load

    … for lifetime testing of graphite bundles under constant load. The attributes of the experiment are expedience in implementation and a substantial accumulation of information equivalent to a large number of single filament tests. To achieve the objectives of the experiment a specially adapted …

    nps Repository record for Experimental procedures for lifetime testing or graphite bundles under constant load (opens in a new tab)

  2. Neuromuscular Fatigue and Biomechanical Alterations during High-Intensity, Constant-Load Cycling

    … to reach task failure during high-intensity, constant-load cycling. In conclusion, the findings presented in this thesis indicate that the temporal patterns of central and peripheral neuromuscular fatigue differ (Study 1; Chapter 3). Task failure during high intensity cycling appears to be …

    edithcowan Repository record for Neuromuscular Fatigue and Biomechanical Alterations during High-Intensity, Constant-Load Cycling (opens in a new tab)

  3. Cracking of zirconium alloys at constant load with and without applied potentials

    … temperature and 90°C. For SCC testing, constant load and slow-strain-rate techniques were used. Some SCC testing were also performed under controlled electrochemical potentials (Econt). The localized corrosion behavior was studied by cyclic potentiodynamic polarization technique. …

    unlv Repository record for Cracking of zirconium alloys at constant load with and without applied potentials (opens in a new tab) Download PDF for Cracking of zirconium alloys at constant load with and without applied potentials (opens in a new tab)

  4. Development of a micro-depth sensing indentation technique with constant load control

    … modulus can be obtained based on the initial unloading stiffness of the load-depth curve. The accurate load and displacement measurement as well as high precision position control of the indenter are needed to achieve the required measurement resolution. The application of PZT actuator is often …

    wvu Repository record for Development of a micro-depth sensing indentation technique with constant load control (opens in a new tab)

  5. Effects of chronic suboptimal energy intake on constant-load exercise in young women

    … of energy below recommended levels on constant-load exercise was studied in women age 19-24 years. Ten controls (average caloric intake ~ 35 kcal/kg body weight) and 10 subjects with suboptimal energy intake (average caloric intake - 25 kcal/kg body weight) were matched for age, …

    vt Repository record for Effects of chronic suboptimal energy intake on constant-load exercise in young women (opens in a new tab)

  6. Investigation of indentation derived creep response using constant load and constant strain rate methods

    … Indentation derived creep response using constant load-hold and constant indentation strain rate methods were investigated through systematic numerical finite element analysis of conical indentation. The model system of pure tin (Sn) and Sn-based alloy with known uniaxial power-law creep …

    unm Repository record for Investigation of indentation derived creep response using constant load and constant strain rate methods (opens in a new tab)

  7. Combustion and emission performance of a syngas-diesel dual-fuel generator under constant load

    … syngas-diesel dual-fuel generator under constant load conditions. This is achieved by varying syngas flow rates and composition, and optimizing direct injection (DI) strategies and exhaust gas recirculation (EGR) rate. The unique aspect of this research is that experiments were performed …

    manitoba Repository record for Combustion and emission performance of a syngas-diesel dual-fuel generator under constant load (opens in a new tab)

  8. AN EVALUATION OF LACTATE AND RESPIRATORY RESPONSES TO INCREMENTAL AND CONSTANT LOAD WORK BOUTS.

    … subjects participated in two incremental work load (IWL) and four constant work load (CWL) tests that consisted of horizontal treadmill running at different speeds. The IWL tests elicited linear increases in VO₂ and were highly correlated for both Group 1 (r = .986) and Group 2 (r = .999). …

    arizona-thes Repository record for AN EVALUATION OF LACTATE AND RESPIRATORY RESPONSES TO INCREMENTAL AND CONSTANT LOAD WORK BOUTS. (opens in a new tab)

  9. Physiological and Metabolic Responses to Constant-Load Exercise on an Inclined Stepper and Treadmill

    … inclined stepper by StairMasterTM (SM) during constant-load exercise. The slow component of VO2 (SC) was a central variable assessed during exercise. Twenty-two healthy college-aged (18-30) subjects completed an incremental TM and SM exercise test to establish a workload equivalent to 70% …

    vt Repository record for Physiological and Metabolic Responses to Constant-Load Exercise on an Inclined Stepper and Treadmill (opens in a new tab)

  10. Effect of drop-style and triathlon handlebar positioning on oxygen consumption during constant load cycling

    … male non-cyclists performing a series of four constant-load cycling trial sessions (five minutes each trial for three consecutive trials per session) in different position I workload configurations. The trial sessions were performed in both a low gear-ratio and high gear-ratio, each at a …

    ttu Repository record for Effect of drop-style and triathlon handlebar positioning on oxygen consumption during constant load cycling (opens in a new tab)

  11. Determining optimal load for a constant-load cycle ergometer test relative to isotonic leg strength

    … 363±15, 413±19, 465±19, 520±21, and 460±41 for loads 6 to 10 % 1RM respectively. Similar results were reported for AP. The differences in PP for loads between 8 and 10 % 1RM were statistically different. Results show that PP varies based on loads of % 1RM and the optimal range is between 8 and …

    vt Repository record for Determining optimal load for a constant-load cycle ergometer test relative to isotonic leg strength (opens in a new tab)

  12. Creep Rupture Properties of Tin Tested at Constant Stress

    … of a simple, relatively pure, material at constant stress as compared to that tested at constant load. Tin was selected for the investigation. A series of creep tests were run to rupture at constant stress and constant load. The test variables were adjusted in these tests so that time to …

    maryland Repository record for Creep Rupture Properties of Tin Tested at Constant Stress (opens in a new tab)

  13. Evaluating the physiological and perceptual responses to inspiratory muscle training in males and females

    … inspiratory pressure (MIP), with weekly workload adjustments. Before and after training, participants completed pulmonary function testing, MIP assessment, incremental and constant-load exercise tests, and ratings of dyspnoea intensity and unpleasantness (modified Borg CR10 scale). Two-way …

    manitoba Repository record for Evaluating the physiological and perceptual responses to inspiratory muscle training in males and females (opens in a new tab)

  14. Assessment of alloy 709 accelerated creep properties for use in sodium cooled fast reactors

    … from temperatures ranging from 550 to 650 °C. Constant load creep, stress dip, and stress relaxation tests were carried out to determine the minimum creep rate exponent and activation volume, as well as the activation energy of creep and stress relaxation. Constant load creep tests were …

    colo-mines Repository record for Assessment of alloy 709 accelerated creep properties for use in sodium cooled fast reactors (opens in a new tab)

  15. Environment Assisted Cracking of Target Structural Materials Under Different Loading Conditions

    … smooth and notched cylindrical specimens under constant load and slow strain rate (SSR) conditions. C-ring and U-bend specimens have also been tested for stress corrosion cracking evaluation in the acidic solution. The role of hydrogen on the cracking tendency has been evaluated by cathodic …

    unlv Repository record for Environment Assisted Cracking of Target Structural Materials Under Different Loading Conditions (opens in a new tab) Download PDF for Environment Assisted Cracking of Target Structural Materials Under Different Loading Conditions (opens in a new tab)

  16. Cracking of Zircaloy-4 in acidic solution under controlled potentials

    … at ambient and elevated temperatures by using constant-load and slow-strain-rate (SSR) testing techniques. Since the cracking susceptibility of Zr-4 may be influenced by electrochemical potential resulting from the repository environment, SCC testing has been performed under anodic and cathodic …

    unlv Repository record for Cracking of Zircaloy-4 in acidic solution under controlled potentials (opens in a new tab) Download PDF for Cracking of Zircaloy-4 in acidic solution under controlled potentials (opens in a new tab)

  17. Stress Corrosion Cracking Resistance of Martensitic Stainless Steels for Transmutation Applications

    … at ambient and elevated temperatures using constant load and slow strain rate testing (SSR) techniques. C-ring and U-bend specimens have also been tested in the acidic solution. The effect of hydrogen on the cracking susceptibility has been evaluated under controlled cathodic potential. …

    unlv Repository record for Stress Corrosion Cracking Resistance of Martensitic Stainless Steels for Transmutation Applications (opens in a new tab) Download PDF for Stress Corrosion Cracking Resistance of Martensitic Stainless Steels for Transmutation Applications (opens in a new tab)

  18. A simulator study of the horizontal landing characteristics and piloting techniques for manned re-entry gliders

    … of a steady glide final approach, a nearly constant load factor flare maneuver, and a 15 to 20 second shallow angle, final glide was the preferred technique. The vehicle parameters found to be most Important were maximum lift to drag ratio and speed for minimum drag. A landing analysis based …

    nps Repository record for A simulator study of the horizontal landing characteristics and piloting techniques for manned re-entry gliders (opens in a new tab)

  19. Embrittlement and Localized Corrosion in Alloy HT-9

    … neutral and acidic solutions at 30, 60 and 90°C. Constant-load and slow-strain-rate (SSR) testing techniques were used to evaluate the SCC and HE behavior of this alloy by using smooth and notched tensile specimens. Hydrogen effect on the cracking behavior was evaluated by applying cathodic …

    unlv Repository record for Embrittlement and Localized Corrosion in Alloy HT-9 (opens in a new tab) Download PDF for Embrittlement and Localized Corrosion in Alloy HT-9 (opens in a new tab)

Page 1 of 14