Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 26 for “"cooling plate"”.

  1. Automatic Optimisation of a Battery Pack Cooling Plate

    … introduces a need for effective battery pack cooling systems. Effective cooling systems play a key role in the battery packs service life. This thesis compares two indirect liquid-cooled cooling configurations and optimises the cooling system in terms of maximum battery cell temperature …

    chalmers Repository record for Automatic Optimisation of a Battery Pack Cooling Plate (opens in a new tab)

  2. battery cooling simulation and DFMEA of two mode hybrid car

    … to develop and provide a better solution for a cooling plate design, which will help controlling the battery temperature to avoid the overheating of the battery. The cooling plate for battery model of 25S2P was designed by considering transient mode of heat transfer. This cooling plate can be …

    ttu Repository record for battery cooling simulation and DFMEA of two mode hybrid car (opens in a new tab)

  3. Modification of an ultra-high-vacuum scanning tunneling microscope for silicon nanostructure fabrication

    … system are described: an update to the cooling plate structure for more effective cooling of the dipstick and sample holder, and the installation of a capillary doser for concentrating the precursor gas to the tip-ample junction during silicon nanostructure growth. The updated cooling …

    uiuc Repository record for Modification of an ultra-high-vacuum scanning tunneling microscope for silicon nanostructure fabrication (opens in a new tab)

  4. Theoretical and Experimental Investigations of Permeate Gap Membrane Distillation

    … Additionally, the module with a more conductive cooling plate had a higher flux and lower Specific Thermal Energy Consumption (STEC), which was mainly attributed to the lower thermal resistance of the cooling plate. Due to the nearly stagnant velocities within the gap and coolant channels, the …

    vu-aus Download PDF for Theoretical and Experimental Investigations of Permeate Gap Membrane Distillation (opens in a new tab)

  5. Role of Crystallinity on Failure Variability in ASTM D1693 Bell Test

    … preparation irregularities related to uneven cooling during compression molding were felt to be a major contributing factor and one that was controllable if the hypothesis proved true. This thesis work attempted to validate the hypothesis about crystallinity’s role in test variability by …

    mcmaster Repository record for Role of Crystallinity on Failure Variability in ASTM D1693 Bell Test (opens in a new tab)

  6. Integration of electrical components in metal additively manufactured products

    … This was initially done by deriving a simpli ed cooling plate which lays the foundation of the further described case study. According to the literature ndings, the most promising AM methods has shown to be ultrasonic additive manufacturing (UAM) and selective laser melting (SLM). Furthermore, …

    chalmers Repository record for Integration of electrical components in metal additively manufactured products (opens in a new tab)

  7. Enhancement of two-phase thermosyphon heat transfer

    … in terms of geometry, orientation and the cooling plate temperature. The thermosyphon consists of a heated wall and a parallel cooled wall with a gap of a certain width in between. Vapor phase is generated through boiling on the heated wall, and is condensed by the cooled wall. …

    ttu Repository record for Enhancement of two-phase thermosyphon heat transfer (opens in a new tab)

  8. Time efficient simulations for advanced battery cooling concepts enabling EV fast charging

    … To address this issue, advanced battery cooling concepts are required to ensure their safety and longer lifespan. This thesis presents a method to simulate the 3D thermal behaviour of a battery module under fast charging with a given cooling strategy. This includes accurate modelling of …

    chalmers Repository record for Time efficient simulations for advanced battery cooling concepts enabling EV fast charging (opens in a new tab)

  9. Multi-Objective Design Optimization of Electric Vehicle Battery Cooling Plates Considering Thermal and Pressure Objective Functions

    … the lifetime. This study investigates battery cooling using cooling plates: thin rectangular fabrications inserted between battery cells. A coolant pumped through internal channels absorbs heat and transports it away from the battery. Previous studies of liquid heat exchangers have indicated …

    queens Repository record for Multi-Objective Design Optimization of Electric Vehicle Battery Cooling Plates Considering Thermal and Pressure Objective Functions (opens in a new tab)

  10. Combined Evaporation and Freeze-Thaw Effects in Polymer Amended Mature Fine Tailings

    … Freezing is accomplished using an electric cooling plate specially mounted in an insulated column. Polymer-amended tailings are placed at a lift of half-meter, which has been allowed to consolidate. Temperature is recorded using thermocouples, while the densification and dewatering is …

    carleton Repository record for Combined Evaporation and Freeze-Thaw Effects in Polymer Amended Mature Fine Tailings (opens in a new tab)

  11. CFD study of Thermal Runaway in a Battery Module

    … mitigation strategies were implemented, one with cooling and one with improved insulation between the battery cells. It was found that the methods used is this thesis can be implemented to simulate thermal runaway and to predict its propagation. A large portion of the heat released from each …

    chalmers Repository record for CFD study of Thermal Runaway in a Battery Module (opens in a new tab)

  12. Numerical-Based Thermal Analysis of Proton Exchange Membrane Fuel Cells

    … the temperature distribution within rectangular cooling plates with active area of 4437mm2. The performance of channels with varying width of channels, rib and header is evaluated in terms of temperature uniformity index, temperature difference and pressure drop for 15 different cases. The …

    waterloo Repository record for Numerical-Based Thermal Analysis of Proton Exchange Membrane Fuel Cells (opens in a new tab)

  13. Battery Cooling Function in Structural Brackets

    … battery packs at Volvo Cars, there are separate cooling plates for thermal management of the battery modules and cells. To hold the cooling plates and the modules in place, separate support bracket with load carrying and crash withstanding capability is used. The two component design of cooling …

    chalmers Repository record for Battery Cooling Function in Structural Brackets (opens in a new tab)

  14. Numerical Design Optimization for Thermal and Pressure Behaviour of Multiple Curved Channel Cooling Plates in Electric-Vehicle Battery Cooling Systems

    … the battery system by generating more efficient cooling plates. These cooling plates are set between battery cells and contain channels that coolant is pumped through. Through optimization of these cooling channels, the efficiency of the cooling plates with regards to the average temperature and …

    queens Repository record for Numerical Design Optimization for Thermal and Pressure Behaviour of Multiple Curved Channel Cooling Plates in Electric-Vehicle Battery Cooling Systems (opens in a new tab)

  15. New concept design for power distribution unit housing within electric truck, achieving ~50% weight reduction

    … today’s solution is a housing with integrated cooling system is and alloy EN AC-AlSi10Mg(Fe) is used as material. The requirements of PDU housing that are covered by EN AC-AlSi10Mg(Fe) are divided into four categories, EMC, electrical, mechanical, and IP requirements. The new concept design is …

    chalmers Repository record for New concept design for power distribution unit housing within electric truck, achieving ~50% weight reduction (opens in a new tab)

  16. Investigation of the Effect of Thermal Interface Materials on the Cooling of Battery Cells: A comparative study on the heat transfer properties

    … Among the effective BTMS approaches, the liquid cooling system stands out, aided by a Thermal Interface Material (TIM) placed between the batteries and the cooling plate. This master thesis, conducted in collaboration with ESS Component and Verification group in Electromobility at Volvo GTT, …

    chalmers Repository record for Investigation of the Effect of Thermal Interface Materials on the Cooling of Battery Cells: A comparative study on the heat transfer properties (opens in a new tab)

  17. Disturbed state constitutive modeling and testing of solders in electronic packaging

    … a vacuum chamber used to prevent the heating and cooling plate from heating and cooling the air in the vacuum chamber and other components to save the energy needed to heat and cool the specimen; a heating and cooling unit composed of four Peltier devices; a digital correlation deformation and …

    arizona-thes Repository record for Disturbed state constitutive modeling and testing of solders in electronic packaging (opens in a new tab)

  18. On apatite fission-track analysis and heat transfer processes in the upper crust

    … sediments recovered at these two sites and the cooling rates of apatite source areas. Site 717 was drilled to a depth of 820 meters below the seafloor (mbsf) bottoming out in upper Miocene strata. Site 718, located approximately 7 km to the south of Site 717 on an adjacent fault block, was …

    texas Repository record for On apatite fission-track analysis and heat transfer processes in the upper crust (opens in a new tab)

  19. Optimization for Fuel Cells/Fuel Cell Stacks Using Combined Methods---CFD Modeling Analysis, and Experiments

    … distribution was then considered to be used in a cooling plate for large fuel cell stacks and a possible method for cooling electronic devices. Details of the heat transfer performance, particularly the temperature distributions, on the heating surface as well as the pressure losses in the …

    arizona-thes Repository record for Optimization for Fuel Cells/Fuel Cell Stacks Using Combined Methods---CFD Modeling Analysis, and Experiments (opens in a new tab)

Page 1 of 2