Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 115 for “"control mode"”.
-
Robot Force Velocity Control Using Expert System for Control Mode Changes
… however, increase the complexity and cost of the control software. Efficient methods of reacting to sensor information during automated system operation are required to reduce software complexity and expense. This thesis analyzes a robotic construction task and describes a new rule based system …
-
Investigation and Model Development for Operational Modes of a Unified Power Flow Controller
… research is on deriving small signal stability models for different Flexible AC Transmission Systems devices by introducing a simple systematic method that is applicable to any dynamic device. Two different small signal models for Unified Power Flow Controllers are introduced. One model is …
-
Virtual Synchronous Machine based Fuzzy V-F Control for VSC of Battery Storage System for Seamless Performance of Microgrid
… between the grid-connected and islanded mode of microgrid. The prominence of the seamless transition is to maintain the load voltage and frequency as well as constant power delivery during both the modes of operation of microgrid. In this thesis, voltage source converter (VSC) of PV …
-
Force override rate controller for remote actuation
… robotic manipulator systems are operated in rate control mode to achieve a commanded position and orientation of the end-effector. Performance of certain tasks, such as applying a torque to a screw, would be more efficient if performed in unilateral force control mode. A six axis force-torque …
-
Evaluation of Grundfos CRE 15-3 Variable Speed Centrifugal Pump and Worthington Constant Speed Centrifugal Pump Applications in KU Steam Power Plant
… were operated in constant discharge pressure mode, and they were able to supply condensate water to both the deaerator tank and the vent condenser. The Worthington pump operated normally and was able to supply water to both components. However, in Case 1, it was found that the Grundfos pumps …
-
Residual Capacity of Blast-Damaged Reinforced Concrete Columns
… under live explosion loading and numerical modelling of the columns. The primary objective of this current phase of the project reported in this thesis is the investigation of the residual capacity of the blast-damaged reinforced concrete columns.Thirteen (13) columns were tested in this …
-
Design and evaluation of augmented reality interfaces for robot end-effector orientation control
… for robot end-effector (EE) orientation control in AR. In this thesis, two motion mapping techniques, hand translation and wrist rotation, were explored. Three DOF separation techniques (Euler angle separation, axis-angle separation and 3 DOF simultaneously) were combined with the two …
-
Angular analysis of B0 -> K*0e+e- decays at LHCb
… and experimental overview 3 1 The Standard Model 4 1.1 Particles and symmetries................................................................................................ 4 1.2 Electromagnetic …
-
Comparative Analysis of Heat Exchangers and Continued Investigation of Variable Speed Versus Constant Speed Pump Systems in KU's Steam Power Plant
… The Grundfos pumps can operate in either of two modes: pressure control or level control; and the average power consumption of the Grundfos pumps is considerably different, depending on operation mode. The pressure control mode of the Grundfos pumps is similar to that of the Worthington pump’s …
-
The optimal application of common control techniques to permanent magnet synchronous motors
… electric vehicles. This thesis develops a new control strategy for Permanent Magnet Synchronous Motors (PMSMs) to reduce the motor and inverter losses compared to conventional control techniques. The strategy utilises three common control modes for PMSMs; brushless DC with 120°E conduction, …
-
Changes in institutional environments: a comparative study of foreign entry strategies in Hungary, Russia, and China in the 1990s
… on the opposite moves of two foreign entry mode strategies (cross-border acquisition and international joint venture) in three transition economies: Hungary, Russia, and China. I argue that the three institutional elements (government withdrawal, privatization progress, and enterprise …
-
Multifunctional control for robust grid-forming converters
This thesis deals with control methods for grid-forming converters that are multifunctional. Multifunctional converters can switch between different control modes according to operational requirements, making them a flexible asset for the future grid. The thesis introduces a multifunctional control …
-
Evaluating local and overall thermal comfort in buildings using thermal manikins
… local temperatures. Then, a multi-segmental model of human thermoregulation was developed based on these findings to predict the local skin temperatures of individuals' body segments with a good accuracy. The model predictability of skin temperature was verified for steady state and dynamic …
-
ΒΕΛΤΙΩΣΗ ΤΗΣ ΜΕΤΑΒΑΤΙΚΗΣ ΑΠΟΚΡΙΣΗΣ ΔΙΑΣΥΝΔΕΔΕΜΕΝΩΝ ΣΥΣΤΗΜΑΤΩΝ ΠΟΥ ΠΕΡΙΛΑΜΒΑΝΟΥΝΚΑΙ ΔΙΑΣΥΝΔΕΣΕΙΣ ΜΕ ΣΥΝΕΧΕΣ ΡΕΥΜΑ
… CIRCUIT RATIO. IN SUCH CASES THE NORMAL MASTER CONTROL MODE OF OPERATION OF THE HVDC LINK IS THE FREQUENCY CONTROL MODE. IN THIS THESIS THE DESIGN OF A SUPERIMPOSED HVDC CONTROL SYSTEMIS PROPOSED, THAT COORDINATES SIMULTANEOUSLY THE MODULATION OF ACTIVE AND REACTIVE POWER OF THE CONVERTERS AND …
-
Study and Evaluation of Traffic Responsive Control on a Large Arterial Network
Traffic responsive mode of operation with its two mechanisms, threshold-based and pattern matching, is considered one of the effective and efficient signal control modes. This operation mode is underutilized due to its cumbersome configuration procedure. The research presented in this thesis aims …
-
Developing a multi-degree-of-freedom body-machine interface for control of assistive devices
… for 2D tasks. We extended the PCA position control mode to velocity control mode to enable children to control the positions of the end-effector of a robotic arm. Testing showed that this method was not well-suited for younger children, nor was it easily expandable to higher degrees of …
-
RF-MEMS switches for reconfigurable antennas
… packaging (contamination layers) and actuation control (high impact force, wear, fatique). This Thesis focuses on the design and control of a novel ohmic RF-MEMS switch specified for reconfigurable antennas applications. This new switch design focuses on the failure mechanisms restriction, the …
-
Global Congestion and Fault Aware Wireless Interconnection Framework for Multicore Systems
… protocol for the wireless interface works in two modes. The first is data mode where a token-based protocol is utilized to transfer core data. And the second mode is the control mode where a broadcast-based communication protocol is used to share the network congestion information. The work …
-
Design and Implementation of a Hard Real-Time Telerobotic Control System Using Sensor-Based Assist Functions
… a novel concept of a hard real-time telerobotic control system using sensory-based assistive functions combining autonomous control mode, force and motion-based virtual fixtures, and scaled teleoperation. The system has been implemented as a PC-based multithreaded, real-time controller with a …
Page 1 of 6