Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 133 for “"coolants"”.
-
Material Corrosion by Nuclear Reactor Coolants
… material corrosion by nuclear reactor coolants, including pressurized water reactor (PWR) coolant, boiling water reactor (BWR) coolant, high-temperature steam, lead-bismuth eutectic (LBE), and molten salt. Novel cladding materials for accident tolerant fuel (ATF) and additive …
-
Power level determination from induced gamma activity in nuclear reactor coolants.
The operation of a nuclear power plant Involves a variety of instrumentation, most of which is of a conventional character. However, for control purposes, conventional instrumentation for power level determination is not adequate since it does not respond instantaneously either to overall or to …
-
Evaluation of Multiple Approaches for Solidification Modeling of Advanced Nuclear Reactor Coolants
… phenomena in advanced nuclear reactor coolants. The primary objective is to offer cost-effective alternatives to experimental studies and enable rapid simulation of multiphysics reactor transients. To achieve this, a hierarchical structured framework is established. High-fidelity models …
-
Modelling and characterisation of cryogenic coolants in additively manufactured microfluidic cooling channels
In the present Thesis, computational investigations of microfluidic channel flows for various high-relevance engineering applications are performed. Initially, a numerical framework is implemented to overcome the limitations of the pseudo-compressibility method in strongly viscous, microfluidic …
-
Neutron Imaging of Lithium (Li) Coolants inside High Temperature Niobium (Nb) Heat Pipes
<p>Lithium (Li) behavior inside a high temperature Nb-Li leading edge heat pipe was successfully imaged under induction heating operation via neutron imaging. Startup and cool-down operations gave visual confirmation of bulk Li movement using both gravity assisted and inverted operating …
-
Spatial Power Profiling Method Using Visual Information in Reactors with Optically Transparent Coolants
… for nuclear reactors with optically transparent coolants. The detection of visible light produced by Cerenkov radiation at points outside of the active core region of a TRIGA reactor is correlated to the spatial power profile within the reactor. This is done by first using simple models in MCNP …
-
PERFORMANCE OF A MICROCHANNEL-THERMOELECTRIC POWER GENERATOR WITH ALUMINA-IN-WATER NANOFLUIDS AS COOLANTS
… which uses alumina-in-water nanofluids as coolants, that is intended to replace or supplement current non-renewable power supplies such as battery packs in order to contribute to overcoming the abovementioned challenges. The MC-TEPG recovers waste heat internally generated by motors of …
-
Characterisation of the Properties and Performance of Nanofluid Coolants with Analysis of Their Feasibility for Datacentre Cooling
It is a generally accepted belief that the use of nanofluids enhances heat transfer rates in comparison with a traditional fluid and can be considered to be one of the most important energy conservation measures in many industrial applications. Despite increased interest, detailed and systematic …
-
Computational and Experimental Investigation of Conventional and Cryogenic Cooling in Milling Operations
… tool life and efficiency are often managed using coolants. Appropriate coolant selection and well targeted application can transport significant thermal loads away from the cutting region, along with providing lubrication and aiding in chip evacuation. In this work, numerical and experimental …
-
Experimental Investigation of Forced Convection Heat Transfer of Nanofluids in a Microchannel using Temperature Nanosensors
… as mass concentrations of nanoparticles in the coolants. Anomalous thermal behavior was observed in the forced convective heat transfer experiments. Precipitation of the nanoparticles on the heat exchanging surface was monitored using Scanning Electron Microscopy (SEM) and Energy Dispersive …
-
Thermodynamic Analysis of a Novel Cycle for Nuclear SMR and Heat Transfer Performance Validation of the Related Supercritical Working Fluids
… demonstrated the ability to use non-water-based coolants in nuclear reactor designs, which consequently have their own trade-offs. Some positive consequences of using different reactor designs include enhanced safety, better economics, and cheaper clean consumer energy. The work described in this …
-
Analysis of coolant options for advanced metal cooled nuclear reactors
… other physical and chemical properties of such coolants. The objectives of the thesis are two fold. The first objective is to independently calculate the generation of Polonium-210 in reactors cooled by lead and leadbismuth eutectic. The motivation for this is to address a noted lack of …
-
Enhancement of the cooling performance of microchannel heat sinks
… are improved by utilization of these advanced coolants (individually or a combination of the advanced coolants in a two layer contourflow micro-channel heat sink) are modeled and examined and based on the obtained results, a significant potential to improve the cooling performance of the …
-
Vapour Films on Liquid Metals
… heat transfer from solid and liquid metals to coolants and to examine the physical characteristics and stability of vapour films. The bulk of the experiments involved the quenching of solid copper in water and organic (methanol, ethanol, n-propanol, acetone, chloroform and carbon tetrachloride) …
-
Experiments on Film Cooling of Gas Turbine Vane Passage Surfaces: The Effects of Various Distributions of Combustor Coolant and Endwall Injection Coolant
… of the combustor. To increase this limit, coolants injected at different locations form low-temperature films on the surfaces of these regions to avoid melting and thermal stress damage. This injection significantly changes the flow field in the vane passage. Therefore, there is a need to …
-
Development of thermodynamic cycles for sodium-cooled-fast reactors.
… all GEN-IV reactor concepts and investigate the coolants and their characteristics in these concepts. For this objective, main thermophysical, corrosion, and neutronic properties of coolants of the GEN-IV reactors within the proposed temperature range of operation were investigated. Heat Transfer …
-
Comparing Various Performance Aspects of Synthetic Metalworking Fluids in a Manufacturing Setting to Determine the Best Choice for a Grinding Operation
… of factors to confidently choose the top two coolants. The two coolants from Phase 1 were tested over a four week period in Phase 2. Phase 2 was more of a study of the longevity and durability of each fluid. The safety of the machinists and the quality of the workpiece remained at the …
Page 1 of 7