Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 168 for “"cooling load"”.
-
Cooling Load Calculations of Heat Gain for Buildings
… a computer program for calculating the transient cooling load required to maintain the interior of a building at a given temperature. We assume that the building is standing by itself without surrounding radiating buildings or pavements. The heat gain through semi-transparent single or composite …
-
FACADE PERFORMANCE ON THE IMPACT OF COOLING LOAD IN MULTISTORIED COMMERCIAL BUILDINGS
… properties of the material) that influences the cooling load in the buildings. This is done by using computational building performance simulation (TAS simulation software prepared by Environmental Design Solutions Limited) to control the effect of various parameters that affect the cooling load. …
-
Validation of a Simplified Building Cooling Load Model Using a Complex Computer Simulation Model
… has become a useful tool for predicting cooling, heating and electrical loads for facilities. Simulation models have been validated throughout the years by comparing simulation results to actual measured values. The simulations have become more accurate as approaches were changed to be …
-
Analysis of Building Peak Cooling Load Calculation Methods for Commercial Buildings in the United States
… aims to provide valid comparisons of the peak cooling load methods that were published in the ASHRAE Handbook of Fundamentals, including the Heat Balance Method (HBM), the Radiant Time Series Method (RTSM), the Transfer Function Method (TFM), the Total Equivalent Temperature Difference/ Time …
-
A Comprehensive Evaluation of Cooling Load Reduction Potentials of Self-Ventilated Cavity Wall in the U.S
The cooling load reduction potentials of self-ventilated cavity walls (SVCW) were quantitatively investigated through numerical simulations. Parametric and correlation studies were conducted to understand the impacts of typical wall geometric configurations on the performance of reducing cooling …
-
Development and Demonstration of Surrogate Models to Predict Energy-Related Building Features from Heating and Cooling Load Signature
… features from widely available heating and cooling load data. The research explores two methodologies: 1) unsupervised learning with clustering to group energy-related features, and 2) supervised learning using artificial neural networks (ANNs) to predict these features. Both methods utilize …
-
Window Shading for Cooling Load Reduction in Commercial Building Retrofits in Tropical Climates: The Case of Accra, Ghana and Miami, Florida
… 0.7 for an east, west and south-facing window on cooling load reduction and daylighting performance for office building retrofits in Accra, Ghana, and Miami, USA. The results showed that, in both Accra and Miami, the fixed louvered overhang achieved a reduction in window transmitted solar …
-
Expanding the applicability of residential economizers through HVAC control strategies
… range of climates and conditions in which free cooling from an economizer can replace air conditioning power consumption in residential applications. To explore this issue, we first discretize a simple building model in space and in time. We then solve the associated energy and mass balances for …
-
Determination of building cooling loads using real weather data.
… that were encountered using the well-established cooling load method. For instance, cooling load calculations of a building are dependent on the external dynamic environmental factors. The load on the building is also affected by the internal dynamic environmental factors, in addition to the …
-
Comparison of two architectural intervention strategies for climate resilience : floor-to-ceiling height and overhang depth
… Texas. The impact on the total energy use and cooling load are analyzed, with both projected to increase from 2020 to 2100[1]. The comparison uses a building designed to 2015 IECC standards and is modeled in the eQuest 3.65 energy modeling tool. The design intervention strategies compared are …
-
URBAN TEXTURE ANALYSIS AND ITS RELATION TO BUILDING ENERGY CONSUMPTION
… the identified urban texture related to district cooling load and external heat gains through building envelopes. The findings serve to identify the relevant variables which characterize urban density and form; such as floor area ratio, open space ratio, story height, gross site coverage, and sky …
-
Green Facade Energetics
… buildings and instrumented them to measure the cooling effect of a green façade on their south and west walls. The green façade significantly reduced the temperature of the building's ambient air, exterior surface, and interior air, and the heat flux through the vegetated wall. Using a …
-
BALANCING INDOOR AIR QUALITY AND ENERGY CONSUMPTION OF AIR-CONDITIONED SPACES THROUGH CO2 AND OCCUPANCY MODELLING
… ventilation level, CO2 thresholds and induced cooling load for air-conditioned spaces. Both stochastic and deterministic models are tested, and the deterministic method proves to be superior for the used set of inputs. The main work takes place in a university lecture theatre, for which both …
-
Dynamic modeling and capacity control of multiple chiller systems
… chiller systems are widely utilized for space cooling in industrial and commercial buildings. Good chiller control methods could offer benefits to users for more energy savings. Matching the anticipated cooling load and achieving higher coefficient of performance (COP) are the main objectives …
-
ENERGY PERFORMANCE OF LARGE BUILDINGS
… of a day as well as prediction of zone cooling load in commercial buildings. Our simplified method consists of two steps. The first step deals with establishment of the analytical solutions for the hourly zone temperatures and cooling loads, where the main assumption made is that the …
-
DEVELOPMENT AND EVALUATION OF NOVEL AIR HANDLING UNIT CONTROL STRATEGIES FOR IMPROVED BUILDING DEMAND FLEXIBILITY AND THERMAL COMFORT
… regions in the United States. With many flexible loads, buildings have the potential to reduce power demand during peak times and provide demand flexibility. Building enables demand flexibility through measures such as shifting energy use to another time and shedding of load. Applying advanced …
-
Πειραματικός και υπολογιστικός προσδιορισμός πεδίου ταχυτήτων ροής ρευστού (νερού) σε ανοικτό αγωγό, λόγω θερμοκρασιακών μεταβολών
Ιn this Ph.D. thesis the effect of thermal and cooling load on a fluid-water surface is investigated. Experiments were conducted for the study of the temperature field of water, when a part of the surface receives, in one case, a heat load (radiation), while in the other case, a cooling load …
-
Assessment of the Impact of Climate Change on the Performance of Residential Buildings in New Zealand
… climate change scenarios on the heating and cooling requirements of residential buildings across different regions in New Zealand. The study compared the effect of changes in building codes on the energy consumption of residential buildings in future years, based on the New Zealand building …
-
Measure Whole-Building HVAC System Energy Efficiency
… such an index, called the Building Systems Load/Energy Ratio, which is the ratio of the building systems total load to the total energy input provided by all the HVAC systems components. The building systems total load is composed of the envelope load, the load from internal gains, and the …
Page 1 of 9