Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 13539 for “"cooling"”.

  1. Hotspot Cooling Performance for Confined Jet Impingement Cooling

    … challenge even more difficult. Jet impingement cooling is one of the top candidates for removing such extreme heat fluxes in microelectronics. Jet impingement cooling can achieve heat transfer coefficients (HTCs) due to its normal incident flow-field and ability to thin the local thermal …

    ucf Repository record for Hotspot Cooling Performance for Confined Jet Impingement Cooling (opens in a new tab)

  2. Milk cooling

    … is intended as a study in the problem of milk cooling. In preparing this thesis, references have been made to the latest investigations along the lines of milk cooling and in each case credit has been given to the writers and investigators whose material has been used.</p>

    ut-knoxville Repository record for Milk cooling (opens in a new tab)

  3. A Thermally Driven Two-Phase Cooling Device for CPU Cooling

    … the present study developed a novel cooling solution with essential attributes of compactness, low-cost, high cooling capacity, low power consumption, and orientation-free design. To achieve these, the mechanism of phase change was utilized. Fundamental boiling experiments were …

    nus Repository record for A Thermally Driven Two-Phase Cooling Device for CPU Cooling (opens in a new tab) Download file for A Thermally Driven Two-Phase Cooling Device for CPU Cooling (opens in a new tab)

  4. Modelling of run-out table cooling with power cooling unit

    The full abstract for this thesis is available in the body of the thesis, and will be available when the embargo expires.

    ubc Repository record for Modelling of run-out table cooling with power cooling unit (opens in a new tab) Download PDF for Modelling of run-out table cooling with power cooling unit (opens in a new tab)

  5. Parametric Study of Turbine Blade Internal Cooling and Film Cooling

    … it is necessary to provide an aggressive cooling system. Relatively cool air, ducted from the compressor of the engine is used to remove heat from the hot turbine blade. This air flows through passages in the hollow blade (internal cooling), and is also ejected onto the surface of the …

    tamu Repository record for Parametric Study of Turbine Blade Internal Cooling and Film Cooling (opens in a new tab)

  6. Investigation of film cooling effectiveness and enhancement of cooling performance

    … (TBCs) and by the development of effective cooling methods that lower the temperature of all surfaces that come in contact with the hot gases. Since the lower-temperature air used for cooling is extracted from the compressor, efficiency considerations demand effective cooling with minimum …

    iastate Repository record for Investigation of film cooling effectiveness and enhancement of cooling performance (opens in a new tab)

  7. Cooling Bodies Stories

    Cooling Bodies is a collection of six short stories that explore contemporary technology, Internet culture, and social media through various subjective positions ranging in age, gender identity, sexual orientation, and social background. Cooling Bodies employs classic short story theorists, …

    regina Repository record for Cooling Bodies Stories (opens in a new tab) Download PDF for Cooling Bodies Stories (opens in a new tab)

  8. Casing effusion cooling

    <p>The design, modelling and testing of a film cooling system intended for the casing of an unshrouded HP turbine rotor is described in this thesis. Due to the dense network of small film cooling holes employed in such a system, this is often referred to as a <em>casing effusion cooling</em> …

    oxford Repository record for Casing effusion cooling (opens in a new tab)

  9. Neutron Star Cooling

    <p> To determine the detectability of thermal radiation from the surface of a neutron star, the surface temperature as a function of time is needed. To find this, the surface temperature as a function of core temperature is found; this ratio depending on temperature, stellar mass, and magnetic …

    mcmaster Repository record for Neutron Star Cooling (opens in a new tab)

  10. Neutron Star Cooling

    <p>To determine the detectability of thermal radiation from the surface of a neutron star, the surface temperature as a function of time is needed. To find this, the surface temperature as a function of core temperature is found; this ratio depending on temperature, stellar mass, and magnetic field …

    mcmaster Repository record for Neutron Star Cooling (opens in a new tab)

  11. Cyclotron Maser Cooling

    osaka Download PDF for Cyclotron Maser Cooling (opens in a new tab)

  12. Optimization and characterization of integrated cooling circuit for gas turbine cooling

    … to optimize the integrated design of internal cooling and film cooling configuration for a gas turbine airfoil. Various film cooling hole geometries were tested with appropriate co-flow and counter-flow channel feed configurations in the wind tunnel facility. The results showed that X-AOpt …

    texas Repository record for Optimization and characterization of integrated cooling circuit for gas turbine cooling (opens in a new tab)

  13. Laser cooling and sympathetic cooling in a linear quadrupole rf trap

    An investigation of the sympathetic cooling method for the studies of large ultra-cold molecular ions in a quadrupole ion trap has been conducted.Molecular dynamics simulations are performed to study the rf heating mechanisms in the ion trap. The dependence of rf heating rates on the ion …

    tamu Repository record for Laser cooling and sympathetic cooling in a linear quadrupole rf trap (opens in a new tab)

  14. Personal-portable Cooling Garment Based on Adsorption Vacuum Membrane Evaporative Cooling

    A cutting edge man-portable AVMEC cooling garment was demonstrated to be able to provide sufficient cooling for personnel working at mediate activity loads. Studies were first carried out in a well controlled vacuum desiccator at room temperature to elucidate the effects of several key parameters …

    ottawa-retro Repository record for Personal-portable Cooling Garment Based on Adsorption Vacuum Membrane Evaporative Cooling (opens in a new tab)

  15. Evaluation of the cooling performance for adjoint optimized film cooling hole geometries

    … (Fraser B. Jones) was used to design shaped film cooling holes fed by internal co-flow and cross-flow channels. The CFD simulations for said hole geometries predicted that the holes optimized for use with cross-flow (X-AOpt) and co-flow (Co-AOpt) would significantly increase adiabatic …

    texas Repository record for Evaluation of the cooling performance for adjoint optimized film cooling hole geometries (opens in a new tab)

  16. Thermoelectric cooling devices: thermodynamic modelling and their application in adsorption cooling cycles

    … framework for modeling the solid state cooling devices namely thermoelectric cooler, the pulsed thermoelectric cooler, thin film thermoelectric device, and an electro-adsorption chiller (EAC) such that their performances can be analyzed and understood. Using the thermodynamic modeling …

    nus Repository record for Thermoelectric cooling devices: thermodynamic modelling and their application in adsorption cooling cycles (opens in a new tab) Download file for Thermoelectric cooling devices: thermodynamic modelling and their application in adsorption cooling cycles (opens in a new tab)

  17. Spatially-selective optical pumping cooling and two-isotope collision-assisted Zeeman cooling

    In this thesis I describe two non-evaporative cooling schemes for cooling Rb atoms. The first is a Sisyphus-like ultracold gas cooling scheme called Spatially-selecTive Optical Pumping (STOP) cooling. In principle, STOP cooling has wide applicability to both atoms and molecules. STOP cooling works …

    colostate Repository record for Spatially-selective optical pumping cooling and two-isotope collision-assisted Zeeman cooling (opens in a new tab)

  18. Commercial Building Energy Performance - Room cooling principles and hydronic cooling system temperatures

    … property owners. This thesis aims to map typical cooling demands in a commercial building and explore the possibilities, limitations and basic energy demands associated with different room cooling principles. Another aim is to investigate the possibilities of improving hydronic cooling system …

    chalmers Repository record for Commercial Building Energy Performance - Room cooling principles and hydronic cooling system temperatures (opens in a new tab)

  19. Single-photon atomic cooling

    … implementation of single-photon atomic cooling. In this scheme atoms are transferred from a large-volume magnetic trap into a small-volume optical trap via a single spontaneous Raman transition that is driven near each atom's classical turning point. This arrangement removes nearly all …

    texas Repository record for Single-photon atomic cooling (opens in a new tab)

Page 1 of 677