Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 94 for “"continuous cooling"”.
-
Kinetics Of Thermal Decomposition And Polymerization During Continuous Cooling
… and polymerizations can be made to proceed on cooling. Studying the resulting cooling kinetics is the major objective of this work. The kinetics of the reactions are explored by using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) in combination with …
-
Magnetic study of the austenite transformation during continuous cooling, A
Includes bibliographical references.
-
Austenite decomposition of low carbon high strength steels during continuous cooling
… and quantified with dilatometry during continuous cooling using a Gleeble 3500 thermomechanical simulator. The effects of different variables, such as austenite grain size and cooling rate, were quantified. It has been shown that increasing the cooling rate and the austenite grain size …
-
Continuous cooling transformation from coarse-grained austenite in X80 line pipe steels
… experiences rapid heating and subsequent rapid cooling, creating a heat-affected zone (HAZ). The microstructure and, thus, the mechanical properties of the HAZ may be different from that of the as-rolled steel and may have a detrimental effect on pipeline integrity. The area of the HAZ closest …
-
Continuous cooling transformation kinetics and microstructure of mild and low-alloy steel weld metals
<p>Twelve continuous cooling transformation (CCT) diagrams, applicable to reheated (coarse grained region) mild and low-alloy steel weld metals were produced using techniques of high speed dilatometry, thermal analysis, and quantitative metallography. A detailed study of these CCT diagrams revealed …
-
Continuous-cooling-transformation behavior, microstructure, and properties of 0.02C-3.5Ni-3.6Mo high-strength steels
Includes bibliographical references.
-
Effect of Austenite Deformation and Continuous Cooling on the Microstructural Evolution in a Microalloyed Steel
… plane strain compression tests followed by continuous cooling. Increasing the strain magnitude below the recrystallisation-stop temperature (T5%) from 0 to 0.5 with a cooling rate of 20˚C/s, a transition from bainitic ferrite (BF) to acicular ferrite (AF) occurs and grain refinement, …
-
Austenite decomposition of a HSLA-Nb/Ti steel and an A1-TRIP steel during continuous cooling
… equipped with a dilatometer. The effect of cooling rate on the austenite decomposition kinetics were quantified for both steels with initial microstructures comprised of austenite. For the Al-TRIP an additional initial microstructure consisting of a mixture of austenite (67%) and ferrite …
-
Mathematical modelling of the onset of transformation from austenite to pearlite under non-continuous cooling conditions
… processes, prediction of this temperature on cooling, until now, relied upon empirical equations which are based on the cooling rate or degree of undercooling. To develop a method that is capable of predicting the onset of transformation in the steel, applicable to industrial processing …
-
Microstructure and continuous cooling transformation behaviour of C-Mn-Ni and C-Mn-Ni-Mo weld metals
… of the weld metals was controlled by the cooling rate, type and content of the alloying element, prior austenite grain size and the oxygen content. It was shown that progressive addition of nickel depresses the transformation temperature which has the effect of increasing the proportion of …
-
Modeling of austenite decomposition in an AISI 4140 steel
… the austenite decomposition kinetics under continuous cooling conditions in a AISI 4140 steel by applying Kirkaldy's model and Li's model and to test the results of these models by perforating GLEEBLE controlled continuous cooling experiments on this steel. The validity of the Kirkaldy model …
-
Application and Analysis of Asymmetrical Hot and Cold Stimuli
… however a person will perceive a sensation of continuous cooling. This method was tested through a series of experiments, and the results showed that it is capable of generating a continuous cooling sensation without changing the average temperature of the stimulation area. Multiple variations …
-
Investigation of bainitic phase transformation and phase evolution during tempering of high strength medium carbon steels
… phase transformation was investigated under both continuous cooling and austempering conditions. For the manufacturing of small steel blocks, continuous cooling followed by double tempering was replaced with the conventional austempering process followed by a single tempering cycle. Experimental …
-
Mechanisms of Ordered Gamma Prime Precipitation in Nickel Base Superalloys
… from multiple nucleation bursts during the continuous cooling process. The morphology and distribution of these γ′ precipitates inside γ matrix influences the mechanical properties of these materials. Therefore, the study of thermodynamic and kinetic factors influencing the evolution of …
-
Effect of microalloying on the strength of high carbon wire steels
… during several stages of wire processing, continuous cooling experiments with and without deformation as well as patenting simulations were conducted using a Gleeble® 3500 thermomechanical simulator. Continuous cooling was performed from industrial austenitizing (1093 °C) and laying head …
-
Austenite decomposition in an X80 linepipe steel
… determined by austenite decomposition during cooling after welding processes. Thus, a full understanding of continuous cooling transformation of austenite is a key step toward improving the overall performance of linepipes. The main objective of the current study is to investigate the …
-
Austenite decomposition during hot strip rolling of microalloyed low carbon steel
… are cooled by water on the runout table; during cooling, the austenite decomposition takes place that determines the final microstructure and thus the final properties of the hot rolled products. To achieve the desired hot band microstructures and required mechanical properties during hot strip …
-
Characterization and microstructural evolution model of a Nb ferrite-bainite steel
… are performed, and the results used to design continuous cooling transformation tests to study the effects of prior austenite grain size, cooling rate, retained strain, and niobium dissolution on transformation behaviour in the steel. Existing modelling techniques are then applied to the …
-
Phase transformations in cast duplex stainless steels
… time-temperature-transformation (TTT) and continuous-cooling-transformation (CCT) diagrams of two types of cast duplex stainless steels, CD3MN (Fe-22Cr-5Ni-Mo-N) and CD3MWCuN (Fe-25Cr-7Ni-Mo-W-Cu-N), in order to understand the time and temperature ranges for intermetallic phase formation. …
-
Heat transfer and stress generation during forced convective quenching of steel bars
… the evolution of the microstructure under continuous cooling conditions. The kinetics of diffusional and martensitic phase transformations were characterized using the JMAK and Koistinen-Marburger equations, respectively. The kinetic parameters were determined through continuous cooling and …
Page 1 of 5