Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 15 of 15 for “"construction loads"”.
-
Analysis of construction loads on concrete formwork
… analytical procedures for determining the loads on the shoring system and supporting slabs during the construction of multistory concrete buildings and for determining the lateral pressures imposed by fresh concrete against the wall forms. The procedures assume two-dimensional frame models, …
-
Long-term deflections analysis of reinforced concrete flat plates under construction loads.
Relatively large construction loads applied to immature slabs with their low elastic moduli will cause large initial elastic deflections. The high applied stress/developed strength ratio will cause significant creep, resulting in large long-term deflections. Shrinkage, while not related to …
-
Finite Element Analysis of Unbraced Structural Wood I-Joists Under Construction Loads
… of unbraced wood composite I-joists to worker loads. All experimentation and modeling was conducted on simply supported I-joists varying from 11-7/8 inches to 14 inches in depth and 20 feet to 24 feet in length. I-joists were subjected to static and dynamic loads. The deflections of the top and …
-
Proposed code provisions for slab span thickness limitations including early-age construction loads and time-dependent effects.
A typical construction procedure for a multi-storey reinforced concrete building involves supporting newly cast slabs on a number of previously cast floors through a reshore system. The loads transferred by the forms to the previously cast partially cured supporting slabs may appreciably exceed the …
-
Mechanical properties of concrete at early ages.
Modern construction techniques enable reinforced concrete structures to be constructed in a very short time. The loads occurring due to the construction process on the partially completed structure can be larger than the design service load. The available strength of the immature partially …
-
Preliminary investigation into the shoring systems.
In multistory reinforced concrete building construction, the freshly placed floor is supported by shores which are supported themselves on several previously cast floors. The construction loads in these supporting floors may appreciably exceed the design service loads. Such loads depend on the …
-
Behavior of curved steel trapezoidal box girders during construction
… loading, and quasi-closed box girders during construction, have to be evaluated during the design of these bridges. Considering both cases, the design for construction loading is the least understood and is the most important. Stresses due to construction loading can reach up to 60-70 percent …
-
Analysis and behavior investigations of box girder bridges
… support both the fresh concrete and the entire construction loads hence steel box girders are at their critical stage during construction. In the current study, non composite straight and curved steel boxes are analyzed with beam and shell elements using the three dimensional finite element …
-
Means and Methods Analysis of a Cast-In-Place Balanced Cantilever Segmental Bridge: The Wilson Creek Bridge Case Study
Different means and methods exist in the construction industry to erect bridge superstructures. In planning and execution of the complex construction operations the effects of the chosen erection method need to be considered to achieve a safe and economical process. Failures of bridges under …
-
In-plane shear strength and stiffness of precast concrete panels
… it provides no in-plane shear resistance under construction loads, when the superstructure is the most vulnerable to lateral forces. If the PCP is connected to the girders during deck casting they can provide bracing to the top flanges of the beams and forces in the traditional lateral resisting …
-
Resistance mechanism of simple-made-continuous connections in steel girder bridges
… steel girders over the last two decades. A new construction technique for steel girder bridges was developed to enhance their competitiveness in the short to medium span length range. In the new method, girders are placed on the supports as simple spans under construction loads. The continuity …
-
Development of probability models for concrete formwork live loads
Failure of concrete structures during construction constitutes a significant percentage of construction failures. Formwork failure is among the major causes of concrete construction failures. One of the causes of slab formwork failures is overloading. The major slab formwork loads include dead, …
-
Field Testing of Bridge Girder Webs Subjected to Horizontal Loads
In construction of plate girder bridges, when no ground supported falsework is used, metal brackets bolted to the web of the exterior girders are used to support construction loads. The loads include the weight of the falsework, the weight of the freshly poured concrete of the overhanging portion …
-
Numerical and experimental analysis of the mechanical behaviour of linings in quasi-rectangular shield tunnels
… tunnelling method is widely adopted for tunnel construction in cities. These shield tunnels are typically designed in circular shape due to the good mechanical behaviour of the round section. However, with the increasingly high-density utilisation of urban space, more and more city …