Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 56 for “"continuous injection"”.

  1. Active Stability Monitoring and Stability Control of DC Microgrids Using Incremental Continuous Injection

    … on the new criterion which uses incremental continuous injection by an existing converter interfacing energy storage in the system and continuously evaluates system stability margin. Furthermore, this dissertation develops an active stability control for dc microgrids which utilizes the …

    utahstate Repository record for Active Stability Monitoring and Stability Control of DC Microgrids Using Incremental Continuous Injection (opens in a new tab)

  2. Characterizing Variability in the Transient Storage Zones of Miller Run in Lewisburg, PA

    … geophysical investigations of the subsurface and continuous-injection tracer studies using a conservative tracer with sampling from the main channel flow and from identified transient storage zones following the continuous injection of tracer. Data analysis leads to a preliminary understanding of …

    bucknell Repository record for Characterizing Variability in the Transient Storage Zones of Miller Run in Lewisburg, PA (opens in a new tab)

  3. Laminar and turbulent dispersion of miscible fluids in porous media

    … describing the tracer concentration for the continuous injection of a tracer fluid from a point source in a column of porous medium. The experimental breakthrough curve was used with this equation to find the longitudinal dispersion coefficient as a function of average pore velocity.

    colostate Repository record for Laminar and turbulent dispersion of miscible fluids in porous media (opens in a new tab)

  4. CO2 EOR Simulation in Unconventional Liquid Reservoirs: An Eagle Ford Case Study

    … on oil rates in numerical simulation. Different injection schemes were considered as performed in CO2 EOR in conventional floods. WAG (water alternating gas) and continuous injection were both tested to provide the basic output performance in order to calibrate economic models. Among different …

    tamu Repository record for CO2 EOR Simulation in Unconventional Liquid Reservoirs: An Eagle Ford Case Study (opens in a new tab)

  5. Estudo de modelos composicionais de óleo na injeção contínua de vapor

    … of the oil, especially the thermal. The steam injection can occur on a cyclical or continuous manner. The continuous steam injection occurs through injection wells, which in its vicinity form a zone of steam that expands itself, having as a consequence the displace of the oil with viscosity and …

    brazil-ufrn Repository record for Estudo de modelos composicionais de óleo na injeção contínua de vapor (opens in a new tab)

  6. Microspheres in Motion: investigating the parameters that influence radioembolization

    … show that catheter position, angle, movement, injection technique, and hepatic arterial blood flow rate affect how microspheres mix with the bloodstream. Injection technique is particularly clinically relevant and adjustable: a high, continuous injection rate leads to a uniform distribution, …

    radboud Repository record for Microspheres in Motion: investigating the parameters that influence radioembolization (opens in a new tab) Download PDF for Microspheres in Motion: investigating the parameters that influence radioembolization (opens in a new tab)

  7. Performance evaluation of CO2 EOR in tight oil formation with complex fracture geometries

    … the carbon dioxide (CO2)-based EOR. Although the injection of CO2 is not new for conventional oil reservoirs, its practice in tight oil formations is still a relatively novel idea. Two injection-production strategies are often employed: continuous CO2 injection or flooding and CO2 Huff-n-Puff. …

    texas Repository record for Performance evaluation of CO2 EOR in tight oil formation with complex fracture geometries (opens in a new tab)

  8. Análise da trajetória de poços horizontais em reservatório de óleo pesado

    … testing new tools and methods. The continuous injection of steam, through a steam injector well and a horizontal producer well in order to improve horizontal sweep of the fluid reservoir, it is an efficient method. Starting from an heterogeneous model, geologically characterized, …

    brazil-ufrn Repository record for Análise da trajetória de poços horizontais em reservatório de óleo pesado (opens in a new tab)

  9. Gerenciamento da abertura do Choke de injeção de gás no método Gas-Lift contínuo usando controladores Fuzzy

    … lift methods are used. Lifting systems Continuous Gas-Lift are used in onshore wells and subsea environments, due to its robustness, simplicity and ability to operate the wide rates range. This method consists of continuous injection of gas at a certain point in the production tubing, …

    brazil-ufrn Repository record for Gerenciamento da abertura do Choke de injeção de gás no método Gas-Lift contínuo usando controladores Fuzzy (opens in a new tab)

  10. Influence of light and algae on nutrient transformations at the sediment-water interface of an agricultural stream

    … located in Fremont, Nebraska. Simultaneous continuous injection experiments into replicate open- and closed-bottom chambers were used to control the hydrologic residence time. A bromide tracer was injected, and samples were taken for nutrient analysis in the surface and subsurface water at …

    vt Repository record for Influence of light and algae on nutrient transformations at the sediment-water interface of an agricultural stream (opens in a new tab)

  11. Evaluation of an Oxygen Injection Technology for In-Situ Hydrocarbon Bioremediation in a Fractured Bedrock Environment

    … in this type of groundwater environment, an injection test was completed using iTi’s gPro® oxygen injection technology. About 1000 L of water containing dissolved oxygen at ~ 30 mg/L and a bromide tracer was injected over ~ 90 minutes and monitored for ~ 10 days in the injection well and in a …

    waterloo Repository record for Evaluation of an Oxygen Injection Technology for In-Situ Hydrocarbon Bioremediation in a Fractured Bedrock Environment (opens in a new tab)

  12. ERTh: Electrical resistivity monitoring of heat tracer to characterize aquifer heterogeneities

    Knowledge of spatially continuous hydraulic conductivity (K) distributions is crucial to the accurate modeling of hydrogeological processes. The representative scales of K estimates from traditional slug and pumping tests are, however, inadequate to accurately predict groundwater flow and …

    buffalo Repository record for ERTh: Electrical resistivity monitoring of heat tracer to characterize aquifer heterogeneities (opens in a new tab)

  13. Implementation of Chemical Flooding Module into the General Purpose Adaptive Simulator

    … and efficiency of the different methods. Both continuous injection and tracer slug concentration profiles and history numerical results were compared with analytical solutions and with the UTCHEM simulator numerical output and were generally in good agreement. Numerical results from GP AS for …

    texas Repository record for Implementation of Chemical Flooding Module into the General Purpose Adaptive Simulator (opens in a new tab) Restricted access

  14. Modeling carbon sequestration in transition zone to optimize storage potential

    … because of their wide distribution and low injection cost. Injected CO₂ in a shallow region segregates into two zones according to CO₂ phases within the initial reservoir pressure and the maximum bottom hole pressure: gas zone and transition zone. Transition zone is a better option because …

    must-thes Repository record for Modeling carbon sequestration in transition zone to optimize storage potential (opens in a new tab)

  15. Degradation of Emerging Contaminants by Advanced Oxidation Using Multi-Walled Carbon Nanotubes and Continuous Ozone Injection

    With a growing population and continuous accumulation of pollutants, water resources worldwide are quickly being depleted. Drastic improvements need to be made in both water conservation and treatment. Advanced oxidation processes (AOPs) have been developed to go above and beyond the capabilities …

    calpoly Repository record for Degradation of Emerging Contaminants by Advanced Oxidation Using Multi-Walled Carbon Nanotubes and Continuous Ozone Injection (opens in a new tab)

  16. Thermodynamics of porous media: non-linear flow processes

    … EOS has been chosen for the simulation of the continuous injection of carbon dioxide into a depleted natural gas reservoir. In this simulation, real fluid behaviour has been considered. Interpreting the simulation results allows prognoses of CO2 propagation velocities and its distribution …

    qucosa-diss

  17. Speciation of inorganic aluminum solutions and modeling their kinetics and mechanisms of adsorption on selected solids

    … of time. Observed breakthrough curves (BTC) for continuous injection of the various Al solutions through kaolinite suggested the existence of at least two mechanisms for Al adsorption. It was shown that a relatively rapid reaction, where solution Al was in equilibrium with the solid phase, …

    vt Repository record for Speciation of inorganic aluminum solutions and modeling their kinetics and mechanisms of adsorption on selected solids (opens in a new tab)

  18. Scale-up of dispersion for simulation of miscible displacements

    … analytical solution for two-dimensional CDE for continuous injection source is used to determine longitudinal and transverse dispersivity for the flow medium. The validated model is used to investigate the effect of heterogeneity and other first contact miscible (FCM) scaling groups on …

    texas Repository record for Scale-up of dispersion for simulation of miscible displacements (opens in a new tab)

  19. Development of Iron Nanoparticles for Magnetic Particle Imaging Applications

    … forming during growth.</p> <p>Series 2 tested a continuous injection of iron pentacarbonyl using an extended LaMer growth mechanism of nanoparticles. Different injection speeds and different surfactants were tested to determine potential changes in size and shape of the nanoparticles through this …

    utk-theses Repository record for Development of Iron Nanoparticles for Magnetic Particle Imaging Applications (opens in a new tab)

  20. Single Well Completion and Management Strategies for Enhanced Recovery of Tight Oil Using Miscible Gas Injection

    … well to well displacement using water and gas as injection fluid failed in tight oil largely due to short-circuits along fractures connecting adjacent injection and production wells. As an alternative, operators have tried alternating miscible gas injection with production in a single well …

    houston Repository record for Single Well Completion and Management Strategies for Enhanced Recovery of Tight Oil Using Miscible Gas Injection (opens in a new tab)

Page 1 of 3